• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.83-87
• /
• 2003

Zirconium oxide films have been synthesized by radio-frequency magnetron sputtering deposition on n-Si(001) substrate with metal zirconium target at variant $O_2$ partial pressures. The influences of $O_2$ partial pressures of the morphology, deposition rate, microstructure, and the dielectric constant of $ZrO_2$ have been discussed. The results show that deposition rate of $ZrO_2$ films decreases, the roughness, and the thickness of the native $SiO_2$ interlayer increases with the increase of $O_2$ partial pressure. $ZrO_2$ films synthesized at low $O_2$ partial pressure are amorphous and monoclinic polycrystalline in nanometer scale at low $O_2$ partial pressure. The relative dielectrics of $ZrO_2$ films are in the range of 12 to 25.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.1
• /
• pp.29-32
• /
• 2010

In this study, transparent and conductive Al-doped zinc oxide (AZO) films were prepared on a glass substrate by an radio frequency (RF) magnetron sputtering method using a 150-nm-thick AZO target (Al: 2 wt.%) at room temperature. We investigated the effects of RF power between 100-350 W (in steps of 50 W) on the structural, electrical, and optical properties of the AZO films. The thickness and cross-sectional images of the films were observed by field emission scanning electron microscopy. The thicknesses of all films were kept constant at 150 nm and grown on a glass substrate. The grain sizes of the AZO films were determined with the X-ray diffraction by using the Scherrer' equation, and their electrical properties were investigated using a Hall effect electronic transport measurement system. The transmittance of the AZO films was also measured by an ultraviolet-visible spectrometer.

• Journal of the Korean Vacuum Society
• /
• v.18 no.5
• /
• pp.394-401
• /
• 2009

This paper reports the structural and optical properties of ZnO/glass thin films grown by radio-frequency magnetron sputtering with a powder target. In contrast to ZnO ceramic target typically used, a ZnO raw powder target was sputtered in this study. ZnO grew with the (0002) preferred orientation along the surface normal direction. Initially, the surface of ZnO thin films was flat considerably and then it became rougher as the thickness increased. The optical transmittance was as high as 88% in the range of 400-1000 nm. The bandgap energy of 3.23 eV at the 220 nm thick sample was estimated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.5
• /
• pp.488-493
• /
• 2023

The effect of sputtering power on the amorphous Ga₂O₃ thin film deposited using the radio frequency sputtering system was evaluated. Amorphous Ga₂O₃ is cheaper and more efficiently fabricated than crystalline Ga₂O₃, and is studied in various fields such as RRAM, photodetector, and flexible devices. In this study, amorphous Ga₂O₃ was deposited by radio frequency sputtering system and represented a transmittance of over 80% in the visible light region and a homogeneous and dense surface. The optical band gap energy decreased as the sputtering power increased owing to the quantum size effect. Thus, the specific band gap of amorphous Ga₂O₃ can be obtained by adjusting the sputtering power, it indicates amorphous Ga₂O₃ can be used in various fields.

• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.6
• /
• pp.344-349
• /
• 2010

Silicon carbide nanowires were grown by heat treatment of the films at $1200^{\circ}C$ after amorphous SiC thin films were deposited on graphite substrate by radio frequency magnetron sputtering at $600^{\circ}C$. It was confirmed that SiC nanowires with the diameter of 20-60 nm and length of about 50nm were grown from Field Emission Scanning Election Microscope (FE-SEM) and Transmission Election Microscope (TEM) observation. The diameter of nanowires was increased as heat treatment time is increased. The nanowires were identified to ${\beta}$-SiC single crystalline from X-Ray Diffraction(XRD) analysis. It was observed from this study that deposition temperature of samples was critical to the crystallization of nanowires. On the other hand, the effect of deposition time was insignificant.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.577-578
• /
• 2012

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.248.2-248.2
• /
• 2014

In this study, the optical properties and structural characteristics of gallium nitride (GaN) thin films prepared by radio frequency (RF) magnetron sputtering were investigated. Auger electron and X-ray photoelectron spectra showed that the deposited films consisted mainly of gallium and nitrogen. The presence of oxygen was also observed. The optical bandgap of the GaN films was measured to be approximately 3.31 eV. The value of the refractive index of the GaN films was found to be 2.36 at a wavelength of 633 nm. X-ray diffraction data revealed that the crystalline phase of the deposited GaN films changed from wurtzite to zinc-blende phase upon decreasing the sputtering gas pressure. Along with the phase change, a strong dependence of the microstructure of the GaN films on the sputtering gas pressure was also observed. The microstructure of the GaN films changed from a voided columnar structure having a rough surface to an extremely condensed structure with a very smooth surface morphology as the sputtering gas pressure was reduced. The relationship between the phase and microstructure changes in the GaN films will be discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.350.2-350.2
• /
• 2014

We investigated the structural and optical evolution of Ga2O3 thin films on glass substrates deposited using radio frequency magnetron sputtering. Initially, amorphous Ga2O3 thin film is grown, and then, surface humps and nanowire (NW) bundles are gradually formed as the film thickness increases. The surface humps are Ga-rich and provide nucleation sites for NWs through a self-catalytic vapor-liquid-solid mechanism with self-assembled Ga droplets. Both the surface humps and the NWs induce variation of the optical properties such as the optical bandgap and refractive index by absorbing light in the ultraviolet region.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.4
• /
• pp.182-185
• /
• 2010

$Pb_{0.99}[(Zr_{0.6}Sn_{0.4})_{0.9}Ti_{0.1}]_{0.98}Nb_{0.02}O_3$ (PNZST) thin films were deposited by radio frequency magnetron sputtering on a $(La_{0.5}Sr_{0.5})CoO_3$ (LSCO)/Pt/Ti/$SiO_2$/Si substrate using a PNZST target with an excess PbO of 10 mole%. The thin films deposited at the substrate temperature of $500^{\circ}C$ crystallized to a perovskite phase after rapid thermal annealing (RTA). The thin films, which annealed at $650^{\circ}C$ for 10 seconds in air, exhibited good crystal structures and ferroelectric properties. The remanent polarization and coercive field of the fabricated PNZST capacitor were approximately $20uC/cm^2$ and 50 kV/cm, respectively. The reduction of the polarization after $2.2\;{\times}\;10^9$ switching cycles was less than 10%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.290-290
• /
• 2011

In this study Diamond-like carbon (DLC) films were deposited on p-type Si substrates using a Radio-Frequency magnetron Sputtering system. The DLC film was deposited by bombarding graphite target with a N2/Ar plasma mixture with various conditions: substrate, pressure, deposition time, temperature of substrate, power and ratio of gas mixture. The effect on the conduction and hardness of DLC thin films were investigated. The conduction of DLC films were measured by I-V measurement. In addition, Raman analysis was performed to study the chemical bonding structure. The hardness was measured by Nano indentation. Atomic Force Microscopy was used for determined surface morphology of DLC film.