• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.26-26
• /
• 2012

The hydrophobic nature of the wool surface give rise to difficult penetration of dye molecules. Among all the methods of modification, graft polymerization is an attractive method to impart a variety of functional groups to a polymer. Grafting has been made by irradiating the light on the polymer in the presence of a solvent containing monomer. The energy source commonly used are high-energy electrons, X-rays, UV and visible light. UV irradiation is a relatively low-energy radiation in comparison with others since it has the least possibility to change bulk properties. In the present paper, a photo-reactive dye was synthesized from quinizarin by the reaction with methacryloyl chloride. The synthesized dye was continuously grafted onto wool fabric at room temperature by UV irradiation. Several key parameters including UV energy, dye concentration and pH have been examined to understand their influence on the photoreactive coloration.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.373-380
• /
• 2020

This study was carried out to convert the hydrophobic characteristics of PVDF to hydrophilic. Poly(-vinylidene fluorine) (PVDF) was grafted by electron beam irradiation and sulfonated. The grafting degree of modified PVDF increased with the monomer concentration, but not the conversion degree. From the results of FTIR and XPS, it was shown that the amount of converted sulfur increased with the grafting degree. The radiation-induced graft polymerization led to decrease fluorine from 35.7% to 21.3%. Meanwhile, the oxygen and sulfur content increased up to 8.1% and 3.2%. The pore size of modified membranes was shrunken and the roughness sharply decreased after irradiation. The ion exchange capacity and contact angle were investigated to show the characteristics of PVDF. The enhanced ion exchange capacity and lower contact angle of modified PVDF showed that the hydrophilicity played a role in determining membrane fouling. Electron beam irradiation successfully modified the hydrophobic characteristics of PVDF to hydrophilic.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.674-680
• /
• 2023

The brine and seawater are important and largely untapped sources of critical trace metals and elements. The coupling of selective recovery of trace metals from seawater/brine with desalination plants gives an added advantage of energy credits to desalination plants and as well as reduce the cost of desalinated water. In this paper, status review on recovery of important trace metals and other alkali metals from seawater is presented. The potential of Indian desalination plants for recovery of trace metals, based on recovery ratio of 0.35 is also highlighted. Studies carried out by the process based on adsorption using Radiation Induced Grafted (RIG) polymeric adsorbents and then fractional elutions are presented. The fouling factors due to bio fouling and dirt fouling have been estimated for various locations of interest through field trails. The pay loader in the form of compact Contactor Assembly with minimum pressure drop, for loading specially designed radiation grafted sorbent in leaflet form has been briefed, as required for plant scale facility. The typical conceptual process design details of farm assembly of project CRUDE are described.

• 폴리머
• /
• 제36권4호
• /
• pp.525-530
• /
• 2012

본 연구에서는 다양한 조성의 스티렌(styrene, St)과 3-(trimethoxy)propyl methacrylate(TMSPM)를 poly(ethylene-co-tetrafluoroethylene)(ETFE) 필름에 방사선 동시조사법으로 그래프트시킨 후 졸-젤 반응 및 설폰화 반응을 진행하여 실란 가교된 유/무기 복합막을 제조하였다. 졸-젤 반응을 통해 형성된 실란 가교 구조는 Fourier transform infrared spectroscopy(FTIR) 및 thermo gravimetric analysis(TGA)를 사용하여 관찰하였다. 설폰화 관능기를 도입하여 막을 제조한 후 유사한 이온교환용량을 가지면서 TMSPM의 함량이 다른 연료전지막을 선별하여 함수율, 치수 안정성, 수소이온전도도 등의 물성을 측정하였다. 또한 제조된 유/무기 복합막을 이용하여 membrane electrode assemblies(MEA)를 제조한 후 단위전지 성능을 평가하였다.

• Macromolecular Research
• /
• 제13권4호
• /
• pp.327-333
• /
• 2005

pH-sensitive hydrogels were studied as a drug carrier for the protection of insulin from the acidic environment of the stomach before releasing it in the small intestine. In this study, hydrogels based on poly(ethylene oxide) (PEO) networks grafted with methacrylic acid (MAA) or acrylic acid (AAc) were prepared via a two-step process. PEO hydrogels were prepared by ${\gamma}-ray $ irradiation (radiation dose: 50 kGy, dose rate: 7.66 kGy/h), grafted by either MAA or AAc monomers onto the PEO hydrogels and finally underwent irradiation (radiation dose: 520 kGy, dose rate: 2.15 kGy/h). These grafted hydrogels showed a pH-sensitive swelling behavior. The grafted hydrogels were used as a carrier for the drug delivery systems for the controlled release of insulin. Drug-loaded hydrogels were placed in simulated gastric fluid (SGF, pH 1.2) for 2 hr and then in simulated intestinal fluid (SIF, pH 6.8). The in vitro drug release behaviors of these hydrogels were examined by quantification analysis with a UV-Vis spectrophotometer.

• 방사선산업학회지
• /
• 제5권4호
• /
• pp.371-376
• /
• 2011

The surface property of the materials used in tissue engineering application has been essential to regulate cellular behaviors by directing their adhesion on the materials. To modulate surface property of the synthetic biodegradable materials, a variety of surface modification techniques have used to introduced surface functional groups or bioactive molecules, recently polydopamine coating method have been introduce as a facile modification method which can be coated on various materials such as polymers, metals, and ceramics regardless of their surface property. However, there are no reports about the degree of polydopamine coating on the materials with different hydrophilicity. In the present study, we prepared acrylic acid grafted nanofibrous meshes using electron-beam irradiation, and then coated meshes with polydopamine. Polydopamine successfully coated on the all meshes, both properties of acrylic acid and polydopamine were detected on the meshes. In addition, the degree of polydopamine deposition on the materials has been altered according to surface hydrophilicity, which was approximately 8-times greater than those on the non-modified materials. In conclusion, dual effect from the acrylic acid grafting and polydopamine may give a chance as a alternative tool in tissue engineering application.

• Nuclear Engineering and Technology
• /
• 제6권3호
• /
• pp.161-169
• /
• 1974

Nylon직포의 표면을 친수화 하기 위하여 동시조사법으로 Acrylic acid를 방사선 graft중합시켰다. Monomer용액속서 침지된 Nylon직포를 공기중 또는 진공하에서 ${\gamma}$-선으로 조사시켰다. 직포 표면에 형성된 Polyacrylic acid는 10$0^{\circ}C$의 sodium hydroxide용액(0.1%)으로 대부분 추출되었다. 접목 반응된 생성물의 화학적 조성을 측정하였다. 접목반응된 Polymer와 방사선 처리를 하지 않은 polyamide를 비교하여 볼 때 흡수성이라든가 대전성은 증진되었다.

• Nuclear Engineering and Technology
• /
• 제4권2호
• /
• pp.90-101
• /
• 1972

Polyester 직포 표면을 친수화하기 위하여 함침법에 의하여 acrylic acid를 방사선 graft 공중합시켰다. 이때 함침된 직포를 질소에서 Co-60감마선으로 조사하였다. 생성된 Homopolymer는 10$0^{\circ}C$의 물에 의하여 대체로 유출되었다. Graft된 직포는 산성, 염기성 또는 분산염료에 대하여 재래식 저온 침염법에 의해서 염색이 잘 되었다.

• 멤브레인
• /
• 제26권6호
• /
• pp.458-462
• /
• 2016

염수전기분해(saline water electrolysis) 또는 클로로-알칼리 막공정(chlor-alkali membrane process)은 양이온교환막과 전극으로 구성되는 전해셀에 전기를 가하여, 고순도(> 99%)의 고부가가치 화합물(예 : 염소, 수소, 수산화나트륨)을 직접 제조하는 화학공정이다. 염수전기분해의 경제성은 동일한 양의 화합물을 생산하기 위해 투여되는 에너지 소비량을 저감시킴으로 달성될 수 있다. 이러한 이슈는 전해질이나 전극의 고유 저항을 줄이거나, 전해질과 전극 사이의 계면 저항을 감소시킴으로 달성시킬 수 있다. 본 연구에서는 전자빔 동시조사법을 사용하여, 높은 화학적 안정성을 지닌 탄화수소계 술폰산 이오노머 막의 표면에 높은 이온선택성을 갖는 고분자를 접목 시키는 시도가 이루어졌다. 이를 통해, 고분자 전해질 막의 이온전도성을 보완함과 동시에, 전극과의 계면 저항을 감소시켜, 전기화학적 효율 향상이 이루어짐을 관찰하였다.

• 멤브레인
• /
• 제20권2호
• /
• pp.151-158
• /
• 2010

본 연구는 양성전해질막의 금속이온 특성을 조사하기 위하여 Taurine (TAU)막을 제조하였다. 제조방법으로는 방사선조사법에 의한 Glycidyl methacrylate (GMA)의 중공사막 표면위에 고정시키고, 이후 Taurine의 염기성 부분인 $-NH_2$기(amine fuction)와 GMA의 glycididyl의 개환 반응을 통하여 안정된 막을 형성하도록 하였다. 한편 TAU막과 비교를 위해 GMA가 고정된 중공사 막에 Sodium sulfite로 화학적 결합을 형성 SS막을 제조하였다. 이렇게 제조된 TAU막의 타우린 밀도가 높아져도 투과유속은 0.9 m/h로 변화 없으나, SS막은 술폰산기의 밀도가 높아짐에 따라 투과유속이 급격히 감소하는 것을 나타내었다. 타우린 밀도가 0.8 mmol/g인 막을 사용한 결과 금속이온의 량은 Cu > Cd > Mg > Sb > Pb의 순으로 나타내었다. 전반적으로 타우린막은 전화율과 밀도의 증가에 따라 많은 양의 금속이온 흡착과 높은 투과유속을 나타내었다.