• Journal of Adhesion and Interface
• /
• v.11 no.4
• /
• pp.162-167
• /
• 2010

In the present work, the effect of electron beam irradiation on the chemical and thermal characteristics of cellulose-based jute fibers was explored by means of chemical analysis, electron spin resonance analysis, ATR-FTIR spectroscopy, thermogravimetric analysis and thermomechanical analysis. Jute fiber bundles were uniformly irradiated in the range of 2~100 kGy by a continuous method using a conveyor cartin an electron beam tunnel. Electron beam treatment, which is a physical approach to change the surfaces, more or less changed the chemical composition of jute fibers. It was also found that the radicals on the jute fibers can be increasingly formed with increasing electron beam intensity. However, the electron beam irradiation did not change significantly the chemical functional groups existing on the jute fiber surfaces. The electron beam irradiation influenced the thermal stability and thermal shrinkage/expansion behavior and the behavior depended on the electron beam intensity.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.1233-1242
• /
• 2008

The hydration effect on the intrinsic magnetism of natural salmon double-strand DNA was explored using electron magnetic resonance (EMR) spectroscopy and superconducting quantum interference device (SQUID) magnetic measurements. We learned from this study that the magnetic properties of DNA are roughly classified into two distinct groups depending on their water content: One group is of higher water content in the range of 2.6-24 water molecules per nucleotide (wpn), where all the EMR parameters and SQUID susceptibilities are dominated by spin species experiencing quasi one-dimensional diffusive motion and are independent of the water content. The other group is of lower water content in the range of 1.4-0.5 wpn. In this group, the magnetic properties are most probably dominated by cyclotron motion of spin species along the helical π -way, which is possible when the momentum scattering time (${\tau}_k$) is long enough not only to satisfy the cyclotron resonance condition (${\omega}_c{\tau}_k$ > 1) but also to induce a constructive interference between the neighboring double helices. The same effect is reflected in the S-shaped magnetization-magnetic field strength (M-H) curves superimposed with the linear background obtained by SQUID measurements, which leads to larger susceptibilities at 1000 G when compared with the values at 10,000 G. In particular, we propose that the spin-orbital coupling and Faraday's mutual inductive effect can be utilized to interpret the dimensional crossover of spin motions from quasi 1D in the hydrate state to 3D in the dry state of dsDNA.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.3
• /
• pp.312-321
• /
• 2015

Objectives: The purpose of this study was to determine the best method to analyze PAHs at extremely low concentrations. To this end, 16 PAHswere analyzed simultaneously by GC/MS, HPLC/FLD and HPLC/UVD, and the analytical characteristics of HPLC and GC/MS were compared. Methods: This study was conducted by GC/MS and HPLC/FLD/UVD, and evaluated linearity, precision and detection limit. Standard solutions were prepared for 21 samples in the range of $0.00001{\sim}1.0{\mu}g/mL$ and the samples were divided into four groups. All samples were made in three sets and analysis was replicated seven times. Results: Sixteen PAHs could be simultaneously separated by HPLC and GC/MS, and the adequate equipment was HPLC/FLD. The retention times by HPLC were shorter than GC/MS, and HPLC had better separation for most PAHs than GC/MS. The peaks of naphthalene and naphthalene-D8 partially overlapped for GC/MS. HPLC/FLD had a 20-2000 times lower limit of detection than GC/MS and UVD. However FLD was not adequate for analyzing acenaphthylene because it has too low a fluorescence quantum yield to be detected. The precision of HPLC/FLD/UVD and GC/MS showed less than 20% at $0.001{\mu}g/mL$ PAHs and when the concentration was higher, the coefficient of variation was decreased. HPLC/FLD was better for the overall detection of limits. Conclusions: The results indicate that the HPLC/FLD method has good linear range, precision and a detection of limits from $0.00001{\sim}0.0001{\mu}g/mL$ for all 16 PAHs. This study contributes to providing useful data for analysis technology and can be applied to occupational exposure measurement for PAHs in workplaces.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.330-336
• /
• 2002

A quantum-chemical investigation on the conformations and electronic properties of bis[2-{2-methoxy-4,6-di(t-butyl)phenyl}ethenyl]benzenes (MBPBs) as building block for ${\pi}$-conjugate polymer are performed in order to display the effects of t-butyl and methoxy group substitution and of kink(ortho and meta) linkage. The conjugation length of the polymers can be controlled by substituents and kink linkages of backbone. Structures for the molecules, o-, m-, and p-MBPBs as well as unsubstituted o-, m-, and p-DSBs were fully optimized by using semiempirical AM1, PM3 methods, and ab initio HF method with 3-21G(d) basis set. The potential energy curves with respect to the change of single torsion angle are obtained by using semiempirical methods and ab initio HF/3-21G(d) basis set. The curves are similar shape in the molecules with respect to the position of vinylene groups. It is shown that the conformations of the molecules are compromised between the steric repulsion interaction and the degree of the conjugation. Electronic properties of the molecules were obtained by applying the optimized structures and geometries to the ZINDO/S method. ZINDO/S analysis performed on the geometries obtained by AM1 method and HF/3-21G(d) level is reported. The absorption wavelength on the geometries obtained by AM1 method is much longer than that by HF/3-21G(d) level. The absorption wavelength of MBPBs are red shifted with comparison to that of corresponding DSBs in the same torsion angle because of electron donating substituents. The absorption wavelength of isomers with kink(orth and meta) linkage is shorter than that of para linkage.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.10
• /
• pp.1206-1212
• /
• 2009

Growth rates, photosystem II photosynthesis, and the levels of chlorophyll $\alpha$ and secondary metabolites of Chlorella ovalis were estimated to determine if they were enhanced by the addition of swine urine (BM) or cow compost water (EP) that had been fermented by soil bacteria to deep seawater (DSW) in an attempt to develop media that enabled batch mass culture at lower costs. Growth of C. ovalis in f/2, f/2-EDTA+BM60%, DSW+BM30%, and DSW+EP60% was enhanced and maintained in the log phase of growth for 16 days. The cell densities of C. ovalis in DSW+EP60% ($4.1{\times}10^6$ Cells/ml) were higher than those of f/2 ($2.9{\times}10^6$ Cells/ml), f/2-E+BM60% ($3.7{\times}10^6$ Cells/ml), and DSW+BM30% ($2.7{\times}10^6$ Cells/ml). The growth rate was also more favorable for C. ovalis cultured in DSW+EP60% ($0.15\;day^{-1}$) than that of C. ovalis cultured in the control medium (f/2) ($0.12\;day^{-1}$). Furthermore, the chlorophyll a concentration of C. ovalis cultured in DSW+EP60% (4.56 mg/l) was more than 2-fold greater than that of C. ovalis cultured in f/2 (2.35 mg/l). Moreover, the maximal quantum yields of photo system II at 470 nm (Fv/Fm) were significantly higher in organisms cultured at f/2-E+BM60% (0.53) and DSW+EP60% (0.52) than in the other treatment groups. Finally, Fourier transformation infrared (FT-IR) spectroscopy revealed that C. ovalis grown in DSW+EP60% had more typical peaks and various biochemical pool shifts than those grown in other types of media. Taken together, the results of this study indicate that the use of DSW+EP60% to culture C. ovalis can reduce maintenance expenses and promote higher yields.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.42.1-42.1
• /
• 2017

We present the results from an extensive spectroscopic survey of the central region of the nearby galaxy cluster Abell 2199 (A2199) at z=0.03. By combining 775 new redshifts from the MMT/Hectospec observations with the data in the literature, we construct a large sample of 1624 galaxies with measured redshifts at R<30', which redsults in high spectroscopic completeness at $r_{petro,0}$<20.5 (77%). We use these data to study the kinematics and clustering of galaxies, focusing on the comparison with those of the intracluster medium (ICM) from Suzaku X-ray observations. We identify 406 member galaxies of A2199 at R<30' using the caustic technique. The velocity dispersion profile of cluster members appears smoothly connected to the stellar velocity dispersion profile of the cD galaxy. The luminosity function is well fitted with a Schechter function at $M_r$<-15. The radial velocities of cluster galaxies generally agree well with those of the ICM, but there are some regions where the velocity difference between the two is about a few hundred kilometers per second. The cluster galaxies show a hint of global rotation at R<5' with $v_{rot}=300-600kms^{-1}$, but the ICM in the same region does not show such rotation. We apply a friends-of-friends algorithm to the cluster galaxy sample at R<60' and identify 32 group candidates, and examine the spatial correlation between the galaxy groups and X-ray emission. This extensive survey in the central region of A2199 provides an important basis for future studies of interplay among the galaxies, the ICM, and the dark matter in the cluster.

• Progress in Superconductivity
• /
• v.13 no.3
• /
• pp.139-145
• /
• 2012

Electric activity of cardiac muscles generates magnetic fields. Magnetocardiography (or MCG) technology, measuring these magnetic signals, can provide useful information for the diagnosis of heart diseases. It is already about 40 years ago that the first measurement of MCG signals was done by D. Cohen using SQUID (superconducting quantum interference device) sensor inside a magnetically shielded room. In the early period of MCG history, bulky point-contact RF-SQUID was used as the magnetic sensor. Thanks to the development of Nb-based Josephson junction technology in mid 1980s and new design of tightly-coupled DC-SQUID, low-noise SQUID sensors could be developed in late 1980s. In around 1990, several groups developed multi-channel MCG systems and started clinical study. However, it is quite recent years that the true usefulness of MCG was verified in clinical practice, for example, in the diagnosis of coronary artery disease. For the practical MCG system, technical elements of MCG system should be optimized in terms of performance, fabrication cost and operation cost. In this review, development history, technical issue, and future development direction of MCG technology are described.

• Journal of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.581-587
• /
• 1988

The solvolysis of substituted benzyl bromides was studied in binary solvent mixtures of acetone-water and ethanol-water at $25^{\circ}C$ and $45^{\circ}C$. The rate constants increase with electron-donating substituents in benzene ring and increasing of water contents in both of solvent mixtures. The sensitivity parameter (m) of the solvolysis of substituted benzyl bromides to solvent ionizing power (Y) was decreased in going from the electron-donating group to electron-withdrawing one, whereas their nucleophilic sensitivity increased continuously in going to above same substituents. It was shown that electron-donating (electron-withdrawing) groups make the transition state looser (tighter). The above results were consisted with the account for the potential energy surface model and the quantum mechanical approach.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.167-173
• /
• 2013

A series of highly efficient red phosphorescent heteroleptic iridium(III) complexes 1-6 containing two cyclometalating 2-(2,4-substitued phenyl)quinoxaline ligands and one chromophoric ancillary ligand were synthesized: (pqx)$_2Ir$(mprz) (1), (dmpqx)$_2Ir$(mprz) (2), (dfpqx)$_2Ir$(mprz) (3), (pqx)$_2Ir$(prz) (4), (dmpqx)$_2Ir$(prz) (5), (dfpqx)$_2Ir$(prz) (6), where pqx = 2-phenylquinoxaline, dfpqx = 2-(2,4-diflourophenyl)quinoxaline, dmpqx = 2-(2,4-dimethoxyphenyl)quinoxaline, prz = 2-pyrazinecarboxylate and mprz = 5-methyl-2-pyrazinecarboxylate. The absorption, emission, electrochemical and thermal properties of the complexes were evaluated for potential applications to organic light-emitting diodes (OLEDs). The structure of complex 2 was also determined by single-crystal X-ray diffraction analysis. Complex 2 exhibited distorted octahedral geometry around the iridium metal ion, for which 2-(2,4-dimethoxyphenyl)quinoxaline N atoms and C atoms of orthometalated phenyl groups are located at the mutual trans and cis-positions, respectively. The emission spectra of the complexes are governed largely by the nature of the cyclometalating ligand, and the phosphorescent peak wavelengths can be tuned from 588 to 630 nm with high quantum efficiencies of 0.64 to 0.86. Cyclic voltammetry revealed irreversible metal-centered oxidation with potentials in the range of 1.16 to 1.89 V as well as two quasi-reversible reduction waves with potentials ranging from -0.94 to -1.54 V due to the sequential addition of two electrons to the more electron-accepting heterocyclic portion of two distinctive cyclometalated C^N ligands.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.399-405
• /
• 2013

Two series of new green phosphorescent polymers bearing a bis(2-phenyl-pyridine)iridium(III)(dibenzoylmethane) [$(ppy)_2Irdbm$] complex were designed and synthesized. Poly-carbazole (PCbz) derivative or polyfluorene with pendant carbazole groups (PFCbz) were employed as host polymers for the iridium complex. The iridium complex monomer was copolymerized with the host monomers using varying monomer ratios via a Yamamoto coupling reaction. Efficient energy transfer from host to dopant unit was observed by increasing the ratio of the iridium guest in the copolymers. Electroluminescent devices with the configuration ITO/PEDOT:PSS/polymer/BmPyPB/LiF/Al were fabricated and characterized. The phosphorescent polymers composed of the iridium complex guest and polyfluorene with carbazole pendants as a host performed better than the polymers composed of the same guest and the main chain polycarbazole host. A maximum external quantum efficiency of 0.73%, a luminous efficiency of 1.21 cd/A, and a maximum luminance of 372 $cd/m^2$ were obtained from a device fabricated using one of the synthesized copolymers.