• 마이크로전자및패키징학회지
• /
• 제28권4호
• /
• pp.69-72
• /
• 2021

Quantum Dot Light-Emitting Diodes (QLEDs)는 제조 공정이 용액 공정을 기반으로 하기 때문에 잉크젯 공정에 쉽게 적용할 수 있다. 하지만 QLED의 적층은 서로 다른 용매를 사용하는 직교 공정이 필요하기 때문에 잉크젯 인쇄 공정이 더 복잡하며 비용이 상승한다. 따라서 한 번의 공정으로 두 개의 층을 증착하면 제조 단계를 줄일 수 있어 공정 시간이 절감된다. 이 연구에서 우리는 QD와 정공 수송 재료의 혼합물을 사용하여 standard 구조의 QLED를 제작하였다. TFB와 QD를 클로로벤젠에 분산시켜 혼합층에 사용하였고, 소자는 45,850 cd/m²의 최고 휘도를 나타내었다. 이 연구는 잉크젯 프린팅 공정을 적용하여 전계발광 장치를 제작할 수 있는 가능성을 확인하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2004년도 동계학술연구발표회 논문개요집
• /
• pp.219-220
• /
• 2004

Superparamagnetic regions and magnetic anisotropic properties in randomly orientated Co nano dots(NDs) were investigated as a function of dot diameter, spacing, and density. The Co NDs were fabricated by intentionally exposing a laser source on ultra thin film. Various dot sizes are ultimately realized by changing laser power, scan condition, and intial film thickness. Magnetic hysteresis loops, angle-dependent magnetization, and temperature dependence magnetization of the Co NDs were measured with a superconducting quantum interference device. The analysis of magnetization and hysteresis loops was effectively used to determine superparamagnetic regions of the Co NDs. Up to now, the experimentally observed results repeal that room temperature superparamagnetic limit of our Co NDs was about 30 nm in diameter, with the confirmation of high resolution transmission electron microscope.

• 한국자기학회지
• /
• 제5권2호
• /
• pp.119-122
• /
• 1995

SQUID를 이용하여 5-300 K의 온도 범위에서 0.5 T와 1 mT의 자기장에서의 $CuF_{2}.2H_{2}O$ 시료의 자기감수율을 측정하였다. 원소분석에 의하면 이 시료는 비자성 불순물인 칼슘과 마그네슘 불순물을 포함하고 있다. 우리의 측정 결과는 순수한 $CuF_{2}.2H_{2}O$에 대하여 알려진 결과와 차이가 나며 이는 우리 시료 내의 비자성 불순물 효과로 잘 설명된다. 자기감수율의 온도의존성으로부터 유도한 비자성 불순물 농도를 원소분석으로부터 얻은 값과 비교하였다.

• 한국광학회지
• /
• 제17권3호
• /
• pp.278-284
• /
• 2006

본 연구에서는 광통신 시스템에서의 고속변조를 위하여 사용되는 전계광학 변조기를 구현하기 위하여 InAs 양자점(Quantum Dots)을 변조영역으로 하는 전계광학 변조기를 설계, 제작하였다. 제작한 양자점 전계광학 변조기에서 1550 nm의 파장을 가지는 입력광의 변조 특성을 측정하여 벌크(Bulk)형태의 변조영역을 가지는 동일한 구조의 전계광학 변조기와 비교하였다. 위상변조효율은 TE 모드에서 $333.3^{\circ}/V{\cdot}mm$, TM 모드에서 $300^{\circ}/V{\cdot}mm$ 로 측정되었으며, 기존의 벌크로 변조영역이 구성된 전계광학 변조기와 동일한 소자구조를 가지는 전계광학 변조기에 비해 편광의존도가 낮으며 위상변조효율이 20배 이상 향상된 결과를 얻었으며, 양자우물구조에 비하여는 3배 이상의 높은 위상변조효율을 얻었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.263-272
• /
• 2011

Highly luminescent and monodisperse InP quantum dots (QDs) were prepared by a non-organometallic approach in a non-coordinating solvent. Fatty acids with well-defined chain lengths as the ligand, a non coordinating solvent, and a thorough degassing process are all important factors for the formation of high quality InP QDs. By varying the molar concentration of indium to ligand, QDs of different size were prepared and their absorption and emission behaviors studied. By spin-coating a colloidal solution of InP QD onto a silicon wafer, InP QD thin films were obtained. The thickness of the thin films cured at 60 and $200^{\circ}C$ were nearly identical (approximately 860 nm), whereas at $300^{\circ}C$, the thickness of the thin film was found to be 760 nm. Different contrast regions (A, B, C) were observed in the TEM images, which were found to be unreacted precursors, InP QDs, and indium-rich phases, respectively, through EDX analysis. The optical properties of the thin films were measured at three different curing temperatures (60, 200, $300^{\circ}C$), which showed a blue shift with an increase in temperature. It was proposed that this blue shift may be due to a decrease in the core diameter of the InP QD by oxidation, as confirmed by the XPS studies. Oxidation also passivates the QD surface by reducing the amount of P dangling bonds, thereby increasing luminescence intensity. The dielectric properties of the thin films were also investigated by capacitance-voltage (C-V) measurements in a metal-insulator-semiconductor (MIS) device. At 60 and $300^{\circ}C$, negative flat band shifts (${\Delta}V_{fb}$) were observed, which were explained by the presence of P dangling bonds on the InP QD surface. At $300^{\circ}C$, clockwise hysteresis was observed due to trapping and detrapping of positive charges on the thin film, which was explained by proposing the existence of deep energy levels due to the indium-rich phases.

• 한국재료학회지
• /
• 제18권12호
• /
• pp.640-644
• /
• 2008

ZnO/ZnS core/shell nanocrystals (${\sim}5-7\;nm$ in diameter) with a size close to the quantum confinement regime were successfully synthesized using polyol and thermolysis. X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) analyses reveal that they exist in a highly crystalline wurtzite structure. The ZnO/ZnS nanocrystals show significantly enhanced UV-light emission (${\sim}384\;nm$) due to effective surface passivation of the ZnO core, whereas the emission of green light (${\sim}550\;nm$) was almost negligible. They also showed slight photoluminescence (PL) red-shift, which is possibly due to further growth of the ZnO core and/or the extension of the electron wave function to the shell. The ZnO/ZnS core/shell nanocrystals demonstrate strong potential for use as low-cost UV-light emitting devices.

• 센서학회지
• /
• 제29권2호
• /
• pp.105-111
• /
• 2020

Interest and demand for hydrogen sensors are increasing in the field of H₂ leakage detection during storage/transport/use and detection of H₂ dissolved in transformer oil for safety issues as well as in the field of breath analysis for non-invasively diagnosing a number of disease states for a healthy life. In this study, various ZnO-based sensors were synthesized by controlling the reduction in crystallite size, decoration of Pt nanoparticles, doping of electron donating atoms, and doping of various atoms with different ionic radii. The sensing response of the various prepared ZnO-based nanoparticles and quantum dots (QDs) for 10 ppm H₂ was investigated. Among the samples, the smallest-sized (3.5 nm) In³⁺-doped ZnO QDs showed the best sensing response, which is superior to those in previously reported hydrogen sensors based on semiconducting metal oxides. The higher sensing response of In-doped ZnO QDs is attributed to the synergic effects of the increased number of oxygen vacancies, higher optical band gap, and larger specific surface area.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.189-194
• /
• 2010

Compared with organic fluorophores, semiconductor quantum dots (QDs) have the better properties such as photostability, narrow emission spectra coupled to tunable photoluminescent emissions and exceptional resistance to both photo bleaching and chemical degradation. In this work, CdSe/ZnS QDs nanobeads were prepared by the incorporation of CdSe/ZnS QDs with mesoporous silica to use as the optical probe for detecting toxic and bio- materials with high sensitivity, CdSe/ZnS core/shell QDs were synthesized from the precursors such as CdO and zinc stearate with the lower toxicity than pyrotic precursors. The QD-nanobeads were characterized by transmission electron microscopy, FL microscopy, UV-Vis and PL spectroscopy, respectively.

• 한국전기전자재료학회논문지
• /
• 제18권12호
• /
• pp.1069-1074
• /
• 2005

In this work, nano-needle structures ate formed to solve problem, related to low density of quantum dots for nano floating gate memory. Such structures ate fabricated and electrical properties' of MIS devices fabricated on the nano-structures are studied. Nano floating gate memory based on quantum dot technologies Is a promising candidate for future non-volatile memory devices. Nano-structure is fabricated by reactive ion etching using $SF_6$ and $O_2$ gases in parallel RF plasma reactor. Surface morphology was investigated after etching using scanning electron microscopy Uniform and packed deep nano-needle structure is established under optimized condition. Photoluminescence and capacitance-voltage characteristics were measured in $Al/SiO_2/Si$ with nano-needle structure of silicon. we have demonstrated that the nano-needle structure can be applicable to non-volatile memory device with increased charge storage capacity over planar structures.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.226-231
• /
• 2002

The present study discusses the results of the controlled precipitation of HgTe nanocrystals in a PbTe semiconductor matrix and demonstrates its effectiveness in producing well-organized and crystallographically aligned semiconductor nanocrystals. Following the similar procedure used in metallic alloys, the semiconductor alloys are treated at 600$^{\circ}C$ for 48 hours, quenched and aged up to 500 hours at 300$^{\circ}C$ and 450$^{\circ}C$ to induce homogeneous nucleation and growth of HgTe nanocrystalline precipitates. Examination of the resulting precipitates using transmission electron microscopy (TEM) and high resolution TEM (HRTEM) reveals that the coherent HgTe precipitates form as thin discs along the {100} habit planes making a crystallographic relation of {100}$\sub$HgTe///{100}$\sub$PbTe/ and [100]$\sub$HgTe///[100]$\sub$PbTe/. It is also found that the nato-disc undergoes a gradual thickening and a faceting under isothermal aging up to 500 hours without any noticeable coarsening. These results, combined with the extreme dimension of the precipitates (4 nm in length and sub-nanometer in thickness) and the simplicity of the formation process, leads to the conclusion that controlled precipitation is an effective method for the preparation of the desirable quantum-dot nanostructures.