• Steel and Composite Structures
• /
• v.25 no.6
• /
• pp.705-716
• /
• 2017

The objective of this study is to investigate the actual behavior of studs in structures under earthquake load through laboratory tests and numerical simulation. A test program including eighteen specimens was devised with consideration of different concrete strengths and stud diameters. Six of specimens were subjected to monotonically increasing loading while the others were subjected to cyclic loading. Mechanical behavior including the failure mechanism, load-slip relationship, stiffness degradation, energy dissipation and the damage accumulation was obtained from the test results. An accurate numerical model based on the ABAQUS software was developed and validated against the test results. The results obtained from the finite element (FE) model matched well with the experimental results. Furthermore, based on the experimental and numerical data, the design formulas for expressing the skeleton curve were proposed and the simplified hysteretic model of load versus displacement was then established. It is demonstrated that the proposed formulas and simplified hysteretic model have a good match with the test results.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.2
• /
• pp.155-161
• /
• 2019

Recently, increases in major disasters such as fires, earthquakes and typhoons have raised public expectations for safety. In addition to this increase in expectations of safety, the government continues to push for more manpower and better treatment for firefighters who are operating in the disaster scene. Despite the improvement of working conditions and increased welfare for firefighters, however, the incidence and turnover of various mental diseases continues to increase. It is reported that many of the diseases such as post-traumatic stress disorder and the turnover of firefighters are due to a mismatch in individual's personality and work environment. In this study, 108 firefighters were evaluated for their vocational aptitude in the new curriculum. Based on the analysis results, new firefighters were proposed to provide employment and education training improvements, and to provide job security suitable for the individual's personality type through the introduction of the vocational aptitude test for firefighters who are working in the fire service. In addition, we would like to use the vocational aptitude test as a material for reducing post-traumatic stress disorder and increasing turnover through long-term tracking and observation, rather than from a one-off perspective.

• Korean Journal of Applied Biomechanics
• /
• v.33 no.3
• /
• pp.94-100
• /
• 2023

Objective: Few studies have investigated alterations of ground reaction force (GRF) in individuals with chronic ankle instability (CAI) compared with lateral ankle sprain (LAS) copers and healthy controls during walking. This study aimed to investigate differences in GRF variables among the CAI, LAS coper, and control groups. Method: Eighteen individuals with CAI, 18 LAS copers, and 18 healthy controls were recruited for this study. All participants walked on 8-m walkway with a force plate three times. GRF data during stance phase were extracted and analyzed. The analysis of variance and ensemble curve analysis were used for statistical analyses of discrete points and time-series data respectively. Results: The CAI group showed a greater loading rate (LR) and a shorter time to impact peak force than the other groups, as well as decreased vGRF from 56% to 65% in the stance phase than the control group. No significant differences were noted in the other variables. Conclusion: Based on these findings, individuals with CAI should enhance their ability to create propulsion during the push-off phase and spend more time absorbing GRF to decrease the LR, which is considered one of risk factors for overuse injury and ankle osteoarthritis.

• Journal of Space Technology and Applications
• /
• v.3 no.1
• /
• pp.72-85
• /
• 2023

Most Nanosatellites are launched in nanosatellite deployers. Nanosatellites in the deployer are turned off during launch, and they start boot sequence after deploying at their mission orbit. For this reason, nanosatellites must have deployment switch. Most of the nanosatellite deployment switch has two part, first is electric switch to boot the satellite system and second is mechanical assembly to push the switch. In most cases, electric switches are installed in the satellite main body, and the switch operations are translated via the mechanical assembly. These implementations are mechanically complicated and hard to guarantee the appropriate operation without the problems due to friction between pusher and satellite structure. This paper proposes the another implementation method of deployment switch for nanosatellites by installing the electric switch outside the main body without any kind of mechanical parts.

• PNF and Movement
• /
• v.20 no.1
• /
• pp.59-66
• /
• 2022

Purpose: The aim of this research was to verify the relationship between three-dimensional (3D) ground reaction force (GRF) and severity of leg length discrepancy (LLD) while walking at a normal speed. It used a 3D motion analysis system with force platforms in standing workers with LLD. Methods: Subjects comprising 45 standing workers with LLD were selected. Two force platforms were used to acquire 3D GRF data based on a motion analysis system during gait. Vicon Nexus and Visual3D v6 Professional software were used to analyze kinetic GRF data. The subjects were asked to walk on a walkway with 40 infrared reflective markers attached to their lower extremities to collect 3D GRF data. Results: The results indicated the maximal force in the posterior and lateral direction of the long limb occurring in the early stance phase during gait had significant positive correlation with LLD severity (r = 0.664~0.738, p <0.01). In addition, the maximal force medial direction of the long limb occurring in the late stance phase showed a highly positive correlation with the LLD measurement (r = 0.527, p <0.01). Conclusion: Our results indicate that greater measured LLD severity results in more plantar pressure occurring in the foot area during heel contact to loading response of the stance phase and the stance push-off period during gait.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.4
• /
• pp.191-199
• /
• 2008

The purpose of this study was to analyze movement of inline skate players at inline roller skate T300m start so that we can find effective starting movement, and provide basic and scientific materials in improving performance of inline roller skaters for T300m inline roller skating. In doing so, five Korean national representative inline skaters who elected in 2008 Korean National Inline Roller Skating Cup were taped during the cup and analyzed through 3D viewing in terms of their starting movement Conclusions of the analysis were as follows: First, the better the record of starting phase is the shorter average of contact time on track. Second, to improve starting speed, players raised their body just like running instead of lowering them when gliding. players could shorten their strike and moved faster in order to accelerate, and it was more effective to speed up when they quickly switched from running to gliding. Third, the five country-representative players speeded up by bending their knees to a greater degree in order to improve stability. And then the most effective way was believed to minimize track connection of skating at starting in each phase.

• Journal of the Korea Concrete Institute
• /
• v.28 no.4
• /
• pp.419-426
• /
• 2016

This study examined the effect of transverse reinforcement and compressive stress on the shear friction performance at the shear interface intersecting two structural elements with various concrete types. From the prepared 12 push-off test specimens, various characteristics at the interface were measured as follows: crack propagation, shear load-relative slip relationship, initial shear cracking strength, ultimate shear friction strength, and shear transfer capacity of transverse reinforcement. The configuration of transverse reinforcement and compressive strength of concrete insignificantly influenced the amount of relative slippage at the shear friction plane. With the increase of applied compressive stress, the shear friction capacity of concrete tended to increase proportionally, whereas the shear transfer capacity of transverse reinforcement decreased, which was insignificantly affected by the configuration type of transverse reinforcement. The empirical equations of AASHTO-LRFD and Mattock underestimate the shear friction strength of concrete, whereas Hwang and Yang model provides better reliability, indicating that the mean and standard deviation of the ratios between measured shear strengths and predictions are 1.02 and 0.23, respectively.

• Science of Emotion and Sensibility
• /
• v.10 no.3
• /
• pp.393-402
• /
• 2007

The purpose of this study is to provide the design direction based on consumer sensitivity through the structure between product design preferences - sensitivity image - design elements. For the purpose, we selected men's shaver products for this study subject and collected 164 shavers' pictures released between 2001-2007 years. Then, we carried out a pilot test for collection of sensitivity images about shavers, made a survey using semantic differential method and analyzed the survey. According the result, consumers preferred the sensitivity images "luxury, attractive, stable", design elements satisfied the preference images were "form of body is not a circular arcs or a polygon, material is steel, button is push style, and a color of body is not brown." This study can provide a base of the causal relationship between design preferences - sensitivity image - design elements and a design process to predict consumer sensitivity-oriented design.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.2
• /
• pp.131-136
• /
• 2007

In this study, we developed an active ankle-foot orthosis(AAFO) which can control dorsi/ plantar flexion of the ankle joint to prevent foot drop and toe drag during walking. 3D gait analyses were performed on five healthy subjects under three different gait conditions: the normal gait without AFO, the SAFO gait with the conventional plastic AFO, and the AAFO gait with the developed AFO. As a result, the developed AAFO preeminently induced the normal gait compared to the SAFO. Additionally, AAFO prevented foot drop by proper plantarflexion during loading response and provided enough plantarflexion moment as a driving force to walk forward by sufficient push-off during pre-swing. AAFO also could prevent toe drag by proper dorsiflexion during swing phase. These results indicate that the developed AAFO may have more clinical benefits to treat foot drop and toe drag, compared to conventional AFOs, and also may be useful in patients with other orthotic devices.

• Journal of the Korea Concrete Institute
• /
• v.26 no.6
• /
• pp.741-749
• /
• 2014

Prestressed hollow-core (PHC) slabs are structurally-optimized lightweight precast floor members for long-span concrete structures, which are widely used in construction markets. In Korea, the PHC slabs have been often used with cast-in-place (CIP) topping concrete as a composite slab system. However, the PHC slab members produced by extrusion method use concrete having very low slump, and it is very difficult to make sufficient roughness on the surface as well as to provide shear connectors. In this study, a large number of push-off tests was conducted to evaluate interfacial shear strengths between PHC slabs and CIP topping concrete with the key variable of surface roughness. In addition, the horizontal shear strengths specified in the various design codes were evaluated by comparing to the test results that were collected from literature.