Browse > Article
http://dx.doi.org/10.12989/scs.2017.25.6.705

Behavior of headed shear stud connectors subjected to cyclic loading  

Ding, Fa-xing (School of Civil Engineering, Central South University)
Yin, Guo-an (School of Civil Engineering, Central South University)
Wang, Hai-bo (School of Civil Engineering, Central South University)
Wang, Liping (School of Civil Engineering, Central South University)
Guo, Qiang (School of Civil Engineering, Central South University)
Publication Information
Steel and Composite Structures / v.25, no.6, 2017 , pp. 705-716 More about this Journal
Abstract
The objective of this study is to investigate the actual behavior of studs in structures under earthquake load through laboratory tests and numerical simulation. A test program including eighteen specimens was devised with consideration of different concrete strengths and stud diameters. Six of specimens were subjected to monotonically increasing loading while the others were subjected to cyclic loading. Mechanical behavior including the failure mechanism, load-slip relationship, stiffness degradation, energy dissipation and the damage accumulation was obtained from the test results. An accurate numerical model based on the ABAQUS software was developed and validated against the test results. The results obtained from the finite element (FE) model matched well with the experimental results. Furthermore, based on the experimental and numerical data, the design formulas for expressing the skeleton curve were proposed and the simplified hysteretic model of load versus displacement was then established. It is demonstrated that the proposed formulas and simplified hysteretic model have a good match with the test results.
Keywords
headed stud shear connector; push-off test; cyclic loading; energy dissipation; finite element model;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Nie, J.G., Wang, Y.H. and Cai, C.S. (2011), "Experimental Research on fatigue behavior of RC beams strengthened with steel plate-concrete composite technique", J. Struct. Eng., 137(7), 772-781.   DOI
2 Prakash, A., Anandavalli, N., Madheswaran, C.K. and Lakshmanan, N. (2012), "Experimental investigation on flexural behaviour of HSS stud connected steel-concrete composite girders", Steel Compos. Struct., 13(3), 239-258.   DOI
3 Uy, B. (2003), "High-strength steel-concrete composite columns for buildings", Proceedings of the Institution of Civil Engineers - Structures and Buildings, 156(1), 3-14.   DOI
4 Wang, B., Huang, Q. and Liu, X.L. (2017), "Deterioration in strength of studs based on two-parameter fatigue failure criterion", Steel Compos. Struct., 23(2), 239-250.   DOI
5 Wang, Y.H., Nie, J.G. and Cai, C.S. (2013), "Numerical modeling on concrete structures and steel-concrete composite frame structures", Compos. Part B: Eng., 51(8), 58-67.   DOI
6 Wang, Y.H., Nie, J.G. and Li, J.J. (2014), "Study on fatigue property of steel-concrete composite beams and studs", J. Constr. Steel Res., 94(94), 1-10.   DOI
7 Wiese, S., Schnell, J. and Kurz, W. (2011), "Innovative shear connectors in ultra high performance concrete", Beton-und Stahlbetonbau, 106(10), 694-699.   DOI
8 Zhou, T., Jia, Y.M., Xu, M.Y., Wang, X.D. and Chen, Z.H. (2015), "Experimental study on the seismic performance of L-shaped column composed of concrete-filled steel tubes frame structures", J. Constr. Steel Res., 114, 77-88.   DOI
9 Zhu, Z.H., Zhang, L., Bai, Y., Ding, F.X., Liu, J. and Zhou, Z. (2016), "Mechanical performance of shear studs and application in steel-concrete composite beams", J. Centeral South Univ., 23(10), 2676-2687.   DOI
10 BS 5400-5 (1979), Steel, Concrete and Composite Bridges, Part 5: Code of Practice for Design of Composite Bridges, British Standard Institution, London, Britain.
11 Chang, X., Luo, X.L, Zhu, C.X. and Tang, C.A. (2014), "Analysis of circular concrete-filled steel tube support in high ground stress conditions", Tunnel. Underg. Space Technol., 43(3), 41-48.   DOI
12 Gattesco, N. and Giuriani, E. (1996), "Experimental study on stud shear connectors subjected to cyclic loading", J. Constr. Steel Res., 38 (1), 1-21.   DOI
13 Debski, H., Teter, A., Kubiak, T. and Samborski, S. (2016), "Local buckling, post-buckling and collapse of thin-walled channel section composite columns subjected to quasi-static compression", Compos. Struct., 136, 593-601.   DOI
14 Ding, F.X., Yin, G.A., Wang, L.P., Hu, D. and Chen, G.Q. (2017), "Seismic performance of a non-through-core concrete between concrete-filled steel tubular columns and reinforced concrete beams", Thin Wall. Struct., 110, 14-26.   DOI
15 Ding, F.X., Ying, X.Y., Zhou, L.C. and Yu, Z.W. (2011), "Unified calculation method and its application in determining the uniaxial mechanical properties of concrete", Front. Arch. Civil Eng., 5(3), 381-393.   DOI
16 EN 1994-1-2 (2004), Design of composite steel and concrete structures, Part 1.1: General rules and rules for buildings-General rules, European Committee for Standardization; Brussels, Brussels.
17 Fang, G.S., Wang, J.Q., Li, S. and Zhang, S.B. (2016), "Dynamic characteristics analysis of partial-interaction composite continuous beams", Steel Compos. Struct., 21(1), 195-216.   DOI
18 GB/T 228-2010 (2010), Metallic materials-Tensile testing at ambient temperature, Ministry of Housing and Urban-Rural Development of the People's Republic of China; Beijing, China.
19 GB/T 50081-2016 (2016), Standard for test method of mechanical properties on ordinary concrete, Ministry of Housing and Urban-Rural Development of the People's Republic of China; Beijing, China.
20 Hanswille, G., Porsch, M. and Ustundag, C. (2007a). "Resistance of headed studs subjected to fatigue loading: Part I: Experimental study", J. Constr. Steel Res., 63(4), 475-484.   DOI
21 Hanswille, G., Porsch, M. and Ustundag, C. (2007b). "Resistance of headed studs subjected to fatigue loading: Part II: Analytical study", J. Constr. Steel Res., 63(4), 485-493.   DOI
22 Hu, H.S., Nie, J.G. and Wang, Y.H. (2016), "Shear capacity of concrete-filled steel plate composite coupling beams", J. Constr Steel Res., 118, 76-90.   DOI
23 Ju, X.C. and Zeng, Z.B. (2015), "Study on uplift performance of stud connector in steel-concrete composite structures", Steel Compos. Struct., 18(5), 1279-1290.   DOI
24 Liu, J., Ding, F.X., Liu, X.M. and Yu, Z.W. (2016), "Study on flexural capacity of simply supported steel-concrete composite beam", Steel Compos. Struct., 21(4), 829-847.   DOI