Browse > Article
http://dx.doi.org/10.4334/JKCI.2014.26.6.741

Evaluation of Horizontal Shear Strength of Prestressed Hollow-Core Slabs with Cast-in-Place Topping Concrete  

Im, Ju-Hyeuk (Dept. of Architectural Engineering, University of Seoul)
Park, Min-Kook (Dept. of Architectural Engineering, University of Seoul)
Lee, Deuck-Hang (Dept. of Architectural Engineering, University of Seoul)
Seo, Soo-Yeon (Dept. of Architectural Engineering, Korea National University of Transportation)
Kim, Kang-Su (Dept. of Architectural Engineering, University of Seoul)
Publication Information
Journal of the Korea Concrete Institute / v.26, no.6, 2014 , pp. 741-749 More about this Journal
Abstract
Prestressed hollow-core (PHC) slabs are structurally-optimized lightweight precast floor members for long-span concrete structures, which are widely used in construction markets. In Korea, the PHC slabs have been often used with cast-in-place (CIP) topping concrete as a composite slab system. However, the PHC slab members produced by extrusion method use concrete having very low slump, and it is very difficult to make sufficient roughness on the surface as well as to provide shear connectors. In this study, a large number of push-off tests was conducted to evaluate interfacial shear strengths between PHC slabs and CIP topping concrete with the key variable of surface roughness. In addition, the horizontal shear strengths specified in the various design codes were evaluated by comparing to the test results that were collected from literature.
Keywords
prestressed hollow-core slab; cast-in-place; topping concete; shear; horizontal shear strength; design code;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Kim, K. S., Lee, D. H., Park, M. K., and Im, J. H., Development of Enhancement Techniques on Shear Strength of Hollow-core Slab and its Composite Action with Topping Concrete, SAMSUNG C&T Technical Report, 2012, pp. 212.
2 Becker, R.J. and Buettner, D.R., "Shear Tests of Extruded Hollow Core Slabs", PCI Journal, Vol. 30, No. 2, 1985, pp. 40-54.   DOI
3 Hawkins, N.M. and Ghosh, S.K., "Shear Strength of Hollow- Core Slabs", PCI Journal, Vol. 51, No. 1, 2006, pp. 110-114.   DOI
4 Im, J.H., Park, M.K., Lee, D.H., Kim, K.S., Seo, S.Y., and Jang, S.Y., "Effect of Effective Prestress on Shear Capacity of Hollow-Core Slab Units", Advanced Science Letter, Accepted for Publication, 2012.
5 Mones, R.M. and Brena, S.F., "Hollow-Core Slabs with Cast-In-Place Concrete Toppings: A Study of Interfacial Shear Strength", PCI Journal, Vol. 58, No. 3, 2013, pp. 124-141.   DOI
6 Pajari, M., "Web Shear Failure in Pprestressed Hollow Core Slabs", Journal of Structural Engineering, Vol. 42, No. 4, 2009, pp. 83-104.
7 Palmer, K.D. and Schultz, A.E., "Factors Affecting Web-shear Capacity of Deep Hollow-Core Units", PCI Journal, Vol. 55, No. 2, 2010, pp. 123-146.   DOI
8 Palmer, K.D. and Schultz, A.E., "Experimental Investigation of the Web-shear Strength of Deep Hollow-Core Units", PCI Journal, Vol. 56, No. 3, 2011, pp. 83-104.   DOI
9 Korea Concrete Institute, Concrete Design Code, Kimoondang Publishing Company, 2012, pp. 342.
10 AASHTO LRFD, AASHTO LRFD Bridge Design Specifications, 4th ed., American Association of State Highway and Transportation Officials, Washington, D.C., 2007.
11 ACI Committee 318, Building Code Requirements for Reinforced Concrete and Commentary (ACI 318M-11), American Concrete Institute, Detroit, 2011, pp. 503.
12 British Standard Institute, Structural Use of Concrete - Part 1 Code of Practice for Design and Construction, BS 8110-1: 1997, London, 1997, pp. 163.
13 European Committee for Standardization (CEN), Eurocode 2: Design of Concrete Structure. Part 1-1: General Rules and Rules for Buildings, EN 1992-1-1:2004, Brussels, 2004, pp. 225.
14 Mattock, A.H. and Kaar, P.H., "Precast-Prestressed Concrete Bridges, 4 - Shear Tests of Continuous Girders", Journal of the PCA Research and Development Laboratories, Portland Cement Association, Vol. 3, No. 1, 1961, pp. 47-56.
15 PCI Industry Hand Book Committee, PCI Design Handbook, 7th ed., Precast/Prestressed Concrete Institute, 2010.
16 Anderson, A.R., "Composite Designs in Precast and Cast-in-Place Concrete", Progressive Architecture, Vol. 41, No. 9, 1960, pp. 172-179.
17 Hanson, N.W., "Precast-Prestressed Concrete Bridges 2. Horizontal Shear Connections", Journal of the PCA Research and Development Laboratories, Vol. 2, No. 2, 1960, pp. 38-58.
18 Lee, S. S., Hong, S. Y., Park, K. S., and Bae, K. W., "Evaluation of Horizontal Shear Strength for Cotter Type Surface Roughness of Hollow Core Slab", Journal of the architectural institute of Korea Structure & Construction, Vol. 28, No. 8, 2012, pp. 61-68.   과학기술학회마을
19 Aziz, R.J., "Shear Capacity of Concrete Prisms with Interface Joints", Journal of Engineering, Vol. 16, No. 2, 2010, pp. 5084-5097.
20 Gohnert, M., "Horizontal Shear Transfer Across a Roughened Surface", Cement & Concrete Composites, Vol. 25, No. 3, 2003, pp. 379-385.   DOI   ScienceOn
21 Wallenfelsz, J.A., "Horizontal Shear Transfer for Full-Depth Precast Concrete Bridge Deck Panels", Master Thesis, Virginia Polytechnic Institute and State University, 2006, pp. 111.
22 Djazmati, B. and Pincheira, J.A., "Shear Stiffness and Strength of Horizontal Construction Joints", ACI Structural Journal, Vol. 101, No. 4, 2004, pp. 484-493.