• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2744-2749
• /
• 2008

Numerical calculations are carried out for the natural convection induced by temperature difference between a cold outer square cylinder and a hot inner circular cylinder for Rayleigh number of $Ra=10^7$. This study investigates the effect of the inner cylinder location on the heat transfer and fluid flow. The location of inner circular cylinder ($\delta$) is changed vertically along the center-line of square enclosure. The natural convection bifurcates from unsteady to steady state according to $\delta$. Two critical positions of ${\delta}_{C,L}$ and ${\delta}_{C,U}$ as a lower bound and an upper bound are ${\delta}_{C,L}=0.05$ and ${\delta}_{C,U}=0.18$, respectively. Within the defined bounds, the thermal and flow fields are steady state. When the inner cylinder locates at ${\delta}{\geq}{\delta}_{C,U}$, the space between the upper surface of inner cylinder and the top surface of the enclosure forms a relatively shallow layer where the natural convection characterized as the pure Rayleigh-Benard convection forms alternately the upwelling and downwelling plums, as a result that a series of cells known as Benard cells is derived.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.801-809
• /
• 2016

The electrically excited synchronous generator (EESG) is applied in wind turbine systems recently. In an EESG control system, electrical torque is affected by stator flux and rotor current. So the control system is more complicated than that of the permanent-magnet synchronous generator (PMSG). Thus, the higher demanding of the control system is required especially in case of wind turbine mechanical resonance. In this paper, the mechanism of rotor speed resonant phenomenon is introduced from the viewpoint of mechanics firstly, and the characteristics of an effective damping torque are illustrated through system eigenvalues analysis. Considering the variables are tightly coupled, the four-order small signal equation for torque is derived considering stator and rotor control systems with regulators, and the bode plot of the closed loop transfer function is analyzed. According to the four-order mathematical equation, the stator flux, stator current, and electrical torque responses are derived by torque reference step and ramp in MATLAB from a pure mathematical deduction, which is identical with the responses in PSCAD/EMTDC simulation results. At last, the simulation studies are carried out in PSCAD software package to verify the resonant damping control strategy used in the EESG wind turbine system.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.9
• /
• pp.235-242
• /
• 2021

Most data scrambling schemes generate pure random codes. Unlike these schemes, we propose a variable density scrambling scheme (VDSC) that differentiates densities of generated codes. First, we describe conditions and methods to translate plain codes to cipher codes with different densities. Then we apply the VDSC to flash memory such that preferred cell states occur more than others. To restrain error rate, specifically, the VDSC controls code densities so as to increase the ratio of center state among all possible cell states in flash memory. Scrambling experiments of data in Windows and Linux systems show that the VDSC increases the ratio of cells having near-center states in flash memory.

• Nuclear Engineering and Technology
• /
• v.51 no.7
• /
• pp.1842-1852
• /
• 2019

The AP1000 reactor coolant pump is a vertical shielded-mixed flow pump, is the most important coolant power supply and energy exchange equipment in nuclear reactor primary circuit system, whose steadystate and transient performance affect the safety of the whole nuclear island. Moreover, safety demonstration of reactor coolant pump is the most important step to judge whether it can be practiced, among which software simulation is the first step of theoretical verification. This paper mainly introduces the fluid-solid coupling simulation method applied to reactor coolant pump, studying the feasibility of simulation results based on workbench fluid-solid coupling technology. The study found that: for the unsteady calculations of the pure liquid media, the average head of the reactor coolant pump with bidirectional fluid-solid coupling decreases to a certain extent. And the coupling result is closer to the real experimental value. The large stress and deformation of rotor under different flow conditions are mainly distributed on impeller and idler, and the stress concentration mainly occurs at the junction of front cover plate and blade outlet. Among the factors that affect the dynamic stress change of rotor, the pressure load takes a dominant position.

• Journal of the Korean Society for Heat Treatment
• /
• v.32 no.3
• /
• pp.124-130
• /
• 2019

Friction stir welding is one of the interesting welding methods for titanium and its alloy which proceeds with plastic flow due to thermo-mechanical stirring and friction heat. Solid-state welding can solve severe problems such as high-temperature oxidation, interstitial oxygen diffusion and grain coarsening by liquid-state welding. Dynamic recrystallization and grain refinement can vary significantly with the plunging load and rotational speed of tool during friction stir welding, and suitable process conditions must be optimized to obtain microstructure and better mechanical characteristics. Suitable FSW conditions were 1000 kg of plunging load and 200 rpm of rotational speed and it showed YS 270 MPa, UTS 332.1 MPa, and El 17.3%, which were very similar to those of wrought titanium sheet.

• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1546-1552
• /
• 2018

The polymer nanocomposite as a gate dielectric film was prepared via sol-gel method. The formation of crosslinked structure among nanofillers and polymer matrix was proved by Fourier transform infrared spectroscopy (FT-IR). Differential thermal analysis (DTA) results showed significant increase in the thermal stability of the nanocomposite with respect to that of pure polymer. The nanocomposite films deposited on the p- and n-type Si substrates formed very smooth surface with rms roughness of 0.045 and 0.058 nm respectively. Deconvoluted $Si_{2s}$ spectra revealed the domination of the Si-OH hydrogen bonds and Si-O-Si covalence bonds in the structure of the nanocomposite film deposited on the p- and n-type Si semiconductor layers respectively. The fabricated n-channel field-effect-transistor (FET) showed the low threshold voltage and leakage currents because of the stronger connection between the nanocomposite and n-type Si substrate. Whereas, dominated hydroxyl groups in the nanocomposite dielectric film deposited on the p-type Si substrate increased trap states in the interface, led to the drop of FET operation.

• Journal of Powder Materials
• /
• v.28 no.4
• /
• pp.287-292
• /
• 2021

In this study, the layered structures of immiscible Fe and Cu metals were employed to investigate the interface evolution through solid-state mixing. The pure Fe and Cu powders were cold-consolidated by high-pressure torsion (HPT) to fabricate a layered Cu-Fe-Cu structure. The microstructural evolutions and flow of immiscible Fe and Cu metals were investigated following different iterations of HPT processing. The results indicate that the HPT-processed sample following four iterations showed a sharp chemical boundary between the Fe and Cu layers. In addition, the Cu powders exhibited perfect consolidation through HPT processing. However, the Fe layer contained many microcracks. After 20 iterations of HPT, the shear strain generated by HPT produced interface instability, which caused the initial layered structure to disappear.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.2
• /
• pp.78-81
• /
• 2015

Pure ZnO and ZnO nanowires doped with 3 wt.% Ga (‘3GZO’) were grown by pulsed laser deposition in a furnace system. The doping of Ga in ZnO nanowires was analyzed by observing the optical and chemical properties of the doped nanowires. The diameter and length of nanowires were under 200 nm and several ${\mu}m$, respectively. Changes of significant resistance were observed and the sensitivities of ZnO and 3GZO nanowires were compared. The sensitivities of ZnO and 3GZO nanowire sensors measured at 300℃ for 1 ppm of ethanol gas were 97% and 48%, respectively.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.6
• /
• pp.859-872
• /
• 2008

In this paper, the problem of partial asymptotic stabilization of nonlinear control cascaded systems with integrators is considered. Unfortunately, many controllable control systems present an anomaly, which is the non complete stabilization via continuous pure-state feedback. This is due to Brockett necessary condition. In order to cope with this difficulty we propose in this work the partial asymptotic stabilization. For a given motion of a dynamical system, say x(t,$x_0,t_0$)=(y(t,$y_0,t_0$),z(t,$z_0,t_0$)), the partial stabilization is the qualitative behavior of the y-component of the motion(i.e., the asymptotic stabilization of the motion with respect to y) and the z-component converges, relative to the initial vector x($t_0$)=$x_0$=($y_0,z_0$). In this work we present new results for the adding integrators for partial asymptotic stabilization. Two applications are given to illustrate our theoretical result. The first problem treated is the partial attitude control of the rigid spacecraft with two controls. The second problem treated is the partial orientation of the underactuated ship.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.121-124
• /
• 1997

Emergence of advanced materials has been realized by the great demands for sophisticated state devices in high technology industry. It is the ear of speedy evolution of science and technology, in particular, materials processing technology, which enables us to synthesize any materials with respect to its purity and its perfection of crystal structure and shape (form) that have, heretofore not been available. The availability of ultra pure, fine raw materials, single crystals and thick/thin film materials has been largely responsible for such startling progresses that have been made in the realization of unforeseen, functional devices for high technology industry. Of the functional devices such as passive as active devices, non-silicon devices are mostly passive. Piezoelectric, electro-optic, magneto-optic devices, etc. are some of the examples. In this paper, magneto-optic materials for Faraday device, which is little known, are reviewed including its processing toward practical applications.