• 한국기후변화학회지
• /
• 제4권1호
• /
• pp.63-75
• /
• 2013

본 연구의 목적은 에너지 절감 및 온실가스 감축을 위해 수도사업장에 도입된 펌프 스케쥴링 시스템의 온실가스 감축 효과를 객관적으로 분석하는데 있다. 이 목적을 달성하기 위해서 온실가스 감축량 산정시 CDM 방법론 AMS-II.C/Version 13을 적용하였다. 베이스라인과 프로젝트 배출량을 산정하기 위해 사업 전후의 유량, 흡수정과 써지탱크의 수위 차, 전력량 데이터를 이용하였다. 감축량 산정의 정확성을 높이기 위해 펌프 운영과 연관성이 적은 소내 소비 전력과 계통손실도 고려하여 계산하였다. 본 연구에서 적용된 방법론과 계산식은 수도사업장에서 온실가스 감축을 위해 적용되는 타 기술의 감축량 산정 시에도 일정 부분 적용 가능할 것으로 판단된다.

• 신재생에너지
• /
• 제17권3호
• /
• pp.32-41
• /
• 2021

A groundwater source heat pump (GWHP) was developed in this study by adapting a borehole heat exchanger with closed-loop and open-loop systems in a new building. In the pilot test building, the air-conditioning on the second floor was designed to employ a closed-loop system and that on the third floor had an open-loop system. The GWHP design is based on the feasibility of groundwater resources at the installation site. For the hydrogeological survey of the study site, pumping and injection tests were conducted, and the feasibility of GWHP installation was evaluated based on the air-conditioning load demand of the building. The site was found to be satisfactory for the design capacity of the thermal load and water quality. In addition, the effect of groundwater movement on the performance of the closed-loop system was tested under three different operational scenarios of groundwater pumping. The performance of the system was sustainable with groundwater flow but declined without appropriate groundwater flow. From long-term observations of the operation, the aquifer temperature change was less than 2℃ at the observation well and 5℃ at the injection well with respect to the initial groundwater temperature. This pilot study is expected to be of guidance for developing GWHPs at fractured rock aquifers.

• 한국분무공학회지
• /
• 제27권3호
• /
• pp.117-125
• /
• 2022

This study examines whether engine fuel efficiency is improved by optimization of the exhaust valve timing in a state where the intake valve timing has been optimized in a small turbo gasoline engine that has intake cams and exhaust cams with fixed valve opening periods. When the exhaust valve is opened late, the expansion stroke is longer, and the efficiency can be improved. A 2-cylinder turbo gasoline engine with 0.8 liters of displacement and an MPI (Multi Point Injection) fuel system was used. The engine was operated at 1,500 and 3,000 rpm, and the load conditions included a partial load of 50 N·m and a high load of 70 N·m. Data was recorded as the exhaust valve timing was controlled, and this was used to calculate the efficiency of combustion using a heat release, the fuel conversion efficiency, and the pumping loss. Results and the hydrocarbon concentrations in the exhaust gas were compared for each condition. Experiment results confirmed that additional fuel efficiency improvements are possible through exhaust valve timing control at 1,500 rpm and 50 N·m. However, in other operating conditions, fuel efficiency improvements could not be obtained through exhaust valve timing control because cases where the pumping loss and fuel/air mixture slip increased when the exhaust valve timing changed and the fuel efficiency declined.

• 대한토목학회논문집
• /
• 제29권3B호
• /
• pp.213-219
• /
• 2009

밀집도시에서 하수도, 건물, 제방 등과 같은 형상은 흐름이나 범람류의 전파에 영향을 미치므로 이러한 요소들은 도시지역의 범람 모델을 구축하는데 있어서 고려되어야 할 것이다. 도시지역의 2차원 범람모형은 현재 홍수범람 분야에서 가장 중요하게 적용되고 있지만, 이러한 모델은 지형적인 부정확한 변수 및 부정확하고 불충분한 자료 때문에 매우 제한적인 모델이라 할 수 있다. 본 연구에서는 시가지 침수심을 모의 계산하기 위해 유역 유출 모형, 2차원 시가지 모형 그리고 하수도 모형을 통합하여 2002년 침수피해를 입은 바 있는 삼척지역에 적용하여 건물 및 배수 펌프용량이 침수심에 미치는 영향에 대해 분석하였다. 그 결과 침수심은 배수용량에 직접적으로 영향을 받으며 또한 0.2-0.6 범위의 건물 점유율에 대한 침수심은 약 20-30 cm가 증가되는 것으로 나타났다.

• 대한치과보철학회지
• /
• 제51권1호
• /
• pp.11-19
• /
• 2013

연구 목적: 본 연구에서는 수술가이드를 이용한 무피판 임플란트 술식에서 임플란트 드릴링이 열발생에 미치는 효과를 측정하였으며 드릴링 방법에 따른 온도 차이를 측정하고자 하였다. 연구 재료 및 방법: 하악 양측 제 1 대구치와 제 2 대구치가 없는 실험 모델에서 피판을 거상하는 임플란트 수술(실험A군)과 수술가이드를 이용한 무피판 임플란트 수술(실험B군), 그리고 핸드피스의 상하 수직 움직임을 제한한 후 수술가이드를 이용하여 무피판 임플란트 수술(실험C군)을 각각 진행하여 온도 측정을 하였다. 임플란트 드릴링 시 온도 측정은 thermocouple과 열전식 온도 기록계(Yokogawa, Tokyo, Japan)를 이용하여 측정하였다. 온도 측정 위치는 최종 임플란트 드릴(직경 3.8 mm)의 경계부에서 0.5 mm 떨어진 곳에서 3 mm 깊이(설측)와 6 mm 깊이(협측)로 하였다. 측정된 온도 값을 이용하여 종속변수인 온도가 정규분포 하는지를 검정하기 위해 Kolmogorov-Smirnov test를 거쳐 확인한 후 세 수술 방법 간의 평균 온도 차이를 검정하기 위해 independent t-test로 분석하였다. 결과: 피판을 거상하고 드릴링을 한 수술군(실험A군)에서 평균 온도는 $27.2^{\circ}C$($SD{\pm}2.1^{\circ}C$)를 보였고 피판을 거상하지 않고 드릴링을 한 수술군(실험B군)에서 평균 $27.5^{\circ}C$($SD{\pm}2.3^{\circ}C$)를 나타냈다. 이들 두 수술 방법 간 온도비교에서는 통계학적으로 유의한 차이를 보이지 않았다. 수술가이드를 이용하여 무피판 수술 시 상하 수직 움직임(upand-down pumping motion)이 없이 드릴링을 시행한 수술군(실험C군)에서 평균온도는 $37.0^{\circ}C$($SD{\pm}3.4^{\circ}C$)을 보였다. 이를 상하 수직 움직임으로 드릴링을 한 무피판 임플란트 수술군(실험B군)과 비교 시 통계학적으로 유의한 온도 차이를 보였다. 결론: 수술가이드를 이용하여 무피판 임플란트 수술 시 핸드피스를 상하 수직 움직임으로 드릴링을 시행하면 피판을 거상하여 수술할 때와 온도차이가 발생하지 않으나, 상하 수직 움직임 없이 드릴링을 시행하면 드릴링 시 높은 온도 상승을 보인다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.764-767
• /
• 2004

This paper present the temperature control of aluminum plate using Peltier element. Peltier effect is heat pumping phenomena by electric energy as one of the thermoelectric effect. So if current is asserted to Peltier element, it absorbs heat from low temperature side and emits to high temperature side. In this experiment, Peltier element is used to control the temperature of small aluminum plate with ON/OFF control scheme and fan ON/OFF. As the result of experiments, it is proper to act fan only while cooling duration and there exist a proper cooling current to drop temperature rapidly. It takes about 100sec to increase to 7$0^{\circ}C$ and drop to 35$^{\circ}C$ of aluminium plate temperature and about 90sec to increase to 7$0^{\circ}C$ and drop to 4$0^{\circ}C$ in ambient temperature 3$0^{\circ}C$ while fan is on only in cooling duration. Future aim is to realize more rapid temperature control and develop SMHA(special metal hydride actuator) by using Peltier element to heating and cooling.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1400-1404
• /
• 2005

This paper presents the temperature control of aluminum plate by using Peltier element. Peltier effect is heat pumping phenomena by electric energy as one of the thermoelectric effect. So if current is charged to Peltier element, it absorbs heat from low temperature side and emits heat to high temperature side. In this experiment, Peltier element is used to control the temperature of small aluminum plate with current control and operating cooling fan only while cooling duration. Operating cooling fan only while cooling duration is proper to get more rapid heating and cooling duration. As a result of experiment, it takes about 100sec period to repeating temperature between $35^{\circ}C$ and $70^{\circ}C$ and about 80sec from $40^{\circ}C$ to $70^{\circ}C$ in ambient air temperature $25^{\circ}C$ and while operating cooling fan only in cooling duration. Future aim is to apply this temperature control method in actuating SMHA(special metal hydride actuator) which is applicable in Siver project acting in low frequency range by using Peltier element for heating and cooling.

• Geomechanics and Engineering
• /
• 제19권5호
• /
• pp.447-462
• /
• 2019

The vacuum preloading method has been used in many countries for ground improvement and land reclamation works. A sand cushion is required as a horizontal drainage channel for conventional vacuum preloading. In terms of the dredged-fill foundation soil, the treatment effect of the conventional vacuum preloading method is poor, particularly in Tianjin, China, where a shortage of sand exists. To solve this problem, straight-line vacuum preloading without sand is widely adopted in engineering practice to improve the foundation soil. Based on the engineering properties of dredged fill in Lingang City, Tianjin, this paper presents field instrumentation in five sections and analyzes the effect of a prefabricated vertical drain (PVD) layout and a vacuum pumping method on the soft soil ground treatment. Through the arrangement of pore water pressure gauges, settlement marks and vane shear tests, the settlement, pore water pressure and subsoil bearing capacity are analyzed to evaluate the effect of the ground treatment. This study demonstrates that straight-line vacuum preloading without sand can be suitable for areas with a high water content. Furthermore, the consolidation settlement and consolidation degree system is developed based on the grey model to predict the consolidation settlement and consolidation degree under vacuum preloading; the validity of the system is also verified.

• PNF and Movement
• /
• 제19권3호
• /
• pp.441-449
• /
• 2021

Purpose: The purpose of this study was to investigate the effect of strength training combined with blood flow restriction on leg muscle thickness in children with cerebral palsy. Methods: Nineteen children with cerebral palsy, aged between five and 10 years of age, living in area N, were recruited. Ten participants were classified into a blood flow restriction group and nine into a strength exercise group. The experimental group performed strength training using a blood flow restriction cuff on the leg, and the control group performed strength training without blood flow restriction. A paired t-test was performed to confirm intragroup changes before and after five weeks of the experiment, and an independent t-test was performed to confirm intergroup changes, and the significance level was α=0.05. Results: The rectus femoris, gastrocnemius and gluteus medius muscles showed significant differences in the groups after five weeks (p<0.05). There was a significant difference between the groups in the rectus femoris and gastrocnemius after five weeks (p<0.05). Conclusion: As a result of this study, it was found that strength training combined with blood flow restriction had a positive effect on the changes in leg muscle thickness in children with cerebral palsy. This suggests the possibility of using it in the future as basic data for strength training methods and blood flow restriction exercises for children with cerebral palsy.

• 한국농공학회논문집
• /
• 제61권4호
• /
• pp.55-61
• /
• 2019

Motor pumps cannot be used in those areas where electricity is not accessible such as remote rural areas in many African countries. Hydraulic ram pump is one of the solutions for supplying water for irrigation or domestic uses. The hydraulic ram pumps are working based on the water hammer effect for pumping without external power or electricity. This study was conducted to investigate the effect of air chamber volume and operation parameters on the performance of the hydraulic ram pump which was assembled with common plumbing parts. The experimental results showed the volume of the air chamber did not affect the performance such as discharge rate and head. When drive heights were 1.7 and 2.35 m, the maximum discharge heads were up to 7 m and 10 m, respectively. When the air chamber volume was 1 L, discharge rates were 0.23 and 2.12 L/min under the drive heights of 1.7 and 2.35 m, respectively. The average energy efficiency of the hydraulic ram pump assembled in this study was about 60% for all the experimental conditions.