• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.1
• /
• pp.12-17
• /
• 2006

A steam generator of nuclear power plant has thousands of thin tubes. These tubes play an important role in maintaining the pressure boundary between the primary and secondary side of nuclear power plant. The steam generator tube is easy to be damaged because of the severe operating conditions such as the high temperature and pressure. Therefore, tremendous efforts are made to assess the structural integrity of the steam generator tubes. The eddy current test is the most popular non-destructive test to assess the integrity of the tubes. However, the eddy current test has the limitation to size the flaw accurately because the eddy current signal behavior depends on the total volume of flaw. This paper shows the possibility that the ultrasonic test method can be applied to detect the flaws in the steam generator tubes and to measure them quantitatively. From the test results, it is expected that if the ultrasonic test is put to practical use in the steam generator tube inspection, the inspection results will be improved.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.83-88
• /
• 2012

The pitch searching is a very important process in a vocoder. Generally, the method of pitch searching method is used by highlighting the periodicity, where a correlation is identified with the signal by changing the interval of two pulses. When the correlation value is highest, the pitch can be found by the pulse interval because it is the repetition interval with most striking period. There are many methods to solve this problem and search the pitch by dividing a frame into many subframes, but there is too much calculation to solve. A method in this paper is suggested to vary the number of subframes by predicting the amplitude change rate in a frame. If this method is applied, the general pitch searching performance will be improved because the accuracy may be enhanced without affecting the sound quality in the synthesized signal after parameter transmission; and the pitch searching time may be reduced.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1249-1258
• /
• 2006

Two-dimensional(2-D) radar images, namely, ISAR images from a maneuvering target include unwanted phase errors due to the target's motion. These phase errors make ISAR images to be blurred. The ISAR autofocus technique is required in order to remove these unwanted phase errors. Unless those unwanted phase errors produced by the target's motion are removed prior to target identification, we cannot expect a reliable target identification performance. In this paper, we use the entropy-based ISAR autofocus technique which consists of two steps: range alignment and phase adjustment. We analyze a relationship between the number of sampling point and a image quality in a range alignment algorithm and also analyze a technique for reducing computation time of the SSA(Stage-by-Stage Approachng) algorithm in a phase adjustment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.2
• /
• pp.17-22
• /
• 2003

The priming discharge characteristic at the reset period in the ADS drive method of PDP was experimentally analyzed in this research. The amount of wall charge accumulated by the discharge and the accumulated time are unrelated to the priming pulse width. The self-erase discharge by excessive wall charge is related to the amount of wall charge by the priming discharge and this is related to space charge generated by the priming discharge. From the experimental result, in the optimized priming condition the plus width is 8$mutextrm{s}$ and the voltage is about 163V. The space charge which helps the self-erase discharge exists during about 16$mutextrm{s}$ immediately after generating the priming discharge. Therefore, it is suitable within 16$mutextrm{s}$ of the priming pluse width for the effective reset process.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.554-560
• /
• 2019

Excore Nuclear Flux Monitoring System in Nuclear Power Plant monitors continuous reactor power up to maximum 200%. The monitoring method, however, has to be different depending on the reactor power level. Because the logarithmic pulse signals must be counted and processed exactly due to large uncertainty if their levels are low, on the other hand, they must be processed through statistical methodolgies if theirs are high to get exact monitoring values, in point of thermal degradation view. Therefore, we developed thermal degradation input signal selection circuit to transfer low level reactor power monitoring circuit to high level reactor power circuit at rated value in this paper. We proved their validities through testing them using real data used in nuclear power plant and analyzed their results. And, These methods will be used to measure the neutron level of excore nuclear flux monitoring system in nuclear power plant.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.4
• /
• pp.386-393
• /
• 2000

This paper presents an improved ZVS partial series resonant DC/DC converter (PSRC) with low conduction losses, suitable for high power and high frequency applications. The proposed PSRC have advantages of zero-voltage-switching (ZVS) of main switches for entire load ranges low conduction losses of main switches by decreasing current stresses. Also the reduction of the effective duty cycle is not occurred during the resonant period of the main circuit because the auxiliary circuit of the proposed converter is placed out of the main power path. The auxiliary circuit is composed with passive components, which are an inductor, two capacitors, two diodes, and a saturable inductor. An improved ZVS PSRC has so much characteristics with respect to the overall system efficiency and to the reduction of current stresses. The operation principles of the proposed converter are explained in detail and the various simulated and experimental results show the validity of the proposed converter.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.575-583
• /
• 2013

In ad hoc networks, a distributed timing synchronization is studied using a firefly-inspired approach. We illuminate the exiting synchronization algorithm based on the theory of pulse-coupled oscillators so that the algorithm can be applied to multi-carrier systems through packet-based communications, where nodes communicate over an orthogonal frequency-division multiple access air interface. As our main result, we introduce a new sync-code detector, which optimally designs both the coupling function and the detection threshold when various network parameters such as the number of nodes in the network and network topology are given a priori. Computer simulations are performed to show the convergence to a synchronized state in realistic network environments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.4
• /
• pp.333-342
• /
• 2009

Three-level Diode Clamped Multilevel Inverter, generally known as Neutral-Point-Clamped (NPC) Inverter, has an inherent problem causing Neutral Point (NP) potential variation. Until now, in many literatures NP potential problem has been investigated and lots of solutions have also been proposed. However, under fault and fault tolerant control, distinctive feature for NP potential variation problem was rarely published from the standpoint of reliability. In this paper, NP potential is analytically investigated both normal and faulty conditions under carrier based PWM. Subsequently, relation between fault detection time and size of capacitor is analyzed. This information is explored by simulation and experiment results, which contribute to enhance the reliability of inverter system.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.2 s.179
• /
• pp.199-206
• /
• 2006

Automatic grease lubricator is equipment that provides adequate amount of fresh grease constantly to the shaft and the bearings of machines. It minimizes the friction heat and reduces the friction loss of machines to the least. This research is to develop automatic grease lubricator by gear driven mechanism with controlled operation time. The ultimate design of this equipment is to lubricate an adequate amount of grease by a simple switch clicking according to the advanced set cycle. The backlash of the gear was minimized to increase the output power. To increase the power of gear mechanism, the binding frequency and the thickness of the coil were changed. To control the rotating cycles of the main shaft according to its set numbers, different resistance and chips were used to design the circuit to controls electrical signals with pulse. The body of the lubricator was analyzed by stress analysis with different constructed angle. The stress analysis for differing loading pressures applied to the exterior body of grease lubricator due to the setup angle, was found that the maximum stress was distributed over the outlet part where the grease lubricator suddenly narrowed contracts. Digital mock-up was analyzed and the rapid prototyping(RP) trial products were tested with PCB circuit and grease. The evaluation of the outlet capacity for RP trial products was conducted, because the friction caused by the outlet on the wall surface was an important factor in the operation of the equipment. Finally, the finishing process was applied to decrease the roughness of the surface to a comparable level and was able to test the performance examination for the product.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.198-198
• /
• 2011

단분산 결정질 실리콘 나노입자 (<10 nm)는 양자점 효과로 인한 선택적 파장 흡수가 가능하므로 태양전지 분야에 응용 가능성이 크다. 특히 입경의 크기가 작아지면 부피대비 표면적이 넓어지기 때문에 태양빛 흡수 면적이 증가한다. 따라서 입자의 크기는 태양전지에서 효율을 결정하는 중요한 요소 중 하나이다. 이러한 이유에서 plasma arc synthesis, laser ablation, pyrolysis 그리고 PECVD (Plasma Enhanced Chemical Vapor Deposition) 등이 실리콘 나노입자를 합성하는데 연구되어 왔으며, 특히 PECVD는 입자 생성과 동시에 균일한 증착이 이루어질 수 있기 때문에 태양전지 제작 시 공정 효율을 높일 수 있다. PECVD를 이용한 나노입자 합성에서 입경을 제어하는데 중요한 전구물질은 Ar과 SiH4가스이다. Ar 가스는 ICP (Inductively Coupled Plasma) 챔버 내부에 가해준 전력을 통해 가속됨으로써 분해되어 Ar plasma가 생성된다. 이는 공급되는 SiH4가스를 분해시켜 핵생성을 유도하고, 그 주위로 성장시킴으로써 실리콘 나노입자가 합성된다. 이때 중요한 변수 중 하나는 핵생성과 입자성장시간의 조절을 통한 입경제어 이다. 또한 공급되는 가스의 유량은 입자가 생성될 때 필요한 화학적 구성비를 결정하므로 입경에 중요한 요소가 된다. 마지막으로 공정압력은 챔버내부의 plasma 구성 요소들의 평균 자유 행로를 결정하여 SiH4가 분해되어 입자가 생성되는 속도와 양을 제어한다. PECVD를 이용한 실리콘 나노입자 형성의 주요 변수는 RF pulse, 가스(Ar, SiH4, H2)의 유량, Plasma power, 공정압력 등이 있다. 본 연구에서는 RF (Radio Frequency) PECVD방법을 이용하여 실리콘 나노입자를 만드는데 필요한 여러 변수들을 제어함으로써 이에 따른 입경분포 차이를 연구하였다. 또한 SEM (Scanning Electron Microscopy)과 SMPS (Scanning Mobility Particle Sizer)를 이용하여 각 변수에 따라 생성된 나노입자의 입경과 농도를 분석하였다. 이 중 plasma power에 따른 입경분포 측정 결과 600W에서 합성된 실리콘 나노입자가 상당히 단분산 된 형태로 나타남을 확인할 수 있었고 향후 다른 변수의 제어, 특히 DC bias 전압과 열을 가함으로써 나노입자의 결정성을 확인하는 추가 연구를 통해 태양전지 제작에 응용 할 수 있을 것으로 예상된다.