• The Transactions of the Korea Information Processing Society
• /
• v.4 no.10
• /
• pp.2544-2552
• /
• 1997

This paper presents three multiprocess models for parallel protocol implementation, that is, (1)channel communication model, (2)fork-join model, and (3)event polling model. For the specification of parallelism for each model, a parallel programming language, Par. C System, is used. to measure the performance of multiprocess models, we implemented the Internet Protocol Suite(IPS) Internet Protocol (IP) for each model by writing the parallel language on the Transputer. After decomposing the IP functions into two parts, that is, the sending side and the receiving side, the parallelism in both sides is exploited in the form of Multiple Instruction Single Data (MISD). Three models are evaluated and compared on the basis of various run-time overheads, such as an event sending via channels in the parallel channel communication model, process creating in the fork-join model and context switching in the event polling model, at the sending side and the receiving side. The event polling model has lower processing delays as about 77% and 9% in comparison with the channel communication model and the fork-join model at the sending side, respectively. At the receiving side, the fork-join model has lower processing delays as about 55% and 107% in comparison with the channel communication model and the event polling model, respectively.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.9
• /
• pp.465-474
• /
• 2005

For high density SoC design, on-chip communication based on bus interconnection encounters bandwidth limitation while an NoC(Network-on-Chip) approach suffers from unacceptable complexity in its Implementation. This paper introduces a new on-chip communication protocol, SNP (SoC Network Protocol) to overcome these problems. In SNP, conventional on-chip bus signals are categorized into three groups, control, address, and data and only one set of wires is used to transmit all three groups of signals, resulting in the dramatic decrease of the number of wires. SNP efficiently supports master-master communication as well as master-slave communication with symmetric channels. A sequencing rule of signal groups is defined as a part of SNP specification and a phase-restoration feature is proposed to avoid redundant signals transmitted repeatedly over back-to-back transactions. Simulation results show that SNP provides about the same bandwidth with only $54\%$ of wires when compared with AMBA AHB.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.1
• /
• pp.95-105
• /
• 1995

An appendix to the MAP 3.0 specification notes that there are primary advantages to use of fiber optics : noise immunity, ability to run in difficult electrical environments, safety and high data rates. All of these may be quite useful in various manufacturing environments. In this paper, we study on construction schmes for a fiber-based 802.4 MAP system including the use of both bus and star topologies. We suggest passive star network and FDDI network for manufacturing environment. And then, we propose the FDDI protocol including the use a dual ring topology running at 100 Mbps to physical and datalink layer of MAT specification and analysis it's protocol and topology for abilities in manufacturing environments, We evaluate about applications service, time-critical processing and topology of two models in manufacturing environment.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.5
• /
• pp.721-728
• /
• 2004

OCSP (Online Certificate Status Protocol) server which checks the certificate status provides the real time status verification in the PKI (Public Key Infrastructure) system which is the essential system of certificate. However, OCSP server need the message authentication with the server and client, so it has some shortcomings that has slow response time for the demands of many clients concurrently and has complexity of the mathematical process in the public encryption system. In this research, simulation model of the certificate status vertification server is constructed of the DEVS (Discrete EVent system Specification) formalism. This sever model is constructed to practice the authentication with hash function when certificate is checked. Simulation results shows the results of increase of the certificate status verification speed and decrease of the response time to the client.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.12
• /
• pp.965-974
• /
• 2003

Today's network consists of a large number of routers and servers running a variety of applications. In this paper, we have designed and constructed the general simulation environment of network security model composed of multiple IDSs agent and a firewall agent which coordinate by CNP (Contract Net Protocol). The CNP, the methodology for efficient integration of computer systems on heterogeneous environment such as distributed systems, is essentially a collection of agents, which cooperate to resolve a problem. Command console in the CNP is a manager who controls the execution of agents or a contractee, who performs intrusion detection. In the knowledge-based network security model, each model of simulation environment is hierarchically designed by DEVS (Discrete Event system Specification) formalism. The purpose of this simulation is the application of rete pattern-matching algorithm speeding up the inference cycle phases of the intrusion detection expert system. we evaluate the characteristics and performance of CNP architecture with rete pattern-matching algorithm.

• Journal of the Korea Convergence Society
• /
• v.8 no.3
• /
• pp.23-30
• /
• 2017

OpenADR is a national standard communication protocol of demand response service. OpenADR uses XML message, called a payload, to support logical transaction of demand response service. For this purpose, OpenADR defines a XML element as transaction identifier which is called requestID. Unfortunately, OpenADR 2.0b profile specification describes some information about requestID but, it is not enough for understanding properly. Ambiguous definition of payload transaction makes vulnerabilities of implementing VEN & VTN and confuses mapping OpenADR 2.0b protocol into other smart grid protocols. Therefore, this paper redefines payload transaction to solve an ambiguous information of OpenADR 2.0b profile specification, proposes a model of analyzing payload transaction, and shows how to detect a payload transaction vulnerability in real-world.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.135-145
• /
• 2000

Manufacturing Message Specification (MMS) is designed as a communication standard protocol, ISO/IEC 9506, on factory automation for messaging between heterogeneous programmable unit controller, PLC, NC, Robot, of different vendors on the networks. MMS is also a standard protocol of OSI reference model application layer, In this paper, we show an implementation of MMS over TCP/IP using ANSI-C programming language on the unix environment, and make java classification using java native interface (NJI) with MMS library. The use of java classification provides a basic environment ot overcome a difficult programming with different MMS application programming interface (MMS-I) which requires a siklled programming technique of graphic user interface (GUI). In this paper, we implement a MMS application program of the automated assembly model for printed circuit board based on WWW which shows the operation, control and monitoring of real manufacturing device (RMD) with web browser providing users for consistent user interface.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1064-1073
• /
• 2002

In this paper, we design and implement the Wireless Transaction Protocol (WTP) proposed by the Wireless Application Protocol (WAP) forum using a protocol development tool, SDL Development Tool (SDT). And we conduct a comparative performance evaluation of the WTP implementation with other three implementations that are based on different implementation models respectively: the server model, the coroutine model, and the activity-thread model. To implement WTP, we first use Unified Modeling Language (UML) for analyzing the protocol requirement and defining the protocol engine architecture. Next, we use Software Development Language (SDL) to design the protocol engine in details and then generate the WTP implementation automatically with the aid of SDT The code size of the WTP implementation generated by SDT is 62% larger than the other three implementations. However, its throughput and system response time for transaction processing is almost equal to the other three implementations when the number of concurrent clients is less than 3,000. If more than 5,000 concurrent clients tries, the transaction success rate abruptly decreases to 10% and system response time increases to 1,500㎳, due to the increased protocol processing time. But, it comes from the fact that the load overwhelms the capacity of the PC resource used in this experimentation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.6
• /
• pp.546-552
• /
• 2010

As the demands for the safety and convenience applications of the vehicles increase, the data load for the In-vehicle Network has increased significantly. As a result, a deterministic and fault-tolerant communication system is required to implement the safety critical applications such as X-by-wire systems. FlexRay communication system is a new standard of network communication system which provides the high speed serial communication, time triggered bus and fault tolerant communication between electronic devices. In addition to time-triggered communication, as providing of the event-triggered communication such as CAN, FlexRay protocol is able to manage the restricted communication resource more effectively. This paper presents the development of FlexRay driver which will be applied to the future ECU's communication system. To develop the FlexRay driver, the FlexRay requirement specification and FlexRay specification is analyzed. The developed FlexRay driver is implemented by using MPC5567 microprocessor of the Freescale semiconductor. To verify the developed FlexRay driver, the waveform of the FlexRay driver was measured and compared with the CAN communication system. As a result, the bus load is reduced about 13% compared with the CAN communication system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.927-930
• /
• 2007

As RFID systems are applied to various fields and applications such as supply chain management, asset management, location based applications etc. the requirements becomes diverse. For example, Much higher performance, TCP/IP protocol stack are required in some applications. However, low end processors based systems such as 8051 processor can not meet such requirements due to their low processing capacity and limited size of memory. In this paper a UHF band RFID system which meets the ISO 18000-6 TYPE C specification with ARM920T-based processor is implemented and tested.