• 분석과학
• /
• 제7권1호
• /
• pp.115-124
• /
• 1994

탈지과정을 거친 냉연 강판을 순수로 세정하는 과정에서 발생하는 rust와 이러한 rust 발생을 방지하기 위하여 0.05%(wt) $Na_5P_3O_{10}$ 용액으로 표면처리한 냉연 강판의 표면은 X-ray Photoelectron Spectroscopy(XPS) 방법으로 비교 분석하였다. Rust가 발생한 냉연 강판의 표면은 $Fe_2O_3$ 및 FeO, 그리고 $Fe(OH)_3$등으로 구성되는 산화층이 $1500{\AA}$정도의 두께로 존재함을 알 수 있었고, 한편 $Na_5P_3O_{10}$ 용액으로 표면처리한 냉연 강판의 표면은 $60{\AA}$정도의 인산염 피막이 얇은 Fe 산화층 위에 존재함으로써 보호 피막의 역할을 한다는 것을 알 수 있었다.

• 상하수도학회지
• /
• 제19권1호
• /
• pp.68-77
• /
• 2005

This study was performed to evaluate the application of corrosion inhibitor and to examine the correlation between corrosion rate and red water in a series of batch tests and a test using auto corrosion monitoring system at A water treatment plant in Gyeonggido. The corrosion study in the auto corrosion monitoring system indicated that Fe concentration decreased by 30~50% and corrosion rate also reduced remarkably with corrosion inhibitor at $1.8mg\;PO_4/L$. After addition of corrosion inhibitor, it was indicated the effective adsorption of the inhibitor on the surface of the pipe line forming a protective film. The corrosion rate increases with the increase in Fe concentration. With $1.8mg\;PO_4/L$ of corrosion inhibitor, the corrosion rate decreased remarkably. Fe concentration had correlation to not only red water problems but also the corrosion rate that actually dissolved into the water, primarily due to the deposition of oxidized iron or other compounds as a scale, which serves as a large reservoir of corrosion by-product. Therefore, corrosion rate can be estimated by Fe concentration. For these reasons, an effective corrosion inhibitor is also an effective red water control reagent. The effect of the corrosion inhibition can last for some time even the application the corrosion inhibitor is discontinued. For the cost effective and efficient corrosion control, the concentration and timing of corrosion inhibitor addition must be determined properly.

• 한국진공학회지
• /
• 제16권3호
• /
• pp.181-186
• /
• 2007

본 연구에서는 플라즈마 디스플레이 패널의 방전 특성과 MgO 보호막 물성에 영향을 미치는 MgO 증착률에 대해 분석을 하였다. 물성 특성으로 결정 방향과 표면 거칠기 결정 구조 및 음극선 발광을 XRD (X-ray Diffraction), AFM (Atomic Force Microscopy), Mono-CL (Mono Cathode Luminescence analysis)등을 이용하여 측정하였고, 방전 특성으로는 방전개시전압과 방전 전류, 휘도를 진공 챔버와 오실로스코프 (TDS 540C), 전류 프로브 (TCP 312A), 휘도 색차계 (CS-100A)를 이용하여 측정하였다. 실험 결과 $5{\AA}/sec$의 증착률이 최적의 증착률임을 확인하였고, 또한 MgO의 증착률에 따라서 MgO 보호막의 물성특성이 변화하고 이에 의해서 전기적 광학적 특징이 영향을 받는 것을 확인하였다. 즉, 증착률 $5{\AA}/sec$을 기준으로 증착률이 증가할수록 (200) 결정 방향 및 음극선 발광의 밀도가 감소되고, 동작 전압은 증가하며 점차 효율이 나빠지는 경향을 보인다.

• 한국재료학회지
• /
• 제28권6호
• /
• pp.361-364
• /
• 2018

Binary Ti-Al alloys below 51.0 mass%Al content exhibit a breakaway, transferring from parabolic to linear rate law. The second $Al_2O_3$ layer might have some protectiveness before breakaway. Ti-63.1 mass%Al oxidized at 1173 K under parabolic law. Breakaway oxidation is observed in every alloy, except for Ti-63.1 mass%Al. After breakaway, oxidation rates of the binary TiAl alloys below 34.5 mass%Al obey almost linear kinetics. The corrosion rate of Ti-63.1 mass%Al appears to be almost parabolic. As content greater than 63.0 mass% is found to be necessary to form a protective alumina film. Addition of Mo improves the oxidation resistance dramatically. No breakaway is observed at 1123 K, and breakaway is delayed by Mo addition at 1173 K. At 1123 K, no breakaway, but a parabolic increase in mass gain, are observed in the Mo-added TiAl alloys. The binary Ti-34.5 mass%Al exhibits a transfer from parabolic to linear kinetics. At 1173 K, the binary alloys show vary fast linear oxidation and even the Mo-added alloys exhibit breakaway oxidation. The 2.0 mass%Mo-added TiAl exhibits a slope between linear and parabolic. At values of 4.0 and 6.0 mass% added TiAl alloys, slightly larger rates are observed than those for the parabolic rate law, even after breakaway. On those alloys, the second $Al_2O_3$ layer appears to be persistently continuous. Oxidation resistance is considerably degraded by the addition of Mn. Mn appears to have the effect of breaking the continuity of the second $Al_2O_3$ layer.

• 한국재료학회지
• /
• 제15권3호
• /
• pp.155-160
• /
• 2005

The electrolytic reduction of spent oxide fuel involves the liberation of oxygen in a molten LiCl electrolyte, which results in a chemically aggressive environment that is very corrosive fir typical structural materials. So, it is essential to choose the optimum material f3r the process equipment handling molten salt. In this study, the corrosion behavior of Al-Y coated Haynes 263 in a molten salt of $LiCl-Li_2O$ under oxidation atmosphere was investigated at $650^{\circ}C$ for $72\~168$ hours. The corrosion rate of Al-Y coated Haynes 263 was low while that of bare Haynes 263 was high in a molten salt of $LiCl-Li_2O$. Al-Y coated Haynes 263 improved the corrosion resistance better than bare Haynes 263 alloy. An Al oxide layer acts as a protective film which Prohibits Penetration of oxygen. Corrosion Products were formed $Li(Ni,Co)O_2$ and $LiTiO_2$ on bare Haynes 263, but $LiAlO_2,\;Li_5Fe_5O_8\;and\;LiTiO_2$ on Al-Y coated Haynes 263.

• 대한간호학회지
• /
• 제41권6호
• /
• pp.814-820
• /
• 2011

Purpose: This study was performed to compare the effects of standardized peristomal skin care (SPSC) and crusting technique (CT) on the peristomal skin of ostomates. SPSC was developed by a consensus among the expert group based on a comprehensive review of the relevant literature and hospital protocols. Methods: A randomized controlled pilot trial with 2 parallel arms was used. A total of 81 ostomates, who were recruited from a tertiary hospital, completed the baseline, 1-month, 2-month, and 3-month follow-up (SPSC group, n=45; CT group, n=36). SPSC consisted of water cleansing and direct application of ostomy appliances. CT involved crusting hydrocolloid powder and patting with water sponge or protective barrier liquid film. The outcomes of the study were assessed by skin problems, such as discoloration, erosion and tissue overgrowth; the domains of the evaluation tool used in examining the peristomal skin. A generalized estimating equation model was used to examine the effects according to time and group. Results: In both SPSC and CT groups, the likelihood of occurrence of discoloration (OR, 1.99; 95% CI, 1.61-2.46), erosion (OR, 1.87; 95% CI, 1.55-2.25) and tissue enlargement (OR, 1.94; 95% CI, 1.36-2.77) increased with time. There was no significant difference in discoloration between the groups, whereas the probability of erosion (OR, 0.38; 95% CI, 0.16-0.89) and tissue overgrowth (OR, 0.09; 95% CI, 0.02-0.55) was lower in the SPSC group than in CT group. Conclusion: SPSC was sufficient in preventing peristomal skin problems of ostomates compared to the CT.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• 제24권2호
• /
• pp.65-70
• /
• 2013

Many child actors have appeared in various movies as the Korean film industry continues to evolve. As more children appear in violent and raunchy scenes, there are more concerns about the movie's effect on child actors. In some Western countries, many strategies have been developed for child actors, but for the Korean movie industry, the conditions are still poor for them. Although children who enter the concrete operational period are able to think logically and systematically, they are yet limited by their experiences. Adolescents in the formal operational period try to deal with all of the possibilities and assumptions logically and systematically with freedom from realistic contents and experiences. This period is very important because adolescents become more sensitive to others' feelings and they should develop their ego identity. Several studies have reported the indirect experiences through media including how the movie affected children and adolescents negatively. Depending on the individual's morality, judgment and emotional status, these effects were variable and inconsistent and could be relieved by several interventions. We could anticipate much bigger emotional effect on child actors who are acting directly and then are confronting themselves in the scene. Therefore, we suggest that the emotional effects of the movies on child actors can be managed properly by considering children's cognitive ability and emotional status, and establishing protective strategies before they are exposed to problematic scenes. Of course, it should be followed by evaluating them after the exposure and with follow-up management, if necessary.

• 해양환경안전학회지
• /
• 제22권1호
• /
• pp.138-144
• /
• 2016

티타늄은 표면에 형성되는 보호성 부동태 피막 때문에 일반부식과 해수에서 내식성이 강하지만 염산, 황산, 인산 등의 산에서는 보호성 산화물 피막이 파괴된다고 알려져 있다. 본 연구에서는 Ti에 Al 및 V등을 첨가한 ${\alpha}+{\beta}$계에 대하여 $1066^{\circ}C$와 $966^{\circ}C$에서 5시간 용체화 열처리를 실시하고, 이 시편을 $550^{\circ}C$, $600^{\circ}C$, 및 $650^{\circ}C$에서 각각 1시간, 4시간, 8시간 및 16시간 시효열처리한 후 마이크로비커스 경도를 측정하고, 이 시편을 1N $H_2SO_4$ 용액에서 전기화학적 분극법으로 부식을 계측하였으며, 분극을 마친 시편의 표면을 현미경 조직사진으로 부식상태를 검토하였다. 시험 결과 용체화열처리한 시편이 모재와 시효열처리한 시편보다 높은 내식성을 나타내며. 용체화 온도가 높고 시간이 길어질수록 내식성은 증가하였다.

• 공업화학
• /
• 제9권4호
• /
• pp.463-468
• /
• 1998

알루미늄의 부식에 있어서 HCI 용액내에 황산을 첨가하는 경우 황산이온의 화학적 흡착에 의한 부식억제 효과가 나타나며, CV (cyclic voltammetry) 실험결과 황산이온은 핏트내부에 보호성 산화피막을 생성함으로서 에치핏트가 핏트내부와 알루미늄 표면에 함께 생성되어 핏트의 밀도가 증가하였다. 알루미늄 교류에칭시에 핏트분포는 황산이온의 농도와 환원전류량에 의하여 크게 영향을 받으며, 환원전류인가시 $0.8mC/cm^2$ 이하의 전하량에서 핏트내부에 생성된 산화피막은 황산이온 농도의 증가에 따라 핏트발생에 대한 저항성이 중가하였으나, $0.8mC/cm^2$ 이상에서는 산화피막내에 국부적인 구조변화가 발생하며 황산이온 농도에 관계없이 산화피막의 파괴가 빠르게 진행되었다.

• Corrosion Science and Technology
• /
• 제11권6호
• /
• pp.280-285
• /
• 2012

Aluminum is on active metal, but it is well known that its oxide film plays a role as protective barrier which is comparatively stable in air and neutral aqueous solution. Thus, aluminum alloys have been widely applied in architectural trim, cold & hot-water storage vessels and piping etc., furthermore, the aluminum alloy of AC8A have been widely used in mold casting material of engine piston because of its properties of temperature and wear resistance. In recent years, the oil price is getting higher and higher, thus the using of low quality oil has been significantly increased in engines of ship and vehicle. Therefore it is considered that evaluation of corrosion resistance as well as wear resistance of AC8A material is also important to improve its property and prolong its lifetime. In this study, the effect of solution and tempering heat treatment to corrosion and wear resistance is investigated with electrochemical method and measurement of hardness. The hardness decreased with solution heat treatment compared to mold casting condition, but its value increased with tempering heat treatment and exhibited the highest value of hardness with tempering heat treatment temperature at $190^{\circ}C$ for 24hrs. Furthermore, corrosion resistance increased with decreasing of the hardness, and decreased with increasing of the hardness reversely. As a result, it is suggested that the optimum heat treatment to improve both corrosion and wear resistance is tempering heat treatment temperature at $190^{\circ}C$ for 16hrs.