• 정보처리학회논문지C
• /
• 제10C권2호
• /
• pp.155-162
• /
• 2003

빠른 복구 시간과 함께 서비스의 보장은 망의 신뢰성을 보장하는데 있어서 주요한 목표이다. 보호 스위칭 방식에 의하여 특정 서비스를 요구하는 세션의 서비스 품질을 보장하는 한 가지 방법은 작업 경로를 설정할 때 작업 경로의 대역을 보장하는 복구 경로를 함께 설정하는 것이다. 작업 경로의 대역을 보장할 수 있는 복구 경로를 설정할 때 다른 작업 경로에 대한 복구 경로의 대역을 서로 공유하면 대역의 소비를 감소시킬 수 있다. 본 논문에서는 보호 스위칭에 의한 복구 경로 설정에 있어서 작업 경로상에 최대로 할당된 링크의 대역을 기반으로 복구 경로의 공유 대역을 결정하는 방안을 설명한다. 그리고 이러한 단순 공유 방안의 문제점과 원인을 지적하고 이것을 실제망에 적용했을 때의 결과를 시뮬레이션을 통해서 보여준다. 그리고 이러한 문제점을 해결하기 위한 방안으로 링크 데이터베이스를 통한 완전 공유를 구현할 수 있는 방안을 제시하고 그 결과를 보여준다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.746-748
• /
• 1993

To overcome the problem of the diode reverse recovery in high switching frequency inverter, a new gate drive scheme is proposed for IGBT in this paper. Using this circuit, the reverse recovery current can be controlled and faster switching time can be achieved for hard switching inverter. The over-current protection method, which is suitable for the proposed gate driver, is also presented. The operation of the proposed circuit is investigated and its usefulness is verified through the experimental results.

• 산업기술연구
• /
• 제13권
• /
• pp.89-96
• /
• 1993

In this paper, an OPS(Optical Protection Socket) unit is designed and prototyped for the application in the optical CPN(Customer Premises Network). The OPS unit, which plays an important role in the CPN for the enhanced network reliability, is consisted of $1{\times}2$ optical fiber splitter, combiner, and $1{\times}1$ optical switch to be a hybrid-typed unit. Various considerations, about power burget and optical information loss have given the most practical design for OPS. From the measurement of the realized OPS unit, it has proved such as the pertinent switching delay time with minimum data loss, the perceptive ability on the ONU degradation, the switching ability on the ONU malfunction.

• ETRI Journal
• /
• 제24권4호
• /
• pp.311-322
• /
• 2002

Presently, optical burst switching (OBS) technology is under study as a promising solution for the backbone of the optical Internet in the near future because OBS eliminates the optical buffer problem at the switching node with the help of no optical/electro/optical conversion and guarantees class of service without any buffering. To implement the OBS network, there are a lot of challenging issues to be solved. The edge router, burst offset time management, and burst assembly mechanism are critical issues. In addition, the core router needs data burst and control header packet scheduling, a protection and restoration mechanism, and a contention resolution scheme. In this paper, we focus on the burst assembly mechanism. We present a novel data burst generation algorithm that uses hysteresis characteristics in the queueing model for the ingress edge node in optical burst switching networks. Simulation with Poisson and self-similar traffic models shows that this algorithm adaptively changes the data burst size according to the offered load and offers high average data burst utilization with a lower timer operation. It also reduces the possibility of a continuous blocking problem in the bandwidth reservation request, limits the maximum queueing delay, and minimizes the required burst size by lifting up data burst utilization for bursty input IP traffic.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1675-1677
• /
• 1998

It is currently increasing to use surge protection devices in the protection of various electronic circuits from the transient overvoltages such as lightning strikes and switching surges. For this reason, the simulation methods, which can easily predict the protection performance of the devices, are strongly required in order to design the adequate surge protection circuits in lightning surge cut-off performance and economic aspects. This paper deals with ZnO varistor modeling method for designing a surge protection circuit and suggests the Pspice simulation model which takes the characteristic of varying clamping voltage into consideration during the time-to-crest, in range of $8{\sim}30{\mu}s$, of surge current applied to a ZnO varistor. The ZnO varistor Pspice simulation data introduced in this paper has produced almost same values as the measured results experimentally.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권1호
• /
• pp.47-54
• /
• 2004

A new high voltage DC power supply is proposed. The proposed power supply is constructed with several power converters connected in series. It is easy to obtain high DC voltage for the same structure of each power converter. The output DC power of the proposed power supply can be disconnected from the load within several hundred microseconds at the instant of a load short-circuit fault. The rising time of the output DC voltage is also as small as several hundred microseconds, and there is no overshoot of the voltage because all of the output filter capacitors keep undischarged state even in load short-circuit condition. Therefore, the proposed scheme is suitable for the protection of frequent output short-circuit and fast on/off switching of output DC voltage. The proposed power supply has improved features such as simple structure, high power factor, and reduced size and volume compared with the conventional schemes. The operating principle is described and the validity of the proposed scheme is proved through simulations and experiments.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.47-52
• /
• 2016

This paper describes the design and fabrication of high frequency ground impedance measuring system for assessment of grounding system for Lightning protection. The ground impedance measuring system has been designed and fabricated which makes it possible to assess the ground impedance by frequency ranges from 100 Hz to 1 MHz. The effective grounding systems having a very low impedance to electromagnetic disturbance such as lightning surges and noises in microelectronics and high-technology branches are strongly required. In order to analyze the dynamic characteristic of grounding system impedances in lightning and surge protection grounding systems, it is highly desirable to assess the ground impedances as a measure of performance of grounding system in which lightning and switching surge currents with fast rise time and high frequency flow. The measuring system is based on the variable frequency power supply and consists of signal circuit part, main control part, data acquisition and processing unit, and voltage and current probe system. The ground impedance measuring system can be used to assess grounding system during occurrence of lightning.

• 한국산업정보학회논문지
• /
• 제27권5호
• /
• pp.25-36
• /
• 2022

본 논문은 단일 반송파 변조를 위한 공간 주파수 블록 코드에서의 랜덤 부호 반전 기술을 제안한다. 종래의 시공간 그리고 공간 주파수 블록 코드는 전파 환경이 공개되어 있으므로 심각한 전파 탈취 문제를 극복해야 한다. 이러한 전파 공개 문제를 피하기 위해, 시공간 블록 코드를 위한 랜덤 코드 데이터 보호 방법이 제안되어 있지만, 이 알고리즘은 직교 주파수 분할 다중화 블록별로 채널 결합을 바꿀 수 있는데, 이와 같은 종류의 느린 스위칭은 근처의 수신기들이 전송된 데이터를 검출할 확률을 증가시킨다. 이 논문은 데이터 심볼 기반의 빠른 스위칭 알고리즘 즉, 단일 반송파 변조를 위한 공간 주파수 블록 코드에서의 랜덤 부호 반전 기술을 제안한다. 모의실험 결과는 제안하는 알고리즘이 랜덤 부호 반전 타이밍 시퀀스를 모르는 수신기의 성능과 비교하여 우수한 성능을 보유하고 있다는 것을 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제25권5호
• /
• pp.340-344
• /
• 2012

Protected Circuit Module protects battery from over-charge and over-discharge, also prevents accidental explosion. Therefore, power MOSFET is essential to operate as a switch within the module. To reduce power loss of MOSFET, the on state voltage drop should be lowered and the switching time should be shorted. However there is trade-off between the breakdown voltage and the on state voltage drop. The TDMOS can reduce the on state voltage drop. In this paper, effect of design parameter variation on electrical properties of TDMOS, were analyzed by computer simulation. According to the analyzed results, the optimization was performed to get 65% higher breakdown voltage and 17.4% on resistance enhancement.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1535-1544
• /
• 2017

Advances in FPGA technology have enabled fast real-time simulation of power converters, filters and loads. FPGA based HIL (Hardware-In-the-Loop) simulators have revolutionized control hardware and software development for power electronics. Common time step sizes in the order of 100ns are sufficient for simulating switching frequency current and voltage ripples. In order to keep the time step as small as possible, ideal switching function models are often used to simulate the phase legs. This often produces inferior results when simulating the discontinuous conduction mode (DCM) and disabled operational states. Therefore, the corresponding measurement and protection units cannot be tested properly. This paper describes a new solution for this problem utilizing a discrete-time PI controller. The PI controller simulates the proper DC and low frequency AC components of the phase leg voltage during disabled operation. It also retains the advantage of fast real-time execution of switch-based models when an accurate simulation of high frequency junction capacitor oscillations is not necessary.