• Journal of Industrial Technology
• /
• v.15
• /
• pp.113-122
• /
• 1995

By integrating WDM to OPS unit which plays an important role for the reliability of CPN, we made it possible to provide CATV, VOD, and high-speed data services simultaneously and to meet the requirements for new services in the future. For the design of optimal system, the link analysis of power budget has been performed. Also, the prototyped system has been tested with STM-1 level signals to confirm functions such as transmission, distribution, and protection. The results proved that when occurred out-of-order or recovery of ONU, the system did the pertinent switching with minimum loss for high-speed data services. Also for video distribution services, the system has distributed STM-1 level signals successfully.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.381-383
• /
• 2000

최근 인터넷의 트래픽이 다양해지고, 서비스 질 보장에 대한 사용자의 요구가 증가하며, 가상 사설망(VPN, Virtual Private Network)이나 트래픽 엔지니어링 등 향상된 IP 서비스가 요구되고 있다. 이러한 요구 사항을 충족시켜주기 위하여 IETF에서는 MPLS (Multiprotocol Label Switching) 기술을 표준화하고 있다. 다양한 서비스와 QoS 보장을 가능하게 하는 MPLS 망에서 신뢰성(Reliable) 보장은 또 하나의 중요한 문제이다. 본 논문에서는 이러한 MPLS 망의 신뢰성을 보장하기 위한 기존의 방법들을 설명하고 기존 방법의 문제를 해결하기 위해 선택적인 보호 연결(Protection Path) 설정방법을 제안한다. 본 논문에서 제안하는 보호 연결 설정방법은 과거의 특정 장애 정보를 이용하여 선택적으로 보호 연결을 미리 설정함으로써 빠른 연결 복구를 수행하게 하고 보호 연결 설정으로 인한 자원의 낭비를 최소화 하고자 하는 방법이다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.3
• /
• pp.18-27
• /
• 1996

By integrating WDM to OPS unit which plays an improtant role for the reliability of CPN, we made it possible to provide CATV, VOD, and high-speed data services simultaneously and to meet easily the requirements for new services in the future. For the design of optimal system, the link analysis of power budget has been perfomred. Also, the prototyped system has been tested with STM-1 level signals to confirm functions such as transmission, distribution, and protection. The results proved that when occurred out-of-order or recovery of ONU, the system did the pertinent switching with minimum loss for high-speed data services. Also for video distribution services, the system has distributed STM-1 level signals sucessfully.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3130-3132
• /
• 2000

The Cathodic Protection system which is usually applied to marine metallic structures in domestic is Sacrificial Anode Method. In general, low efficiency rectifiers are using in the field of Cathodic Protection. These rectifiers are not only low efficiency but also manual type which is not able to control remotely. In this paper we describe the high efficiency rectifier used the high speed switching method for optimum corrosion control of marine metallic structures.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.11
• /
• pp.2043-2048
• /
• 2011

High speed drive method for a fuel injector cleaner with current control is presented in this paper. The fuel injector cleaner is used for cleaning the fuel injectors in vehicles when it is clogged with deposit and rust. The fuel injector cleaner cleans the fuel injector by turning on and off the fuel injector rapidly. When the fuel injectors are cleaned, the switching speed is very important. However, when the fuel injector is turned off, the residual current in the fuel injector coil slows down the return action of the plunger in the fuel injector deteriorating performance and speed of the fuel injector cleaner. In this paper, fast turn off operation method of fuel injectors is developed for more effective cleaning. The simulation and experiment results show the validity of the proposed method.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1697-1708
• /
• 2017

This paper proposes an algorithm for the differential protection of an Indirect Symmetrical Phase Shift Transformer (ISPST) by considering the different behaviors of the compensated differential current under internal fault and magnetizing inrush conditions. In this algorithm, a criterion function is defined which is based on the difference of amplitude of the wavelet transformation over a specific frequency band. The function has been used for the discrimination between three phase magnetizing inrush and internal fault condition and requires less than a quarter cycle after disturbance. This method is independent of any coefficient or threshold values of wavelet transformation. The merit of this algorithm is demonstrated by the simulation of different faults in series and excitation unit and magnetizing inrush with varying switching conditions on ISPST using PSCAD/EMTDC. Due to unavailability of in-field large interconnected transformers for such a large number of destructive tests, the results are further verified by Real Time Digital Simulator (RSCAD/RTDS). The proposed algorithm has been compared with the conventional harmonic restraint based method that justifies the application of wavelet transform for differential protection of ISPST. The proposed algorithm has also been verified for different rating of ISPSTs and satisfactory results were obtained.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.7
• /
• pp.89-94
• /
• 2013

This paper presents a method of simulating the protection effects of surge protective devices(SPDs) depending on the protective distance and types of input impedance of load to be protected. In order to analyze the protective performances of voltage-limiting type SPDs associated with the reflection and oscillation phenomena, the terminal voltage across load being protected and the residual voltage of SPDs were simulated by using EMTP model as functions of the protective distance and types of input impedance of loads. As a consequence, SPDs should be installed by taking into account the protective distance and input impedance of loads to achieve reliable protection of electrical and electronic equipment from lightning and switching surges. It is expected that the simulation method proposed in this paper could be practically used in design for installing SPDs in low-voltage distribution systems.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.1
• /
• pp.51-56
• /
• 1999

This paper presents a new transient overvoltage blocking device (TOBD) for info-communication facilities with low power and high frequency bandwidth. Conventional protection devices have some problems such as low frequency bandwidth, low energy capacity and high remnant voltage. In order to improve these limitations, thehybrid type TOBD, which consists of a gas tube, avalanche diodes and junction typefield effect transistors (JFETs), was designed and fabricated. The TOBD differs from the conventional protection devices in configuration, and JFETs were used as an active non-linear element and a high speed switching diode with low capacitance limits high current. Therefore the avalanche dilde with low energy capacity are protected fromthe high current, and the TOBD has a very small input capacitance. From the performance test using combination surge generator, which can produce $1.2/50\mus\;4.2kV_{max}\; 8/20\mus\; 2.1kA_{max}$, it is confirmed that proposed TOBD has an excellent protection performance in tight clamping voltage and limiting current characteristics.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.277-280
• /
• 2005

This paper dealt with the development of a surge protection device (SPD) that can protect high speed computer network devices from overvoltages caused by switching operations or lightning surges. The designed SPD is a form of hybrid circuit which is composed of a gas tube having large current diverting capability, high response bi-directional avalanche diodes, and fast recovery diodes to reduce insertion loss on high frequency domain. Surge protection and signal transmission characteristics of the fabricated SPD was tested according to the international standards, IEC 61000-4-5 and IEC 61643-21. From the test results, the SPD is satisfied with the international standards and the high cut-off frequency was 204MHz. Also, the SPD showed a good performance without an insertion loss on a field test of 100Mbps class Local Area Network

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.9
• /
• pp.46-53
• /
• 2007

The link-fault recovery in the normal Ethernet bridged networks has relied on the Spanning Tree Protocol(STP) or Rapid STP. However, STP can not offer fast error recovery which is needed real-time services such as aircraft. In this paper, we compare automatic protection switching(APS) providing fault-tolerant function in the BcN back bone system with Avionic Full Duplex Switched Ethernet(AFDX) which is recently equipped in the A380 for Airbone Databuses. Also, we propose a link-bypass scheme for improving fault-tolerant performance of the AFDX by connecting switches and bypass fault section when a fault is originated on the link. For comparing and verifying the performance of proposed scheme, we simulated Ethernet, AFDX, APS and proposed AFDX with link-bypass scheme using NS-2. The proposed AFDX with link-bypass scheme can be applied to aircrafts, BcN backbone networks and industrial automatic networks.