• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.5
• /
• pp.318-324
• /
• 2000

Field experiment was conducted on a sandy clay loam paddy field in the Experimental Farm of the Kangwon National University for four years from 1995 to 1998 to evaluate the effect of different nitrogen fertilizers on soil property and rice yield. The size of each experimental plot was 75 m2. Basal application of fertilizer to the paddy field was on late April, and rice (cv. Odae) was sown with drill seeding on early May. Irrigation was done at 3 leaf stages after rice seeding. Electrical conductivity in soils treated with phosphate- and resin coated slow release fertilizers were relatively greater than those of the other fertilizer application. Available $P_2O_5$ concentration in soils after rice harvest increased significantly compared that in soil before field trial. Rice yield in transplanting culture were $6.516kg\;ha^{-1}$. The rice yield in the direct seeded paddy was 81.9 percents of the yield in the transplanted paddy. The rice yield in phosphate coated slow release fertilizer was the highest among various fertilizer trials in directly seeded dry paddy, while rice yield was the lowest in the organic fertilizer plus urea application. Rice yield between organic fertilizer plus urea and organic fertilizer application were not significantly different. The green manuring effect of rye in the direct seeded rice paddy in Chuncheon was low due to low temperature and short growth period.

• Journal of the Korean Society of Radiology
• /
• v.4 no.1
• /
• pp.5-9
• /
• 2010

In recent, a digital x-ray detector attracted worldwide attention and there are many studies to commercialize. There are two methods in digital x-ray detector. This method is an Indirect method and Direct method. This study is to see the differences between the digital x-ray detector based on a-Se used in the existing indirect conversion method and an x-ray conversion material that has better SNR(Signal-to-noise ratio) and property than the a-Se. To solve the problem that is difficult to make a large area film using Screen-Print method, we used a Screen-Print method. In this study, we used a polyclystal $HgI_2$ as x-ray conversion material and a sample thickness is $150{\mu}m$ and an area is $3cm{\times}3cm$. ITO(Indium-Tin-Oxide) electrode was used as top electrode using a Magnetron Sputtering System and each area is $3cm{\times}3cm$, $2cm{\times}2cm$ and $1cm{\times}1cm$ and then we evaluated darkcurrent, sensitivity and SNR of the $HgI_2$ film are measured, then we evaluated the electrical properties. And we used a current integration mode when I-V test. This experiment shows that the sensitivity increases in accordance with the area of the electrode but the SNR is decreased because of the high darkcurrent. Through fabricating of various thicknesses and optimal electrodes, we will optimize SNR in the future work.

• Korean journal of food and cookery science
• /
• v.30 no.6
• /
• pp.670-678
• /
• 2014

The purpose of this study was to find the optimal swelling method and condition for seacucumber to improve its taste and texture to accomodate the rapid increase of consumption. Another purpose was to try to determine an easy way to soak dried sea-cucumber under different conditions, and identify the influence of swelling time on the texture of sea-cucumber, in order to reduce preparation time and provide basic data for easy handling. After boiling or steaming for six different periods including 5, 15, 30 and 60 minutes the texture of the sea-cucumbers were compared, For the additive test, the sea-cucumbers were boiling for 30 minutes period with 4 different additives and the textures were compared, Since the texture is an important characteristic of sea-cucumber, there are many variables that affect this property including the, drying and preservation methods. This study provides basic understanding of the influence of the heating method, time and temperature on the swelling of sea-cucumber for handy use at processing sites.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.548-556
• /
• 2021

This study was conducted to investigate the applicability of lignocellulosic fiber and coconut shell activated carbon (CSA) for the production of a particulate matter (PM)-reducing air-filter as raw materials to solve the environmental problems of non-woven fabrics. CSA had a good potential to use as a raw material of air-filter for reducing volatile organic compounds as well as noxious metals, and reduction capability of the CSA was 5 times higher than that of wood fiber. Natural adhesives formulated with proteinaceous wastes mostly were applied successfully to fabricate air-filters with the shape of fiberboard. The air-filter fabricated with the minimum target density of 200 kg/m³ and the maximum CSA-content of 40 wt% in fiberboard had a good manageable strength. However, the fiberboard filters was required to make vent-holes for improving an air-permeability of the filters. Size of the CSA particles was adjusted to greater than 2 mesh with the consideration of strength and formability of the fiberboard. Three-layers fiberboard that only wood fiber and the mixture of wood fiber and CSA were formed in the surface and middle layers, respectively, was determined to the optimal condition for the production of air-filters. In addition, traditional Korean paper handmade from mulberry trees (TKP) showed a good PM-reducing property as an air-filter. It is concluded that air-filtering set composed of fiberboard with vent-holes and TKP instead of conventional air-filters made with non-woven fabrics can be used as a filter for reducing the concentrations of PM, VOC and noxious metals existed in indoor and outdoor spaces.

• Journal of Life Science
• /
• v.28 no.12
• /
• pp.1416-1423
• /
• 2018

With strong biotin binding affinity ($K_D=10^{-14}M$), the tetrameric feature of streptavidin could be used to increase the antigen binding activity of a camel heavy chain (VHH) antibody through their fusion, here stained with biotinylated horseradish peroxidase and subsequent immunoassays ELISA and Western blot analysis. For this application, we cloned the streptavidin gene amplified from the Streptomyces avidinii chromosome by PCR, and this was fused to the gene of the 8B9 VHH antibody which is specific to green fluorescent protein (GFP) antigens. To express a soluble fusion protein in Escherichia coli, we used the pUC119 plasmid-based expression system which uses the lacZ promoter for induction by IPTG, the pelB leader sequence at the N-terminus for secretion into the periplasmic space, and six polyhistidine tags at the C-terminus for purification of the expressed proteins using an $Ni^+$-NTA-agarose column. Although streptavidin is toxic to E. coli because of its strong biotin binding property, this soluble fusion protein was expressed successfully. In SDS-PAGE, the size of the purified fusion protein was 122.4 kDa in its native condition and 30.6 kDa once denatured by boiling, suggesting the tetramerization of the monomeric subunit by non-covalent association through the streptavidin moiety fusing to the 8B9 VHH antibody. In addition, this fusion protein showed biotin binding activity similar to streptavidin as well as GFP antigen binding activity through both ELISA and Western blot analysis. In conclusion, the protein resulting from the fusion of an 8B9 VHH antibody with streptavidin was successfully expressed and purified as a soluble tetramer in E. coli; it showed both biotin and GFP antigen binding activity suggesting the possible production of a tetrameric and bifunctional VHH antibody.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.114-133
• /
• 2013

This study aims to identify the natural damage of the Samcheonsaji Temple Site in Bukhansan National Park and to suggest the plans to minimize damage for the remains. The types of natural damage are classified into direct vegetation damage, indirect topographical damage, and artificial damage. The most popular causes of damage to temple sites include the roots of trees as direct vegetation damage and the soil erosion by rain or stream as topographical damage. Direct vegetation damage includes burial remains damaged by the root of trees and vines, but it is often observed that some trees have contributed to protection against collapse. Indirect topographical changes have damaged the ruins by soil erosion caused by floods or typhoons. Vegetation changes due to topographical reasons have also caused damage. Artificial reasons of damage include forestry operations and compaction by hikers. Based on the analysis of the findings, the following could be suggested as plans to resolve these problems: 1. Natural damage occurs slowly due to negligence. Therefore, it could be reduced by forestry improvement, including forest density control through thinning, planting to prevent landslides, maintaining grasslands nearby. 2. Deciduous broadleaf trees can be planted to reduce soil erosion by rainfall. It is necessary to maintain the density of forests at around $0.02{\sim}0.18trees/m^2$. 3. It would be good to grow Quercus spp and Carpinus spp or weaken the community of Robinia pseudoacacia and Pueraria lobata which disturb the ecosystem. Samcheonsaji Temple Site is located in Mt. Bukhan National Park that is a publicly owned property. Therefore, it is constantly maintained for natural preservation and vegetation management could be considered for the preservation of historical remains.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.1
• /
• pp.11-21
• /
• 2019

This study assessed the risk of disaster by using QRE(Quick Risk Estimation - UNISDR Roll Model City of Basic Evaluation Tool) tools for three natural disasters and sixteen social disasters managed by the Seoul Metropolitan Government. The criteria for selecting 19 disaster types in Seoul are limited to disasters that occur frequently in the past and cause a lot of damage to people and property if they occur. We also considered disasters that are likely to occur in the future. According to the results of the QRE tools for disaster type in Seoul, the most dangerous type of disaster among the Seoul city disasters was "suicide accident" and "deterioration of air quality". Suicide risk is high and it is not easy to take measures against the economic and psychological problems of suicide. This corresponds to the Risk ratings(Likelihood ranking score & Severity rating) "M6". In contrast, disaster types with low risk during the disaster managed by the city of Seoul were analyzed as flooding, water leakage, and water pollution accidents. In the case of floods, there is a high likelihood of disaster such as localized heavy rains and typhoons. However, the city of Seoul has established a comprehensive plan to reduce floods and water every five years. This aspect is considered to be appropriate for disaster prevention preparedness and relatively low disaster risk was analyzed. This corresponds to the disaster Risk ratings(Likelihood ranking score & Severity rating) "VL1". Finally, the QRE tool provides the city's leaders and disaster managers with a quick reference to the risk of a disaster so that decisions can be made faster. In addition, the risk assessment using the QRE tool has helped many aspects such as systematic evaluation of resilience against the city's safety risks, basic data on future investment plans, and disaster response.

• Journal of Applied Biological Chemistry
• /
• v.65 no.4
• /
• pp.287-298
• /
• 2022

This study investigated the changes in the physiochemical property, phytochemical content, nutritional content and antioxidant activity of Polygoni multiflori Radix by steam, aging, and fermentation. After processing Polygoni multiflori Radix (PMR), pH slightly decreased, while acidity increased (pH 5.70→4.78, acidity 0.23→0.29%). The reducing sugar content increased after aging and fermentation from 1.19 mg/g (PMR) to 1.40 (fermented PMR, FPMR), 1.30 (red PMR, RPMR), 1.53 (fermented red PMR, FRPMR), 1.99 (black PMR, BPMR), and 2.33 mg/g (fermented black PMR, FBPMR). Total phenolic content was highest in PMR (6.05 mg/g) and total flavonoids and maillard product were increased after aging and fermentation of PMR, and were the highest in BPMR (1.60 mg/g) and FBPMR (2.76 O.D.), respectively. The major phytochemical was 2,3,5,4'-tetrahydroxystilbene-2-0-α-glucoside, which were highest in PMR (64.9 mg/g) with 46.47 mg/g at FPMR, 33.94 mg/g at RPMR, 48.76 mg/g at FRPMR, 36.68 mg/g at BPMR and 34.35 mg/g at FBPMR. The main fatty acids and free amino acids were detected as palmitic acid (C16:0) and proline, respectively. Generally, 2,2-diphenyl-1-picrylhydrazyl and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt radical scavenging activities and FRAP reducing powers were shown high in PMR (39.06%, 98.32%, and 2.61 O.D. in extracts concentration 1.0 mg/mL), then were decreased after aging and fermentation.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1413-1425
• /
• 2023

The increasing frequency of wildfires due to climate change is causing extreme loss of life and property. They cause loss of vegetation and affect ecosystem changes depending on their intensity and occurrence. Ecosystem changes, in turn, affect wildfire occurrence, causing secondary damage. Thus, accurate estimation of the areas affected by wildfires is fundamental. Satellite remote sensing is used for forest fire detection because it can rapidly acquire topographic and meteorological information about the affected area after forest fires. In addition, deep learning algorithms such as convolutional neural networks (CNN) and transformer models show high performance for more accurate monitoring of fire-burnt regions. To date, the application of deep learning models has been limited, and there is a scarcity of reports providing quantitative performance evaluations for practical field utilization. Hence, this study emphasizes a comparative analysis, exploring performance enhancements achieved through both model selection and data design. This study examined deep learning models for detecting wildfire-damaged areas using Landsat 8 satellite images in California. Also, we conducted a comprehensive comparison and analysis of the detection performance of multiple models, such as U-Net and High-Resolution Network-Object Contextual Representation (HRNet-OCR). Wildfire-related spectral indices such as normalized difference vegetation index (NDVI) and normalized burn ratio (NBR) were used as input channels for the deep learning models to reflect the degree of vegetation cover and surface moisture content. As a result, the mean intersection over union (mIoU) was 0.831 for U-Net and 0.848 for HRNet-OCR, showing high segmentation performance. The inclusion of spectral indices alongside the base wavelength bands resulted in increased metric values for all combinations, affirming that the augmentation of input data with spectral indices contributes to the refinement of pixels. This study can be applied to other satellite images to build a recovery strategy for fire-burnt areas.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.153-161
• /
• 2023

The worldwide effects of COVID-19 have led to a surge in online shopping and contactless services. The consumption pattern has caused the issues such as the environmental pollution together with the increase of plastic waste. Reducing the reliance on the petroleum based plastic use for the package and replacing it with environmentally friendly material are the simple ways in order to solve those problems. Paper is an eco-friendly product with high recyclability as the food packaging materials but has still poor barrier properties. A barrier coating on surface of the paper can be achieved with the proper packaging materials featuring water, gas and grease barrier. Polyethylene (PE) or polypropylene (PP) coatings which are generally laminated or coated to paper are widely used in food packaging applications to protect products from moisture and provide water or grease resistance. However, recycling of packaging containing PE or PP matrix is limited and costly because those films are difficult to degrade in the environment. This study investigated the recyclability of modified acrylic emulsion coating papers compared to PE and PP polymer matrixes as well as their mechanical and gas barrier properties. The results showed that PE or modified acrylic emulsion coated papers had better mechanical properties compared to the uncoated paper as a control. PE or PP coating papers showed strong oil resistance property, achieving a kit rating of 12. Those papers also had a significantly higher percentage of screen reject during the recycling process than modified acrylic coated paper which had a screen rejection rate of 6.25%. In addition an uncoated paper had similar value of a screen rejection rate. It may suggest that modified acrylic emulsion coating paper can be more easily recycled than PE or PP coating papers. The overall results of the study found that modified acrylic emulsion coating paper would be a viable alternative to suggest a possible solution to an environmental problem as well as enhancing the weak mechanical and poor gas barrier properties of the paper against moisture.