• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.252-259
• /
• 1999

One of the most important factors for a proper design of a slender compression member may be the exact determination of the elastic critical load of that member. In the cases of non-prismatic compression member, however, there are times when the exact critical load becomes impossible to determinate if one relies on the neutral equilibrium method or energy principle. Here in this paper, the approximate critical loads of symmetrically or non-symmetrically tapered members are computed by finite element method. The two parameters considered in this numerical analysis are the taper parameter, $\alpha$ and the sectional property parameters, m. The computed results for each sectional property parameter, m are presented in an algebraic equation which agrees with those by F.E.M The algebraic equation can be easily used by structural engineers, who are engaged in structural analysis and design of non-prismatic compression member.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.669-673
• /
• 2001

The objective of this paper is to predict and evaluate the sealing performance of the thermoplastic rubber component in the proto-design stage. The large strain and large deformation properties of rubber are modeled by strain energy function and the related material constants are calculated from the test data. The viscoelastic property of the rubber is also considered using the coefficients in a Prony series representation of a viscoelastic modulus ken the compression stress relaxation test. The results show that the current design of cap mount system has 2-different stiffness caused by the cap-mount contact and the viscoelastic property of rubber plays an important role in time dependent deformation.

• Journal of Biosystems Engineering
• /
• 제25권1호
• /
• pp.11-18
• /
• 2000

In precision chemical application increment of biological efficacy with less chemical is the virtue. spraying rate and droplet size is closely related to biological efficacy. this study was performed to develope a spray-control-system that could control spraying rate and droplet size independently. Twin-fluid nozzles were selected and tested to certify if the nozzles were suitable for the objective of this study. Characteritics of the nozzles i.e., spraying rte and droplet size change u8nder the changes of spraying pressure and air pressure were statistically modeled. The model had I to 1 matching property between dependent variables and independent variables. Using the property and the model, inverse relationship could be determined between variables. A feedback spray control system was developed and tested with predetermined error of 5 % in pressure. The system showed 4 % error in spraying rate and 9 % error in droplets size. Performance of the system could be upgraded by fine tuning but, in practical sense keeping air pressure in the field sprayer was the bottle neck of commercialization of the spray system.

• 한국가구학회지
• /
• 제15권1호
• /
• pp.9-16
• /
• 2004

Five type boxes manufactured from cement(A), wood panel(B), charcoal-packed wood panel(C), plywood panel(D) and charcoal-packed plywood panel(E) were prepared. Relationship of preservation characteristic of strawberry and relative humidity, and properties of thermal and sound insulations in the boxes were examined. During the experimental duration, relative humidity in the cement box was highest and lowest in the charcoal-packed wood panel box. Weight loss of strawberry was greatest in charcoal-packed wood panel box and very little in cement box. In the boxes with charcoal-packed wood panel box and very little in cement box. In the boxes with charcoal, strawberry was preserved for 10 days without getting mold, but in cement box it was covered with mold in 3 days. The charcoal-packed boxes showed higher thermal insulation property than the cement box. There were no significant differences in the property of sound insulation among the 5 type boxes. Consequently, it is suggested that charcoal-packed wood panels can be used for a better ecomaterial.

• 농약과학회지
• /
• 제16권4호
• /
• pp.294-301
• /
• 2012

일시에 수확하는 경채류 중 쪽파와 부추에 대한 살충제 bifenthrin와 chlorfenapyr의 잔류특성을 비교 조사하였다. 수확일을 기준으로 각각 1주일 간격으로 2회 살포한 후 수확당일, 수확 3일 전, 수확 7일 전, 수확 10일 전 및 수확 14일 전에 시료를 수거하여 잔류량을 조사하였다. 수확당일의 잔류량을 기초하여 작물 중 농약살포액의 부착량을 환산한 결과, 쪽파의 경우 123.0-125.5 mL/kg, 그리고 부추에서는 70.0-74 mL/kg으로 조사되어 쪽파가 부추에 비해 더 많은 살포액이 부착될 수 있는 것으로 나타났다. 각 작물에서 bifenthrin과 chlorfenapyr의 생육기간 중 농약의 분해소실 정도를 조사한 결과, 쪽파에서 bifenthrin의 분해소실곡선은 y = 1.0334 $e^{-0.0602x}$ ($R^2$= 0.8606), chlorfenapyr는 y = 2.2603 $e^{-0.0519x}$ ($R^2$= 0.9043)이었으며, 부추에서는 bifentrhin의 경우, y = 0.7693 $e^{-0.1823x}$ ($R^2$= 0.9756), chlorfenapyr는 y = 1.2940 $e^{-0.1051x}$ ($R^2$= 0.9782)으로 나타났다. 이 분해소실곡선을 이용하여 각 작물에서 두 농약의 분해반감기를 조사한 결과, bifenthrin의 경우, 쪽파에서 분해반감기는 11.51일이었으며, 부추에서는 3.80일로서 쪽파에서의 분해 반감기가 더 긴 것으로 나타났으며, chlorfenapyr의 경우에서도 쪽파 13.35일, 부추 6.59일로 쪽파에서의 분해반감기가 더 길었다. 쪽파와 부추에서 두 농약의 잔류특성이 비교되었을 때 농약살포 후 살포액의 부착량과 작물생육기간 중 농약의 분해반감기는 부추에서보다는 쪽파에서 더 많거나 긴 것으로 나타났다.

• 한국정보과학회논문지:정보통신
• /
• 제32권2호
• /
• pp.261-277
• /
• 2005

센서 네트워크에서는 베이스 노드와 다수의 센서 노드들간의 데이타 중심 (Data-centric) 기반의 통신 모델을 사용한다는 특징을 활용하여, 오버헤드를 최소화 하면서 최저 전력 라우팅 경로를 찾고, 또한 전체 네트워크의 수명을 최대화 시킬 수 있는 PAD (Power Aware Data-centric routing protocol)를 제안한다. PAD는 최저전력 라우팅 경로와는 상관없는 통신 링크를 제거한 최저전력특징그래프(Minimum Energy Property Graph)를 찾은 후, 오버혜드를 최소화 하고 slow convergence와 라우팅 경로의 루프 문제를 해결한 Distributed Data-centric Bellman-Ford Algorithm을 사용하여 라우팅 경로를 결정한다. 특히 PAD가 제안한 최저전력특징그래프를 찾는 알고리듬은 기존의 방식에 비해서 훨씬 빠르며, 간단하여 구현이 용이하면서도 가장 적은 수의 에지를 가지는 그래프를 구한다. 이는 기존의 방식이 사용하던 path-loss 모델만을 이용한 기하학적 계산과 복잡한 알고리듬을 path-loss 모델로부터 독립시켜 전력소모를 예측할 수 있는 어떠한 방법이든지 사용 가능하게 하고 또한 최단거리 알고리듬을 사용한 결과이다. PAD는 모든 과정을 분산된 방식으로 수행하며, 또한 최소의 오버헤드만을 가지므로, 다양한 센서 네트워크 응용에서 사용할 수 있을 것으로 기대한다.

• 한국농공학회지
• /
• 제20권4호
• /
• pp.4805-4811
• /
• 1978

This paper deals with the correlations between the results of the physical property tests and the mechanical property tests for estimating the mechanical indexes by the physical property test results. The soil samples were taken at changweon area, Gyeon-gsangnam-do, where the structures would be placed on the alluvial clay foundation. The outcomes of the study are as follows: 1. Judging from casagrande's plasticity chart, it is considered that the almost all soil samples belong to inorganic silty clay with medium plasticity (clay 14∼62%, silt 36∼73%, sand 1∼29%). The specific gravities are between 2.61 and 2.72, the wet unit weights 1.53g/㎤ and 1.93g/㎤, the liquid limits 28% and 51%, the plastic limits 15% and 31%, the plastic indexes 7% and 27%, the natural moisture contents 33% and 64%. 2. The unconfined compression strengths are between 0.07kg/$\textrm{cm}^2$ and 0.77kg/$\textrm{cm}^2$, the cohesions 0.04kg/$\textrm{cm}^2$ and 0.37kg/$\textrm{cm}^2$, the internal friction angles 0$^{\circ}$ and 9$^{\circ}$. 3. The consolidation tests show that the initial void ratios are between 0.68 and 1.68, the precompression loads 0.27kg/$\textrm{cm}^2$ and 1.15kg/$\textrm{cm}^2$, the compression indexes 0.12 and 0.59. 4. The correlations between the results of the physical property tests and the mechanical property tests for the soil samples are presented as follows: rt=0.011 (203-wn), Cc=0.025 (LL-27.2), Cc=0.46 (e0-0.58), Cc=0.013 (wn-23.2), C=0.021+qu/2.08, qu=2.268rt-3.635

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.132-142
• /
• 2009

The benzophenone derivatives(4-$CH_3O$-4'-$NO_2$ and 3,4'-di-$NO_2$) are synthesized by the Fridel-Craft acylation and the nitration method. Electrochemical redox potentials of the benzophenone derivatives (4-$CH_3O$, H, 3-Cl, 3-$NO_2$, 4-$NO_2$, 4-$CH_3O$-4'-$NO_2$, 3,4'-di-$NO_2$) are measured by using cyclic voltammometry. In the relationship of summing Hammett value and redox potential, we find a proportional constant$(\rho)$ that shows a good relation with an electrochemical property and a reactivity of the benzophenone derivatives. The benzophenone substituted with the electron donating groups(4-$OCH_3$ and 4-$OCH_3-4'-NO_2$) are higher the energy in the LUMO level, then increasing a band-gap energy$(E_g)$, their $E_gs$ are obtained as a 3.94 eV and 3.59 eV, respectively.

• Applied Science and Convergence Technology
• /
• 제26권4호
• /
• pp.86-90
• /
• 2017

We have reported structural and optical properties of self-assembled InAs/GaAs quantum dot (QD) grown by molecular beam epitaxy with different arsenic to indium flux ratios (V/III ratios). By increasing the V/III ratio from 9 to 160, average diameter and height of the InAs QDs decreased, but areal density of them increased. The InAs QDs grown under V/III ratio of 30 had a highest-aspect-ratio of 0.134 among them grown with other conditions. Optical property of the InAs QD was investigated by the temperature-dependent photoluminescence (PL) and integrated PL. From the temperature dependence PL measurements of InAs QDs, the activation energies of $E_{a1}$ and $E_{a2}$ for the InAs QDs were obtained $48{\pm}3meV$ and $229{\pm}23meV$, respectively. It was considered that the values of $E_{a1}$ and $E_{a2}$ are corresponded to the energy difference between ground-state and first excited state, and the energy difference between ground-state and wetting layer, respectively.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.551-555
• /
• 2010

Electrowetting is a versatile tool to handle tiny droplets and forms a backbone of digital microfluidics. Numerical analysis is necessary to fully understand the dynamics of electrowetting, especially in designing electrowetting-based devices, such as liquid lenses and reflective displays. We developed a numerical method to analyze the general contact-line problems, incorporating dynamic contact angle models. The method is based on the conservative level set method to capture the interface of two fluids without loss of mass. We applied the method to the analysis of spreading process of a sessile droplet for step input voltages and oscillation of the droplet for alternating input voltages in electrowetting. The result was compared with experimental data. It is shown that contact line friction significantly affects the contact line motion and the oscillation amplitude. The pinning process of contact line was well represented by including the hysteresis effect in the contact angle models. In level set method, in the mean time, material properties are made to change smoothly across an interface of two materials with different properties by introducing an interpolation or smoothing scheme. So far, the weighted arithmetic mean (WAM) method has been exclusively adopted in level set method, without complete assessment for its validity. We viscosity, thermal conductivity, electrical conductivity, and permittivity, can be an alternative. I.e., the WHM gives more accurate results than the WAM method in certain circumstances. The interpolation scheme should be selected considering various characteristics including type of property, ratio of property of two fluids, geometry of interface, and so on.