• 한국전자통신학회논문지
• /
• 제18권6호
• /
• pp.1049-1056
• /
• 2023

대기경계층 고도는 지면의 가열로 인해 발생한 난류가 경계층 내의 열, 수증기 등을 혼합하면서 생성되는 꼭대기로 일반적으로 열역학적 방법을 통해 결정한다. 윈드프로파일러는 대기 중으로 보낸 신호의 산란 정보로 대기의 정보를 산출한다. 윈드프로파일러 관측으로 대기경계층 깊이를 결정하기 위해 난류 성분의 스펙트럼 및 난류운동에너지 소산율, 굴절지수구조계수를 산출하는 방법을 제시하였다. 라디오존데 자료를 기반으로 산출한 온위와 비습의 연직 분포 특징과 비교하여 윈드프로파일러 산출물 기반의 대기경계층 고도 결정 방법이 매우 유용한 것으로 평가되었다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권1호
• /
• pp.9-12
• /
• 2006

A spectral analysis and numerical simulation are employed to assess the effects of the stylus tip radius on measuring surface profiles. Original profiles with fractal spectral densities are generated and then are numerically traced with circular tipped stylus. Instead of their spectral densities, the accumulative power spectrums of traced profiles are analyzed. It is shown that the minimum wavelength of traced profile relates directly to the radius r of the stylus tip and the root-mean-square (rms) roughness ${\sigma}_o$ of original profile. From this accumulation spectral analysis, a formula is developed to estimate the minimum wavelength of traced profile. By using the concept of the minimum wavelength, an appropriate stylus tip radius can be chosen for the given rms roughness ${\sigma}_o$ of the profile.

• 통합자연과학논문집
• /
• 제7권3호
• /
• pp.183-187
• /
• 2014

Lead zirconate titanate (PZT) is significant material in electrical and optical devices for their ferroelectric, piezoelectric and dielectric properties. In this research, PZT films were fabricated by reactive RF co-sputtering method using Pb, Zr, and Ti targets. From XPS study, lead, zirconium, and titanium are successfully deposited on Si(100) substrate. Thickness of PZT films was measured with a surface profiler and the thickness was decreased as the oxygen gas ratio increased in the sputter gas.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.125-125
• /
• 2009

In this paper, we have investigated about MgO thin films on Si(100) substrate by RF magnetron Sputtering. MgO thin films were affected by RF input power, gas pressure, gas composition, and substrate temperatures. So, we focused on most effective RF input power in deposition condition. Thickness of MgO thin films was measured by surface profiler. And structural analysis carried out by X-ray Diffraction(XRD). physical characteristic and thickness of thin films changed with RF input power.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.2051-2054
• /
• 2004

This paper proposes a more accurate task level energy measurement technique for high speed microprocessors. The technique is based on the relationship of the amount of current consumed by the microprocessor and the pulse width of the power supply controller chip, employed in the synchronous buck DC-DC converter in the microprocessor's power supply. The accuracy of the measurement is accomplished by measuring variation in pulse width in each power supply cycle. The major advantage of this technique is that its accuracy does not depend on the operating frequency of the microprocessor. To prove the proposed technique, we implemented the measurement unit of the microprocessor energy meter using an FPGA chip operating at 50 MHz. Both static and dynamic load measurement are tested in order to obtain some behaviours. Moreover, various commercially available mainboards which employ synchronous buck regulators at 200 KHz switching frequency, were measured. The results agree with previous works with better accuracy at higher operating frequency.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2009년도 정기 학술대회
• /
• pp.114-118
• /
• 2009

이 논문에서는 울돌목 시험조류발전소에 구축 중인 구조건전성 감시시스템의 계획, 설치 및 활용에 대하여 소개하였다. 현재 시험조류발전소에 설치된 센서로는 전기저항식 변형률계, 광섬유 FBG(Fiber Bragg Grating) 센서, 압전형 MFC(Macro Fiber Composite) 센서, 2축 경사계, 서보형 가속도계 등과 같은 지지구조물의 구조거동을 감시하기 위한 센서와 토크 센서, RPM 센서 등 발전 계통에 대한 감시를 위한 센서, 그리고 H-ADCP(Horizontal Acoustic Doppler Current Profiler)와 같은 외력조건에 대한 계측 장비 등이 있다. 센서 설치 후 현재까지 부분적으로 계측된 자료를 소개하고, 향후 건전성 감시시스템 개선 계획을 소개하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권1호
• /
• pp.38-44
• /
• 2005

Pyrolyzed polyimide is explored in terms of MEMS material. This paper describes chemical, electrical, mechanical properties of pyrolyzed polyimide (PIX-1400) thin film as MEMS material. When polyimide thin film was pyrolyzed at $800^{\circ}C$ for 60 minutes in $N_{2}$ ambient, the residual ratio of pyrolyzed film thickness measured with a surface profiler is about 49 %, and the resistivity is about $2.17{\times}10^{-2}\;{Omega}cm$. From the result of the load-deflection test, the estimated Young's modulus and initial average stress of pyrolyzed polyimide are 67 GPa and 30 MPa, respectively. As one demonstration of MEMS structures of pyrolyzed polyimide, the fabrication method of the microbridge structure is proposed for a micro heater and a resonator.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.516-519
• /
• 2005

The pilot tidal current power plant is to be constructed at the Uldolmok between Chindo and Haenam, during next year. and extensive coastal engineering research works have been carried out. In this paper we describes some observation results of the tide and tidal current. as well as modeling work in order to investigate the tide and tidal current regime change in relation to the tidal current power plant (TCPP) construction. The special modeling skill in order to consider the turbine operation in the TCPP is developed and applied to the estimation for the flow regime change by the simple layout of the tidal current power plant.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.610-614
• /
• 2002

Time-mean and absolute geostrophic velocities of the Kuroshio current south of Japan are derived from TOPEX/Poseidon altimeter data using a Gaussian jet model. When compared with simultaneous measurements from a shipboard acoustic Doppler current profiler (ADCP) at two intersection points, the altimetric and ADCP absolute velocities correlate well with the correlation of 0.55 to 0.74. The time-mean velocity is accurate to 1 cm s$^{-1}$ to 5 cm s$^{-1}$. The errors in the absolute and the mean velocities are similar to those reported previously far other currents. The comparable performance suggests the Gaussian jet model is a promising methodology for determining absolute geostrophic velocities, noting that in this region the Kuroshio does not meander sufficiently, which provides unfavorable environment for the performance of the Gaussian jet model.

• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.87-92
• /
• 1996

When cutting 2.0cm-thick red oak and hard maple with an air-jet-assisted carbon-dioxide laser of 2kW output power, maximum feed speed at the point of full penetration of the beam decreased with increasing the angle between grain and cutting direction. Feed speed averaged 3.75 and 3.38 meters per minute for red oak and hard maple, respectively. Gray-level of laser-cut surfaces were analyzed by image analysis system. The highest gray level of laser-cut surface was obtained when red oak was cut parallel to grain by laser. Surface profiler was used to scan the sawn and laser-cut surfaces. Center line average roughnesses of laser-cut surfaces were higher than those of sawn surfaces. Scanning electron micrographs showed the cell walls which were melted by laser.