• Journal of the Korean institute of surface engineering
• /
• v.44 no.5
• /
• pp.207-212
• /
• 2011

In this study, the change in diffusion coefficient and wear characteristic with depth in the carbonitriding layer of SCM415 steel was discussed. To determine the diffusion coefficient, depth profile of carbon was measured from the surface using the Glow Discharge Spectrometer. In otherwise, measurements of carbide fraction, micro vickers hardness of surface and observation of microstructure have been implemented through the SEM image. $Fe_3$(C,N) layer and effective depth were increased as the time for carbonitriding takes longer. According to wear experiment, the results showed that wear resistance was improved by $Fe_3$(C,N) layer and effective depth.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.127-132
• /
• 2012

This study discusses photoresist forming using a composite grayscale to fabricate a Fresnel lens. Grayscale lithography is a common production method used to facilitate the forming of lenses with different curvatures and depths. However, this approach is time consuming and expensive. This study proposes a method for overcoming these obstacles by integrating a digital micromirror device and microscope to supplant the traditional physical grayscale mask. This approach provides a simple and practical maskless optical lithography system. According to the results, the two adjacent grayscales displayed substantial differences between the high grayscale and influence the low grayscale that ultimately affected photoresist formation. Furthermore, we show that change of up to 150% in the slope can be achieved by changing the grayscale gradient in the central zone and the ring profile. The results of the optical experiment show a focus change with different gray gradients.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.42-49
• /
• 2003

In this paper, we provide the results of polishing temperature distribution by way of infrared ray measurement system as well as polishing resistance, which can be interpreted as tribological aspects of CMP, using force measurement system. The results include the trend of polishing temperature, its distribution profile and temperature change during polishing. The results indicate that temperature affects greatly to the removal rate. Polishing temperature increases gradually and reaches steady state temperature and the period of temperature change occurs first tens of seconds. Furthermore, the friction force also varies as the same pattern with polishing temperature from high friction to low. These results suggest that the first period of the whole polishing time greatly affects the nonuniformity of removal rate.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.1
• /
• pp.64-74
• /
• 1994

The nonstoichiometric chalcogenides with NaCl-type structure were prepared and the physical and structural properties were studied. The homogeneous range and the structural change were studied based on X-ray powder diffractions using Rietveld-type full-profile fitting technique. Wide homogeneous ranges were observed in Y-S and Y-Se systems, and relatively narrow homogeneous ranges were observed in Yb-S and Yb-Se systems. Both in $Yb_{1-x}S\;and\;Yb_{1-x}Se$, a vacancy ordering transition occurred in (111) plane direction. The ordered superstructure had cubic symmetry(Fm$\bar{3}m) with doubled unit cell "a" parameter compared to the original NaCl-type. The superlattice developed in a continuous second-order transitiion was characterized by the reduced waved vector k= $(a^*+b^*+c^*)/2$. Y-S system had metallic, and YSe, YbSe system had semiconducting properties in their homogeneous ranges. It was observed that the change of electronic transport properties in extended homogeneous range did not depend on the relativeratio of metal to nonmetal, but on the quantities of vacancies.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.5
• /
• pp.280-284
• /
• 1985

Kinetic measurements of the 5-nitrofurfural-hydrazine reaction in various pH ranges of aquous solution were carried out by ultraviolet spectrophotometry at $25^{\circ},\;35^{\circ}\;and\;45^{\circ}C$. The observed rate of the reaction varies with the change in pH, which gives characteristic "bell-type" rate acidity profile. The maximum rate is shown in the vicinity of pH 4. This reaction procceds with rate-determining attack of hydrazine on the 5-nitrofurfural at low pH and undergoes a change in rate-determining step to dehydration of the addition intermediate as pH increases. The reaction has a "reactant-like transition state" which precedes intermediate in low pH and "product-like transition state" which follows it in neutral pH. The geometry of 5-nitrofurfural-hydrazine intermediate was estimated with PCILO method associated with CNDO/2 scheme.

• Journal of the Korean Geographical Society
• /
• v.50 no.2
• /
• pp.147-164
• /
• 2015

This study analyzed characteristics and tendencies of seasonal change on shoreline and beach with 8 beaches at East Sea coast by topographical survey for 2 years from March 2012 to February 2013. The shorelines of East Sea coast appeared that amount of seasonal change was bigger than amount of annual change. The seasonal change tendencies between Gangwon-do and Gyeongsangbuk-do coast areas existed some regional differences. To synthesize seasonal changes on 8 beaches of East Sea coast, shoreline advance and beach deposit showed clearly in summer and shoreline retreat and beach erosion showed clearly in autumn. This result is different from tendencies of seasonal change in many mid-latitude coast areas of the world, but generally corresponds with reference studies in west coast and east coast. The major factor of beach erosion showing mostly in summer is storm wave caused by typhoon. The beach erosion by storm wave also occurred in late winter. And it assumes that the beach deposit showing mostly in autumn is result of equilibrium processes of coast area against strong erosion in summer.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.4
• /
• pp.683-690
• /
• 2012

In this work, the semi-active control of a large-sized bus suspension system with an MR damper was studied. An MR damper model that can aptly describe the hysteretic characteristics of an MR damper was adopted. Parameter values of the MR damper model were suitably modified by considering the maximum damping force of a passive damper used in the suspension system of a real large-sized bus. In addition, a fuzzy logic controller was developed for semi-active control of a suspension system with an MR damper. The vertical acceleration at the attachment point of the MR damper and the relative velocity between sprung and unsprung masses were used as input variables, while voltage was used as the output variable. Straight-ahead driving simulations were performed on a road with a random road profile and on a flat road with a bump. In straight-ahead driving simulations, the vertical acceleration and pitch angle were measured to compare the riding performance of a suspension system with a passive damper with that of a suspension with an MR damper. In addition, a single lane change simulation was performed. In the simulation, the lateral acceleration and roll angle were measured in order to compare the handling performance of a suspension system using a passive damper with that of a suspension system using an MR damper.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.543-551
• /
• 2011

Steam generator tubes for nuclear power plants contain the local shape transitions on their inner or outer surface such as dent, bulge, over-expansion, eccentricity, deflection, and so on by the application of physical force during the tube manufacturing and steam generator assembling and by the sludge (that is, corrosion products) produced during the plant operation. The structural integrity of tubes will be degraded by generating the corrosive crack at that location. The profilometry using the traditional bobbin probes which are currently applied for measuring the profile change of tubes gives us basic information such as axial locations and average magnitudes of deformations. However, the three-dimensional quantitative evaluation on circumferential locations, distributional angle, and size of deformations will have to be conducted to understand the effects of residual stresses increased by local deformations on corrosive cracking of tubes. Steam generator tubes of Korean standard nuclear power plants expanded within their tube-sheets by the explosive expansion method and suffered from corrosive cracks in the early stage of power operation. Thus, local deformations of steam generator tubes at the top of tube-sheet were measured with an advanced rotating probe and a laser profiling system for the two cases where the tubes expanded by the explosive expansion method and hydraulic expansion. Also, the trends of eccentricity, deflection, and over-expansion of tubes were evaluated. The advanced eddy current profilometry was confirmed to provide accurate information of local deformations compared with laser profilometry.

• Imaging Science in Dentistry
• /
• v.38 no.1
• /
• pp.39-47
• /
• 2008

Purpose: The aim of this study was to observe a direct effect of irradiation on the periodontopathic Porphyromonas gingivalis (P. gingivalis). Materials and Methods: P. gingivalis 2561 was exposed to irradiation with a single absorbed dose of 10, 20, 30, and 40Gy. Changes in viability and antibiotic sensitivity, morphology, transcription, and protein profile of the bacterium after irradiation were examined by pour plating method, disc diffusion method, transmission electron microscopy, RT-PCR, and immunoblot, respectively. Results: Viability of irradiated P. gingivalis drastically reduced as irradiation dose was increased. Irradiated P. gingivalis was found to have become more sensitive to antibiotics as radiation dose was increased. With observation under the transmission electron microscope, the number of morphologically abnormal cells was increased with increasing of irradiation dose. In RT-PCR, decrease in the expression of fimA and sod was observed in irradiated P. gingivalis. In immunoblot, change of profile in irradiated P. gingivalis was found in a number of proteins including 43-kDa fimbrillin. Conclusion: These results suggest that irradiation may affect the cell integrity of P. gingivalis, which is manifested by the change in cell morphology and antibiotic sensitivity, affecting viability of the bacterium.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.1
• /
• pp.37-43
• /
• 1991

Cephalometric prediction tracing is the preoperative double checking procedure which can predict bony and soft tissue change. Soft tissue profile prediction is routinely performed according to the known ratios of the soft to hard tissue movement which can vary considerably in each individual. Besides interindividual variation of the ratios of the soft to hard tissue change, actual results of the postoperative soft tissue profile can reflect other important modifying factors if it is compared with prediction tracing used. The purpose of this study is to compare soft tissue prediction tracing used with postoperative tracing and to find intervening modifying factor via serial tracing. Review of 30 prediction tracing showed that the most important factor contributing to prodiction tracing inaccuracy was the skeletal and dental relapse. And, some factors which may be responsible for prediction tracing inaccuracy were discussed.