Journal of the Korean institute of surface engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지
DOI QR코드

DOI QR Code

The Change in Diffusion Coefficient and Wear Characteristic in Carbonitriding Layer of SCM415 Steel

침탄질화 처리된 SCM415강의 깊이에 따른 확산 및 마모특성 변화

  • Lee, Su-Yeon (Department of Metallurgy & Advanced Materials Engineering, Changwon National University) ;
  • Youn, Kuk-Tea (Daegu Machinery Institute of component & Materials) ;
  • Huh, Seok-Hwan (Samsung electro-mechanics) ;
  • Lee, Chan-Gyu (Department of Metallurgy & Advanced Materials Engineering, Changwon National University)
  • Received : 2011.10.07
  • Accepted : 2011.10.28
  • Published : 2011.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the change in diffusion coefficient and wear characteristic with depth in the carbonitriding layer of SCM415 steel was discussed. To determine the diffusion coefficient, depth profile of carbon was measured from the surface using the Glow Discharge Spectrometer. In otherwise, measurements of carbide fraction, micro vickers hardness of surface and observation of microstructure have been implemented through the SEM image. $Fe_3$(C,N) layer and effective depth were increased as the time for carbonitriding takes longer. According to wear experiment, the results showed that wear resistance was improved by $Fe_3$(C,N) layer and effective depth.

Keywords

References

  1. G. P. Cavallaro, Surface & Coating Technology, 71 (1995), 182. https://doi.org/10.1016/0257-8972(94)01019-F
  2. Krauss, G., Materials Park, Ohio, ASM International, (1990).
  3. H. W. Lee, Yonsei University, (2003), 11.
  4. K. Terakado, R. Urao, M. Ohmori, Metall. and Mater. Trans. A., 27A (1996) 40.
  5. M. Okumiya, Y. Tsunekawa, I. Niimi, K. Sakakibara, Mater. Trans, JIM., 35 (1994) 351. https://doi.org/10.2320/matertrans1989.35.351
  6. K. B. Park, D. M. Shin, K. S. Lee, J. Kor. Inst. Met. & Mater., 2 (2000) 338.
  7. W. B. Lee, G. I. Moon, Y. K. Cho, K. M. Lim, S. G. Byun, J. Kor. Inst. Surf. Eng., 43 (2010) 211. https://doi.org/10.5695/JKISE.2010.43.5.211
  8. H. Mallener, M. Schuiz, HTM, 48 (1993) 166.
  9. M. B. Karais, A. M. Staines, Heat treatment Metals, 16 (1989) 79.
  10. J. Zysk, J. Tacikowski, E. Kaspizycka, HTM, 34 (1979) 263.
  11. Y. K. Kim, J. Kor. Inst. Surf. Eng., 43 (2010) 91. https://doi.org/10.5695/JKISE.2010.43.2.091
  12. T. W. Kim, Y. S. Cho, Y. H. Kim, H. S. Park, The Korean Society of Tribologists and Lubrication Engineers Semiannual, 38 (2004) 214.
  13. T. W. Kim, Y. S. Cho, Y. H. Kim, H. S. Park, The Korean Society of Tribologists and Lubrication Engineers Semiannual, 38 (2004) 218.
  14. H. B. Bang, U. C. Jung, W. S. Jung, B. C. Cha, J. Kor. Inst. Surf. Eng., 44. (2011) 149. https://doi.org/10.5695/JKISE.2011.44.4.149
  15. Korean Industrial Standard, Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a microhardness test, KS D ISO 4507, (2009).
  16. C. G. Lee, J. Kor. Soc. for Heat Treatment, 19 (2006) 54.
  17. William D. Callister, David G. Rethwisch, Mater. Sci.& Eng., Sigma Press, 8 (2011) 152.
  18. E. A. Brandes, G. B. Brook Smithells Metals Reference Book, Butterworth- Heinemann, Oxford, 7 (1992).