• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.67-72
• /
• 2008

Heavy equipment is a very important factor for successful construction implementation. Also, the cost for heavy equipment is a major part of construction cost. Therefore, the estimation of equipment cost is a critical job in the construction planning phase. A formula for production rates shown in 'Standard Unit Labor' has been used to estimate construction equipment capability per hour and cost. Although the performance of equipment has been improved, the efficiency rates in the formula are not updated lately. Therefore, this research performed several site visits to measure construction equipment working time and then calculates the efficiency rates for hydraulic backhoe, loader, and dump truck. The results show that the measured efficiencies of backhoe and loader are higher than current ones and vice versa for dump truck. This research proposes the needs for a standardized calculation formula and systematic and long-term data collection and measurement for updating efficiency rates for heavy equipment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.5
• /
• pp.748-763
• /
• 2003

Anaerobic rumen microorganisms mainly bacteria, protozoa and fungi degrade ligno-cellulosic feeds consumed by the ruminants. The ruminants in developing countries are predominantly maintained on low grade roughage and grazing on degraded range land resulting in their poor nutrient utilization and productivity. Hence, manipulation of rumen fermentation was tried during last two decades to optimize ruminal fermentation for improving nutrient utilization and productivity of the animals. Modification of rumen microbial composition and their activity was attempted by using chemical additives those selectively effect rumen microbes, introduction of naturally occurring or genetically modified foreign microbes into the rumen and genetically manipulation of existing microbes in the rumen ecosystem. Accordingly, rumen protozoa were eliminated by defaunation for reducing ruminal methane production and increasing protein outflow in the intestine, resulting in improve growth and feed conversion efficiency of the animals. Further, Interspecies trans-inoculation of rumen microbes was also successfully used for annulment of dietary toxic factor. Additionally, probiotics of bacterial and yeast origin have been used in animal feeding to stabilize rumen fermentation, reduced incidence of diarrhoea and thus improving growth and feed conversion efficiency of young stalk. It is envisaged that genetic manipulation of rumen microorganisms has enormous research potential in developing countries. In view of feed resource availability more emphasis has to be given for manipulating rumen fermentation to increase cellulolytic activity for efficient utilization of low grade roughage.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.391-400
• /
• 2015

This research used a survey of 350 staff members working at Korail with the purpose of analyzing influence factors for the railway tourism policy for job satisfaction; results were presented for the proposed factor. First, we selected the influence factor through precedent research related to the railway tourism policy. Second, the selected influence factor and the extent of satisfaction were used to determine whether or not any kind of difference existed according to individual attributes of the railway employees. Finally, we analyzed what the influence factor was between the category factor and the sub-category factor. In conclusion, it was found that government subsidy had a meaningful correlation with infrastructure expansion and the improvement of the railway business as it is connected to tourism efficiency. Human resources have a meaningful correlation with the needs of educational institutions and the retaining of talent. Railway tourism production has a meaningful correlation with railway tour production as it is conducted to satisfy tourists and the consortium. The shift of viewpoint has a meaningful correlation with the escape from the peace-at-any price principle and demand forecasting.

• KDI Journal of Economic Policy
• /
• v.12 no.2
• /
• pp.51-79
• /
• 1990

Research on technical efficiency, an important dimension of market performance, had received little attention until recently by most industrial organization empiricists, the reason being that traditional microeconomic theory simply assumed away any form of inefficiency in production. Recently, however, an increasing number of research efforts have been conducted to answer questions such as: To what extent do technical ineffciencies exist in the production activities of firms and plants? What are the factors accounting for the level of inefficiency found and those explaining the interindustry difference in technical inefficiency? Are there any significant international differences in the levels of technical efficiency and, if so, how can we reconcile these results with the observed pattern of international trade, etc? As the first in a series of studies on the technical efficiency of Korea's manufacturing industries, this paper attempts to answer some of these questions. Since the estimation of technical efficiency requires the use of plant-level data for each of the five-digit KSIC industries available from the Census of Manufactures, one may consture the findings of this paper as empirical evidence of technical efficiency in Korea's manufacturing industries at the most disaggregated level. We start by clarifying the relationship among the various concepts of efficiency-allocative effciency, factor-price efficiency, technical efficiency, Leibenstein's X-efficiency, and scale efficiency. It then becomes clear that unless certain ceteris paribus assumptions are satisfied, our estimates of technical inefficiency are in fact related to factor price inefficiency as well. The empirical model employed is, what is called, a stochastic frontier production function which divides the stochastic term into two different components-one with a symmetric distribution for pure white noise and the other for technical inefficiency with an asymmetric distribution. A translog production function is assumed for the functional relationship between inputs and output, and was estimated by the corrected ordinary least squares method. The second and third sample moments of the regression residuals are then used to yield estimates of four different types of measures for technical (in) efficiency. The entire range of manufacturing industries can be divided into two groups, depending on whether or not the distribution of estimated regression residuals allows a successful estimation of technical efficiency. The regression equation employing value added as the dependent variable gives a greater number of "successful" industries than the one using gross output. The correlation among estimates of the different measures of efficiency appears to be high, while the estimates of efficiency based on different regression equations seem almost uncorrelated. Thus, in the subsequent analysis of the determinants of interindustry variations in technical efficiency, the choice of the regression equation in the previous stage will affect the outcome significantly.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.2
• /
• pp.23-27
• /
• 2008

Recently, regulation for THD (Total Harmonic Distortion) such as IEC 61000-3-2, IEEE 519 is being reinforced about a product which directly connects to AC line in order to prevent distortion of common power source in electronic equipment and electrical machinery. In order to satisfy these regulations, conventional circuits were used two-stage structure attached power factor correction circuit at ahead of converter but this method complicate the circuit and then a number of element increases thereupon the cost of production rises. in this paper, we propose a high efficiency single-stage 300W PFC fly-back converter that improved power factor and efficiency than conventional two-stage power module.

• Journal of the Korean Dietetic Association
• /
• v.8 no.4
• /
• pp.387-397
• /
• 2002

Foodservice information systems management practices were assessed in hospital foodservice operations. A total of 46 dietetic departments were responded for the study and their practices of foodservice information systems were analyzed. The respondents were questioned about general characteristics of respondents as well as hospital foodservices implementation status of information systems. Statistical data analysis was completed using the SPSS package program for descriptive analysis, factor analysis, t-test and ANOVA test. 43.2% of total respondents gained informations by benchmarking of other hospital foodservice operations, but 7.8% gained through career education. They expected the enhanced efficiency of their tasks through implementing information systems. Based on factor analysis, information systems were divided into 6 management areas such as database management, meal management, nutrition management, purchasing management, production management and foodservice management. The average implementing scores were : database management 3.77, meal management 3.26, nutrition management 3.52, purchasing management 3.26, production management 2.73 and foodservice management 3.70 (score 1 indicates very poor and score 5 is very good). Among database management areas, standard recipe database and food item specifications database build-up scores(3.91) were relatively very high, but meal assessment and foodservice management reporting scores(2.43) were very low. The results suggest that it is necessary to build up automated foodservice management reporting system for the improvement of efficiency and productivity of operational tasks.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.1
• /
• pp.186-197
• /
• 2016

This study applied the parametric bootstrapping method to analyze whether there was a change in the production efficiency of institutions under Ministry of Oceans and Fisheries. This study used input and output oriented productivity simultaneously. In particular, the productivity was estimated through 95% confidence interval derived by 2000 times re-sampling process. The results of the study showed us a reduction in overall total factor productivity by 24% between 2009 and 2013, and 7% of decreases in productivity annually. A recent conditions of an external economic shocks brought a 28% downward shift of production function. In this study, public institutions were divided into three types, which were public, quasi-government, and other public institutions. There were approximately 13%, 1%, and 5% decreases in total factor productivity per each. In analyzing the productivity each of 14 institutions, approximately DMU4 and DMU6 had 4%, and 5% increases in productivity per each. While DMU14 showed us no changes in productivity, all of the other 10 DMUs were estimated the decreases in productivities.

• Asian Journal of Business Environment
• /
• v.13 no.2
• /
• pp.21-28
• /
• 2023

Purpose: This study aims to analyze the determinants of Green Total Factor Productivity (Green TFP) growth in the agricultural sector in Indonesia from 1980-2018. Research design, data, and methodology: The growth of Green TFP in the agricultural sector is calculated using the Growth Accounting Method. Moreover, this study uses multiple linear regression to analyze the determinants of the growth of Green TFP in the agricultural sector in Indonesia. Results: The survey results show that the average growth of Green TFP in the agricultural sector in Indonesia is still negative, which indicates that the efficiency of production factor or mastery of technology is still low. Inflation and patent applications are variables that significantly affect the growth of Green TFP in the agricultural sector, where the inflation variable has a negative effect. In contrast, the variable growth of patent applications has a positive impact. Conclusions: The government needs to continue to improve efficiency by organizing various programs related to increasing mastery of technology in the agricultural sector. The government also needs to advance research and development by promoting patents to become research incentives and impact the improvement of new technologies, especially those related to the environment. Moreover, economic stability needs to be maintained through inflation control.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.1
• /
• pp.57-62
• /
• 2017

These days, shipbuilding companies are making an effort to adopt the IT technology in order to improve the production efficiency. One such effort is to utilize a planning and scheduling system to predict the production cost in advance. In this system, assessing the welding material quantity is an important factor. Unfortunately, obtaining the welding material quantity in the early design stage is extremely difficult because the detailed production information, which is essential in deriving the cost associated with welding, is normally available at a later stage. This paper aims at developing a computerized program that produces an index to estimate the welding material quantity in the early design stage. By using only three-dimensional geometric information, the program analyzes the production process and estimates the welding material quantity at any design or production stage when no production information is available. The results can be used for the planning and scheduling system.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.7
• /
• pp.1317-1325
• /
• 2008

Viral safety is an important prerequisite for clinical preparations of plasma-derived pharmaceuticals. One potential way to increase the safety of therapeutic biological products is the use of a virus-retentive filter. In order to increase the viral safety of human antihemophilic factor IX, particularly in regard to non-enveloped viruses, a virus removal process using a polyvinylidene fluoride membrane filter (Viresolve NFP) has been optimized. The most critical factor affecting the filtration efficiency was operating pH and the optimum pH was 6 or 7. Flow rate increased with increasing operating pressure and temperature. Recovery yield in the optimized production-scale process was 96%. No substantial changes were observed in the physical and biochemical characteristics of the filtered factor IX in comparison with those before filtration. A 47-mm disk membrane filter was used to simulate the process performance of the production-scale cartridges and to test if it could remove several experimental model viruses for human pathogenic viruses, including human hepatitis A virus (HAV), porcine parvovirus (PPV), murine encephalomyocarditis virus (EMCV), human immunodeficiency virus type 1 (HIV), bovine viral diarrhea virus (BVDV), and bovine herpes virus (BHV). Non-enveloped viruses (HAV, PPV, and EMCV) as well as enveloped viruses (HIV, BVDV, and BHV) were completely removed during filtration. The log reduction factors achieved were $\geq$6.12 for HAV, $\geq$4.28 for PPV, $\geq$5.33 for EMCV, $\geq$5.51 for HIV, $\geq$5.17 for BVDV, and $\geq$5.75 for BHV. These results indicate that the virus filtration process successfully improved the viral safety of factor IX.