DOI QR코드

DOI QR Code

Estimation of Construction Equipment Production Rates: Focus on Efficiency Rate

건설기계 시공능력 산정에 관한 연구 : 작업효율 중심으로

  • 박희성 (한밭대학교 토목공학과) ;
  • 한예령 (한밭대학교 토목공학과) ;
  • 허영기 (부산대학교 건축공학과) ;
  • 안방률 (한국건설기술연구원 건설코스트연구센터)
  • Received : 2006.12.28
  • Accepted : 2007.10.02
  • Published : 2008.01.31

Abstract

Heavy equipment is a very important factor for successful construction implementation. Also, the cost for heavy equipment is a major part of construction cost. Therefore, the estimation of equipment cost is a critical job in the construction planning phase. A formula for production rates shown in 'Standard Unit Labor' has been used to estimate construction equipment capability per hour and cost. Although the performance of equipment has been improved, the efficiency rates in the formula are not updated lately. Therefore, this research performed several site visits to measure construction equipment working time and then calculates the efficiency rates for hydraulic backhoe, loader, and dump truck. The results show that the measured efficiencies of backhoe and loader are higher than current ones and vice versa for dump truck. This research proposes the needs for a standardized calculation formula and systematic and long-term data collection and measurement for updating efficiency rates for heavy equipment.

건설기계는 건설사업의 성공적인 수행을 위한 중요한 요인이다. 그리고 건설기계에 소요되는 비용이 건설공사비에서 차지하는 비중이 크다. 따라서 건설기계 비용의 산정은 건설계획 단계에서 중요한 업무이다. 이를 위해서 우리나라는 표준 품셈에 제시된 건설기계 시공능력 산정식을 이용하여 건설기계의 시간당 작업량을 계산하는 방식을 활용하고 있다. 그러나 건설기계의 성능은 개선되고 있으나 시공능력 산정식에서 활용되고 있는 작업효율은 이를 반영하지 못하는 실정이다. 이에 본 연구는 유압식 백호, 로우더, 덤프트럭을 대상으로 현장실사를 통해 작업효율을 실측하였다. 그 결과 백호와 로우더는 현재 활용중인 작업효율보다 현장실사 값이 높게 나타났으며, 덤프트럭은 낮게 나타났다. 본 연구결과를 바탕으로 건설기계의 작업효율 표준 산정식에 대한 정의가 수립되어야 하며, 체계적이고 장기적인 조사를 거쳐 작업효율의 개정이 필요할 것으로 사료된다.

Keywords

References

  1. 권기태(2002) 건설기계와 시공. 동명사
  2. 김경민, 서형범, 황호정, 김경주(2007) 터널 버력처리 공정의 시 뮬레이션 적용성에 관한 연구. 한국건설관리학회논문집, 한국건설관리학회, 제8권, 제1호, pp. 141-149
  3. 대한건설기계협회(2006) http://www.kcea.or.kr
  4. 대한건설협회(2006) 건설공사 표준품셈. 대한건설협회
  5. 박현용, 태용호, 우성권(2007) 운반작업의 영향요소분석을 통한 덤프트럭의 운반속도 산정방법에 관한 연구. 한국건설관리학회논문집, 한국건설관리학회, 제8권, 제3호, pp. 97-105
  6. 원서경, 김선국, 한충희(2007) 시스템 다이내믹스를 활용한 토공 장비의 조합 모형 연구. 한국건설관리학회논문집, 한국건설관 리학회, 제8권, 제2호, pp. 194-202
  7. 전인식(1982) 건설기계화시공. 건설연구사
  8. 한국건설기술연구원(1986) '87 표준품셈 개정보완 연구보고서(기 계분야). 연구보고서, 건기연 86-M-1, 한국건설기술연구원
  9. 建設物價調査會(2006) 建設機械施工技術必携, 建設物價調査會
  10. 建設物價調査會(2006) 國土交通省土木工事 積算基準, 建設物價調 査會
  11. Park, H.S. (2003) Concrete productivity measurement for benchmarking. KSCE Journal of Civil Engineering, KSCE, Vol. 7, No. 3, pp. 217-223
  12. Park, H.S., Thomas, S.R., and Tucker, R.L. (2005) Benchmarking of construction productivity. Journal of Construction Engineering and Management, ASCE, Vol. 131, No. 7, pp. 772-778 https://doi.org/10.1061/(ASCE)0733-9364(2005)131:7(772)