• Journal of the Korea Safety Management & Science
• /
• v.4 no.4
• /
• pp.53-62
• /
• 2002

As the life standard has enhanced, food products has incomparably advanced both in quality and variety to meet the consumer's choice. Despite of high quality and variety, appropriate food safety system has not been established yet in food manufacturing. With Product Liability issuance effective on July 2002, consumers are demanding far higher food safety level than what it used to be. The food manufacturers are seeking food safety assurance system. HACCP system is a pivotal product safety system providing the infrastructure to PL. By the time in the early 1970 when HACCP was developed suitable for food, it comprised the category of Risk, in fact it was quantitative sequence system. In a preparatory phase of HACCP, decision mostly depends on the quantitative analysis. In a recent study, the introduction of Risk Analysis is being reviewed for Food Safety system. In this study, FTA, FMEA are also reviewed in comparison with HACCP which have been utilized in Safety Engineering.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.4
• /
• pp.169-185
• /
• 2003

Recently many researchers contributed to the understanding of Quality Control System, but the use of economics in the design of quality assurance system is limited in treatment of the relationship between the average incoming quality level (or average process quality level) of the incoming lot and the average outgoing quality level of this lot. In this study, a traditional concept of sampling inspection plan for the quality assurance system is extended to a consideration of economic aspects in total production system by representing and analyzing the effects between proceeding and succeeding production process including inspection process. This approach recognizes that the decision at each manufacturing process (or assembly process), is to be determined not only by the cost and the average outgoing quality level of that process, but also by the input parameters of the cost and the incoming quality to the succeeding process. By analyzing the effects of the average incoming and outgoing quality, manufacturing or assembly process quality level and sampling inspection plan on the production system, mathematical models and solution technique to minimize the total production cost for a general product manufacturing system with specified average outgoing quality limit are suggested.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.167-174
• /
• 2012

In the manufacturing process the most widely used $\bar{X}$ chart has been applied to control the process mean. Also, Accelerated Life Test(ALT) is commonly used for efficient assurance of product life in development phases, which can be applied in production reliability acceptance test. When life data has lognormal distribution, through censored ALT design so that censored ALT data has asymptotic normal distribution, $ALT\bar{X}$ control chart integrating $\bar{X}$ chart and ALT procedure could be applied to control the mean of process in the manufacturing process. In the situation that process variation is controlled, $Z_p$ control chart is an effective method for the very small fraction nonconforming of quality characteristic. A simultaneous control scheme with $ALT\bar{X}$ control chart and $Z_p$ control chart is designed for the very small fraction nonconforming of product lifetime.

• Journal of Aerospace System Engineering
• /
• v.4 no.1
• /
• pp.27-31
• /
• 2010

The scope of this paper is to analyze the safety aspects of the Ka-band payload system which are associated with testing, transportation, integration, handling and storage. According to ESA philosophy and the ECSS-Q-40A "Space Product Assurance - Safety", safety hazard analysis of Ka band payload was performed. In this paper, it is indicated the requirements to be satisfied for eliminating, reducing, or controlling the hazards and by showing how they have been implemented in the COMS design. And it shows the safety hazard analysis result which has performed the analysis according to ESA document and also shows the potential hazard cause, potential effects, hazard grade and criteria resolution of Ka band COPS.

• Journal of Industrial Convergence
• /
• v.1 no.2
• /
• pp.3-15
• /
• 2003

Many researches have concluded that product advantage or superiority is the most important factor for the commercial success of new products. However, the specific dimensions of product advantage have not been studied as yet. In order to know what kind of product attributes have been major determinants of commercial success, telecommunications winning products from 1985 to 1997 in the Korean market were examined. As results of the analysis, the determinants are classified into function, aesthetics, economy, safety, usability, reliability, brand image, assurance, distribution channel, advertisement, DEF(design for the environment). This study augmented the data set through questionnaire survey to marketing professor in University. The results will be a cue to future of new product development.

• Journal of Aerospace System Engineering
• /
• v.10 no.2
• /
• pp.22-26
• /
• 2016

Whole airplane recovery parachute system(WARPS) is a auxiliary safety system to protect occupants in emergency situation where recovery to normal flight condition is impossible. In this paper, application and certification cases of WARPS for Part 23 small airplane is introduced and considerations in certification of the WARPS installed airplane are provided in terms of performance of parachute, function and operation, loads and strength and protection of occupants.

• Journal of Aerospace System Engineering
• /
• v.9 no.4
• /
• pp.43-48
• /
• 2015

This paper presents the systematic and procedural approaches to ensure the safety of the composite material domestically developed and produced, for its use in the structure of aeronautical product in accordance with the applicable international standard, and to enhance its creditability. Based on this approaches, this paper eventually proposes the practical future plan to encourage and expand the adoption of domestic composite material as part of aeronautical product by aircraft manufacturer in global market.

• Journal of Aerospace System Engineering
• /
• v.9 no.1
• /
• pp.19-27
• /
• 2015

The Technical Standard Order articles are the parts and appliances for which the civil aviation authority designates as it is necessary to standardize for the expedited certification process and aviation safety. TSO articles were used on the type certified aircraft as replacement parts in the early days of TSO authorization system, but those articles are widely used on the newly developed aircraft as well in these days. In this paper, we compared the differences of the TSO authorization systems between FAA and EASA, and proposed the rulemaking items to improve Korean TSO authorization system and to contribute to growth of aviation industry.

• Journal of Korean Society for Quality Management
• /
• v.28 no.4
• /
• pp.119-139
• /
• 2000

In order to examine the determinants of new product success, 217 winning products in Korean market are analyzed with a focus on merchantability. For the purpose of the analysis, dimensions of products are classified into function, aesthetics, economy, safety, usability, reliability, brand image, assurance, distribution channel, advertisement, DFE(desing for the environment). The major dimensions of sinning products were identified for each category of the products. The results this study would be a cue to the future direction of new product development.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.05a
• /
• pp.503-521
• /
• 2005

Process capability indices are widely used in industries and quality assurance system. When designing the parameter on the multiple quality characteristics, there has been a study for optimization of problems, but there has been few former study on the possible conflicting phenomena in considertion of the correlations among the characteristics. To solve the issue on the optimal design for muliple quality characteristics, the study propose the expected loss function with cross-product terms among the characteristics and derived range of the coefficients of terms. Therefore, the analysis have to be required a multivariate statistical technique. This paper introduces to multivariate capability indices and then selects a multivariate process capability index incorporated both the process variation and the process deviation from target among these indices under the multivariate normal distribution. We propose a new multivariate capability index $MC_{pm}^{++}$ using quality loss function instead of the process variation and this index is compared with the proposed indices when quality characteristics are independent and dependent of each other,