• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.2
• /
• pp.43-51
• /
• 2001

Now our ocean environment pollution is very serious. Its harm hinders in marine breeding and the safe navigation of ships at the coast. We have used an assembly system for a measure taken against environment pollution like this. But, here are some problems awaiting solution. First, most of combustible materials among ocean waste are high polymer, so it is necessary some special equipment to incinerate them. In the process we can't overlook air pollution by exhaust gas. Also, when we reclaim these wastes, we remember that they can't be decomposed naturally and leaking water may pollute soil. Thus now a days new treatment method has been developed, it recycles and doesn't product secondary pollution materials by recovering oil from pyrolysis. For it, this study investigated chemicalㆍphysical properties of wastes. And it found condition of recovering the most oil. Also it probed that the variation of temperature raising speed affects the weight reduction characteristics of wastes. Also, while studying recovered oil by waste pyrolysis and the rate of non-condensing gas in accordance with the variation of temperature raising speed. Finally we had confidence the development of pyrolysis oil recovery would succeed because we carried out evaluation at an economic point of view about it.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.60-69
• /
• 2008

The principal reasons for applying a pigment coating to paper are to improve appearance and printability. The pigment coating provides a surface that is more uniform and more receptive to printing ink than are the uncoated fibers and, in turn, both facilitates the printing process and enhances the graphic reproduction. The improvement in print quality is readily apparent, especially in image areas or when multiple colors are involved. Although pigment coating of paper is to improve the printability, coated paper is not completely free from printing defects. Actually there are a number printing defects that are observed only with the coated papers. Among the printing defects that are commonly observed for coated papers, print mottle during multi-color offset printing is one of the most concerned defects, and it appears not only on solid tone area but also half dot print area. There are four main causes of print mottle ranging from printing inks, dampening solution, paper, and printing press or its operation. These indicates that almost every factors associated with lithographic printing can cause print mottle. Among these variation of paper quality influences most significantly on print mottle problems in multicolor offset printing, and this indicates that paper is most often to be blamed for its product deficiency as far as print mottle problems are concerned. Furthermore, most of the print mottle problems associated with paper is observed when coated papers are printed. Uncoated papers rarely show mottling problems. This indicates that print mottle is the most serious quality problems of coated paper products. Overcoming the print mottle is becoming more difficult because the operating speeds of coating and printing machines are increasing, coating weights are decreasing, and the demands on high-quality printing are increasing. Print mottle in offset printing is caused by (a) nonuniform back trap of ink caused by a nonuniform rate of ink drying, referred as "back trap mottle, and (b) nonuniform absorption of the dampening solution. Furthermore, both forms of print mottle have some relationship to the structure of the coated layer. The surest way of eliminating ink mottling is to eliminate unevenness in the base paper. Coating solutions, often easier to put into practice, should, however, be considered. In this paper the principal factors influencing print mottle of coated papers will be discussed. Especially the importance of base paper roughness, binder migration, even consolidation of coating layers, control of the drying rate, types of binders, etc. will be described.

• Horticultural Science & Technology
• /
• v.17 no.5
• /
• pp.572-577
• /
• 1999

Research was initiated to evaluate plant growth regulator effects on the vertical shoot growth of Korean lawngrass and to determine desirable growth regulator and its rate. The experiments were conducted twice at different sites in 1995. All the tested growth regulators inhibited the growth, but the inhibition period was variable among the product in Experiments I and II. During the first week after treatment, there was approximately 10 to 20% growth reduction in most of the treated plots. In the amidochlor-treated plots, growth suppression was effective for 3 to 4 weeks at low to medium rates ($0.60mL{\cdot}m^{-2}$). A Type II growth regulator, trinexapac-ethyl exceeding the medium rate of $0.08mL{\cdot}m^{-2}$ consistently tended to suppress vertical shoot growth for 8 weeks, being above 35% reduction in both experiments. In the plots applied with mefluidide, growth suppression appeared with foliar discoloration 3 or 4 days earlier than the other growth regulators and continued to work till the 8 weeks after treatment. Suppression intensity on vertical shoot growth increased with time after treatment up to a certain period of time, depending on growth regulators. Generally, the higher the application rate, the greater the suppression intensity. Seasonal variation of activity and effectiveness of growth regulators was observed, resulting in lower suppression intensity in July than in June. It is expected to reduce mowing requirements by 30 to up to 60% for a certain period with a specific growth regulator. In low to medium maintenance of Korean lawngrass turf, a long-term suppression may be more effectively accomplished with trinexapac-ethyl rather than mefluidide and amidochlor in terms of vertical shoot growth inhibition. Therefore, turf managers will need to select proper growth regulator and determine optimum rate of application for turfgrass management, based on a defined period of mowing reduction.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.16
• /
• pp.7061-7069
• /
• 2015

Background: During the past decades, the incidence and mortality rate of stomach cancer has demonstrated a great decrease in the world, but it is still one of the most common and fatal cancers especially among men worldwide, including Iran. The MYC proto-oncogene, which is located at 8q24.1, regulates 15% of genes and is activated in 20% of all human tumors. MYC amplification and overexpression of its protein product has been reported in 15-30% of gastric neoplasias. The aim of this investigation was to find the relative efficacy of CISH (chromogenic in situ hybridization) or IHC (immunohistochemistry) in diagnosis and prognosis of gastric cancer, as well as the relationship of amplification and expression of C-MYC gene with patient survival. Materials and Methods: In this cross-sectional study, 102 samples of gastric cancer were collected from patients who had undergone primary surgical resection at the Cancer Institute Hospital, Tehran University of Medical Sciences, from July 2009 to March 2014. All samples were randomly selected from those who were diagnosed with gastric adenocarcinomas. CISH and IHC methods were performed on all of them. Results: Patients were classified into two groups. The first consisted of stage I and II cases, and the second of stage III and IV. Survival tests for both groups was carried out with referrnce to CISH test reults. Group II (stage III & IV) with CISH+ featured lower survival than those with CISH- (p=0.233), but group I (stage I & II) patients demonstrated no significant variation with CISH+ or CISH- (p=0.630). Kaplan-Meier for both groups was carried out with IHC test findings and showed similar results. This data revealed that both diffuse and intestinal types of gastric cancer occurred significantly more in men than women. Our data also showed that CISH+ patients (43%) were more frequent in comparison with IHC+ patients (14.7%). Conclusions: For planning treatment of gastric cancer patients, by focusing on expanding tumors, which is the greatest concern of the surgeons and patients, CISH is a better and more feasible test than IHC, in regard to sensitivity and specificity. Therefore, CISH can be used as a feasible test for tumor growth and prognosis in stage III and IV lesions. This study also indicated that C-MYC amplification in gastric cancer is correlated with survival in advanced stages.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.535-541
• /
• 2020

A conventional elastic material replacement and performance evaluation are very complicated and time-consuming, and it is difficult to know when to replace the elastic material in advance. By comparing with the product limit and the functional limit, the necessity of elastic material replacement and the improvement of track support stiffness according to replacement can be immediately demonstrated based on experimental data. Using an evaluation system of track support stiffness, the performance evaluation data for elastic materials obtained through field tests using software for track support stiffness is integrated and managed on the administrator's computer. Therefore, the replacement plan is established and maintenance history is managed by identifying the replacement time and location of elastic materials. It is possible to evaluate the performance and condition of the elastic material at the various points during the working time of the track inspection and the track performance (track support stiffness) and durability of the elastic material (aging level, spring stiffness variation rate, etc.) at the operation condition. The elastic material could be replaced timely, and the deterioration of the elastic material can be continuously monitored.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1420-1426
• /
• 2006

To establish a rapid and effective method for the analysis of soy isoflavone which is known to have lots of variation in derivatives of glucoside, conversion rate from isoflavone conjugates to its aglycones, and decomposition of conversed aglycones were investigated with various acid hydrolysis conditions. A number of heating conditions for acid hydrolysis including heating at convection oven $(105^{\circ}C)$, water bath $(95^{\circ}C)$, heating block $(120^{\circ}C)$, and hot plate $(120^{\circ}C)$ were applied. Acid hydrolysis in heating block with reflux was chosen as the best heating condition. From the stability test of isoflavone aglycone during acid hydrolysis, genistein, daidzein, and glycitein did not show any significant changes in their contents for 60 min of hydrolysis. Ten to thirty milligram of sample per 1 mL HCl was the best ratio of sample to acid. As conclusion, acid hydrolysis for 60 min after addition of 15 mL HCl solution to 0.5 g soybean, and then fill up to 50 mL with methanol, followed by HPLC analysis was set as a final analysis method. From this method, isoflavone contents expressed as total aglycone of feed meal was the highest with content of $1288.5{\mu}g/g$ followed by those of dehulled meal.

• KDI Journal of Economic Policy
• /
• v.12 no.1
• /
• pp.69-91
• /
• 1990

A major change in tariff rates was made in January 1989 in Korea. The benchmark tariff rate, which applies to about two thirds of all commodity items, was lowered to 15 percent from 20 percent. In addition, the variation in tariff rates among different types of commodities was reduced. This paper examines the economic impact of the tariff reform using a multisectoral general equilibrium model of the Korean economy which was introduced by Lee and Chang(1988), and by Lee(1988). More specifically, this paper attempts to find the changes in imports, exports, domestic production, consumption, prices, and employment in 31 different sectors of the economy induced by the reform in tariff rates. The policy simulations are made according to three different methods. First, tariff changes in industries are calculated strictly according to the change in legal tariff rates, which tend to over-estimate the size of the tariff reduction given the tariff-drawback system and tariff exemption applied to various import items. Second, tariff changes in industries are obtained by dividing the estimated tariff revenues of each industry by the estimated imports for that industry, which are often called actual tariff rates. According to the first method, the import-weighted average tariff rate is lowered from 15.2% to 10.2%, while the second method changes the average tariff rate from 6.2% to 4.2%. In the third method, the tariff-drawback system is internalized in the model. This paper reports the results of the policy simulation according to all three methods, comparing them with one another. It is argued that the second method yields the most realistic estimate of the changes in macro-economic variables, while the third method is useful in delineating the differences in impact across industries. The findings, according to the second method, show that the tariff reform induces more imports in most sectors. Garments, leather products, and wood products are those industries in which imports increase by more than 5 percent. On the other hand, imports in agricultural, mining and service sectors are least affected. Domestic production increases in all sectors except the following: leather products, non-metalic products, chemicals, paper and paper products, and wood-product industries. The increase in production and employment is largest in export industries, followed by service industries. An impact on macroeconomic variables is also simulated. The tariff reform increases nominal GNP by 0.26 percent, lowers the consumer price index by 0.49 percent, increases employment by 0.24 percent, and worsens the trade balance by 480 million US dollars, through a rise in exports of 540 million US dollars and a rise in imports of 1.02 billion US dollars.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.4
• /
• pp.21-29
• /
• 2018

The contents of total nitrogen(T-N), phosphate($T-P_2O_5$), and potash($T-K_2O$) are important factors to determine the application rate of the livestock compost to prevent nutrients accumulation and maintain their appropriate levels in arable lands. The concentrations of nutrient, organic matter, salt, water content, heavy metal in livestock compost in circulation were investigated with 659 samples from 2016 to 2017. In order to investigate the fluctuation nutrient contents of livestock composts with the same product name, 19 samples were collected and analyzed T-N, and $T-P_2O_5$, and $T-K_2O$ concentration during two years. The mean levels of T-N, $T-P_2O_5$, and $T-K_2O$ in livestock composts of from 2016 to 2017 were 1.73%, 1.88%, and 1.66%, respectively. The average contents of organic matter, water, and salt were 38.9%, 40.9%, and 1.2%, respectively. There were found that the maximum concentrations of Cr, Ni, Cu, and Zn in some livestock composts were exceeded the criteria of the official standard of commercial fertilizer. The maximum variation coefficient of T-N, $T-P_2O_5$ and $T-K_2O$ content of livestock composts was found to be 24%, 27%, and 50% on average, respectively. In order to manage the nutrients in agricultural soils, it will be reasonable that the error range of T-N and $T-P_2O_5$ content in livestock composts should be recommended to be 27% in mean as variation coefficient in case of displaying the nutrient element in liverstock compost.

• Korean journal of applied entomology
• /
• v.45 no.3 s.144
• /
• pp.293-299
• /
• 2006

A survey was conducted to find out the major plant parasitic nematode in Chrysanthemum morifolium fields in Korea from May to June in 2005. A genus of Pratylenchus was determined as the most important plant parasitic nematode based on analysis of total 50 samples from 8 cities of chrysanthemum field. Pratylenchus showed 86% occurrence rate and average numbered 1,095 per 200cc soils and 1g root. Five Pratylenchus isolates, 'Muan', 'Masan', 'Tean', 'Gumi', 'Jeongup', were selected for the molecular identification of the species of Pratylenchus, and ITS and D3-28S ribosomal DNA were amplified by PCR. For the ITS, only 'Muan' isolate was differentiated by total 1 kb PCR amplification, which was 200 bp larger than all the other isolates. There was no size variation in amplified D3-28S rDNA and all isolate represented approximately 320 bp of PCR product. Sequence data of D3-28S rDNA were analysed by MegAlign program in DNASTAR software and phylogenetic tree was constructed. Sequence homology was 100% between 'Gumi' isolate and 'Tean' isolate and 'Jeongup' isolate was also close to these isolates by 99.7% sequence homology. 'Gumi', 'Tean' group and 'Jeongup' isolate were determined to be closely related to Pratylenchus vulnus by 96.7% and 96.3% similarity in respectively. D3 sequence of 'Masan' isolate was 100% identical to P. penetrans, and 'Muan' isolate showed 99.7% similarity to P. brachyurus. This result was congruent with the branch divergence pattern shown in phylogenetic tree.