• Journal of Biomedical Engineering Research
• /
• v.26 no.6
• /
• pp.407-412
• /
• 2005

Convenience is one of the most important factors in medical image segmentation. Convenience is defined by compiling opinions from radiologists, and can be described as controllable maximum automation on the condition of producing only accurate results. The components of convenience are inclusive automation and inclusive modification. Inclusive modification consists of verify-and-confirm, undo-redo, exchange of segmentation methods, and intelligent modification tools. Inclusive automation is composed of automatic selection of a method, automatic selection of a confident segment, and automated chores. The convenient segmentation tool has been developed to segment X-ray images for orthopedic surgery, and has received an excellent evaluation from radiologists.

• Microbiology and Biotechnology Letters
• /
• v.22 no.5
• /
• pp.522-530
• /
• 1994

Bacteriocin-producing lactic acid bacteria, Lactococcus sp. HY 449, was isolated from dairy products. Using response surface methodology, the various concentrations of medium compo- nents (tryptone, glucose, yeast extract, tween 80, and initial pH) were tested to find the optimum conditions for maximum bacteriocin production and growth of Lactococcus sp. HY 449. Central composite design was used to control the concentrations of medium components in the experiment. Bacteriocin production and cell growth of Lactococcus sp. HY 449 were most affected by glucose and yeast extract. Estimated optimum growth conditions of Lactococcus sp. HY 449 were as follows; tryptone 1.08%, glucose 1.129%, yeast extract 0.674%, tween 80 0.11%, and initial pH 7.19. Also estimated optimum conditions for bacteriocin production were tryptone 0.937%, glucose 1.108%, yeast extract 0.163%, tween 80 0.09%, and initial pH 6.98.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.249-250
• /
• 2006

Recently FPD(Flat Panel Display) is used in various field to display enormous information. So cutting technique of flat panel display is needed for producing variety display merchandises. In present, cutting methods of flat panel glass includes breaking process. But this process occurs many glass particles. This glass particles are directly related badness of merchandise and falling productivity. In this paper, to cut front substrate glass of LCD and to get optimized cutting condition are tried fur eliminating breaking process with developed glass cutting machine using a Piezoelectric ceramics actuator. It is known that the vibration of Piezoelectric Ceramic have effect in crack proceeding through the analysis of fracture section.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.47-53
• /
• 2005

Microholes with high aspect ratio are required in microstructures. Among various methods for producing the microhole, micro electrical discharge machining (MEDM) is very effective and useful process. But, it is difficult to machine the high aspect ratio holes below $100\;{\mu}m$ in diameter because machining condition becomes unstable due to bad removal of debris at deep hole. In this paper, ultrasonic vibration is applied to MEDM work fluid to make a high aspect ratio micro hole. It is shown that the vibration is effective in circulating the debris and increasing the machining rate. As a result, produced was a micro hole with $92\;{\mu}m$ entrance diameter, $81\;{\mu}m$ exit diameter and aspect ratio 23.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.4
• /
• pp.53-60
• /
• 2008

Electron detectors used in scanning electron microscope accept electrons emitted from the specimen and convert them to an electrical signal that, after amplification, is used to modulate the gray-level intensities on a cathode ray tube, producing an image of the specimen. Electron detector is one of the key components dominating the performance of scanning electron microscope so that the development of electron detectors having high performance is indispensable to acquire high quality images using scanning electron microscope. In this paper, we designed and manufactured an electron detector and conducted a couple of image capture experiments using it. In particular, scintillator which generates light photons when it is struck by high-energy electrons was manufactured and experimental studies on the optimization of manufacturing condition was carried out. From experiments to evaluate the performance of our detector, it was verified that the performance of our detector is equivalent to or better than that of the conventional one.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.577-578
• /
• 2006

In this paper, the rubber behavior was calculated for obtaining the optimal process condition which is for producing a transformer with a given performance. This study was carried out using the computer simulation of injection mold filling and packing simulations. In order to remove the crack of product, proper locations of the runner and cooling system configurations could be determined. Based on these results, the transformer is developed by injection molding and guidelines of part design, mold design and processing conditions are established. Finally, the cast savings, cycle time reduce and improvement of productivity will be obtained.

• Food Science and Biotechnology
• /
• v.14 no.5
• /
• pp.576-580
• /
• 2005

Ten yeast strains affecting doenjang flavor were isolated from soybean fermented foods (traditional meju and doenjang), among which Zygosaccharomyces sp. Y-2-5, showing excellent growth, glucose consumption, pH, and flavor production, was selected. Higher alcohols produced by Zygosaccharomyces sp. Y-2-5 related to flavor were 2-propanol, 1-propanol, 2-methyl-1-propanol, 1-butanol, and 3.3-dimethyl-2-butanol. Optimal culture conditions for Zygosaccharomyces sp. Y-2-5 were 10% (w/v) NaCl, pH 4.0, 3.0% (w/v) glucose concentration, and inoculation time day 0 or 15 doenjang fermentation.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.2
• /
• pp.158-163
• /
• 2000

Killer yeast, Hansenular capsulata S-13 were treated with heat, ethylmethane sulfonate and N-methyl-n'-nitro-n-nitrosoguanidine and a mutant(S13-E1), showing 2-fold higher killer toxin activity than that of parent strain to killer sensitive strain, Saccharomyces cerevisiae ATCC 38026 was obtained. Hansenular capsulata S13-E1 showed strong killer toxin activity to Saccharmyces mellis and Saccharomyces sal년 and four strains of gas-producing yeasts from traditional Doenjang and Kochujang. The culture condition for killer toxin production by Hansenular capsulata S13-E1 was optimized to be 1.0% potato extract, each 0.5% of peptone and glucose, and 0.025% MgSO4 with initial pH 4.5 at 3$0^{\circ}C$ and 36 hr of batch cultivation.

• Transactions of Materials Processing
• /
• v.19 no.5
• /
• pp.296-304
• /
• 2010

It is still needed to study the effect of process conditions on the final properties of injection-molded parts for producing precision optical products. Especially, the optical anisotropy, i.e., birefringence, is a significant factor to affect the function of many optical components. In the present study we have focused on the effect of holding and compression processes on the birefringence remaining in the transparent disc by examining the gap-wise distribution of birefringence and extinction angle. As a result, two extra birefringence and extinction peaks near the center in thickness direction showed the effect of holding pressure, which came from the flow in packing stage. However, more uniform birefringence distribution than injection-only cases could be found in injection/compression cases. Depends on the process condition even the flow reversal could be found from the distribution of extinction angle. Finally, graphical representation of optical indicatrix was added for better understanding the final structure of injection-only and injection/compression cases.

• Textile Coloration and Finishing
• /
• v.21 no.4
• /
• pp.46-56
• /
• 2009

In order to establish the standard manufacturing condition of PET flame retardant sheets, physicochetnical properties of the samples made by the conventional flame-retardant finishing were systematically investigated, including compatibility among flame retardant agent and finishing auxiliaries, surface property, and wicking property. From this results, the addition of washing and renapping process after the shearing process was required for the more effective in producing PET flame-retardant sheet by the standard finishing. The effect of the modification of the regular flame retardant finishing process was studied by FTIR, TGA, and flame retardancy test.