References
- A. I. Isayev, 1987, “Injection and Compression Molding Fundamentals”, New York and Basel. Marcel Dekker. INC.
- A. I. Isayev and C. A. Hieber, 1980, "Toward a Viscoelastic Modelling of the Injection Molding of Polymers", Rheol. Acta Vol. 19, pp. 168-182. https://doi.org/10.1007/BF01521928
- Y. B. Lee, T. H. Kwon and K. H. Yoon, 2002, "Numerical Prediction of Residual Stresses and Birefringence in Injection/Compression Molded Center-Gated Disk. Part I: Basic Modeling and Results for Injection Molding", Polym. Eng. Sci, Vol. 42, No. 11, pp. 2246-2272. https://doi.org/10.1002/pen.11114
- Y. B. Lee, T. H. Kwon and K. H. Yoon, 2002, "Numerical Prediction of Residual Stresses and Birefringence in Injection/Compression Molded Center-Gated Disk. Part II: E", Polym. Eng. Sci, Vol. 42, No. 11, pp. 2273-2292. https://doi.org/10.1002/pen.11115
- H. S. Lee and A. I. Isayev, 2007, “Numerical Simulation of Flow-Induced Birefringence: Comparison of Injection and Injection/Compression Molding” Inter. J. of Precision Eng. And Manufacturing, Vol. 8, No. 1, pp. 66-72.
- W. B. Young, “Effect of Process Parameters on Injection Compression Molding of Pickup Lens”, 2005, Applied Mathematical Modelling, Vol. 29, pp. 955-971. https://doi.org/10.1016/j.apm.2005.02.004
- C. H. Wu and W. S. Chen, 2006, “Injection Molding and Injection/Compression Molding of Three-beam Grating of DVD Pickup Lens” Sensors and Actuators A, Vol. 125, pp. 367-375. https://doi.org/10.1016/j.sna.2005.07.025
- T. H. Lin, 2009, “Birefringence, Anisotropic Shringkage and Luminance in Injection Molded Light-Guide plate; Modeling and experiment”, Dissertation, U. of Akron.
- I. K. Min, J. S. Kim, Y. B. Ko, H. P. Park and K. H. Yoon, C. J. Hwang, 2006, "An Experimental Study on The Improvement of Pattern Replication and Birefringence in LGP by Adding Compression Effects", Trans. of Materials Processing, Vol.15, No. 1, pp. 27-33. https://doi.org/10.5228/KSPP.2006.15.1.027
- S. J. Yu and K. H. Yoon, 1995, "Development of a Presentation Technique for the Birefringence Data in Injection-Molded Articles by Using an Optical Indicatrix", KSME Autumn Conference, pp. 886-891
- Hecht, E, 1987, Optics. Berlin, Massachusetts, Addison-Wesley
- H. Janeschiz-Kriegl, 1983, “Polymer Melt Rheology and Flow Birefringence”, Berlin, Springer Verlag.
- J. S. Kim, K. H. Yoon, 2004, "One Image Analysis for 2-D Birefringence Measurements by Chromatic Aberration", KSME Spring Conference, pp. 1761-1766.
- C. J. Wust and D. C. Bogue, 1983. “Stress Optical Behavior in Polystyrene; Residual Stresses and Birefringence in Large, Quenched Samples”, J. of Applied Polymer Science. Vol. 28, PP. 1931-1947. https://doi.org/10.1002/app.1983.070280609
- E. Lee, T. Rogers and T. Woo, 1965. “Residual Stresses in a Glass Plate Cooled Symmetrically from Both Surfaces”, J. of the American Ceramic Society. Vol. 48, P. 480. https://doi.org/10.1111/j.1151-2916.1965.tb14805.x