• The Research Journal of the Costume Culture
• /
• v.13 no.1
• /
• pp.150-160
• /
• 2005

As apparel manufacturers have increased their outsourcing garment making to cope with the rapid changing market, the information sharing has been the most important factor for the Korean apparel industry. The purpose of this research was to study the present state and the needs of the information sharing between the apparel manufacturers and the contractors; and the relationship between the product property (basic/fashion product) and the information sharing property. A total of 86 Korean apparel manufacturers were surveyed for the study. The results are: 1) the information sharing level on manufacturing capacity, manufacturing processing condition, and product quality were a bit higher than other surveyed information, but the level on inventories and sales were lower than others. in addition, the information sharing needs by online system of manufacturing capacity, manufacturing processing condition, and product quality were greater than other information; 2) In the case of fashion product, the information sharing needs of product quality by online system were much greater than in the case of basic product. This study is expected to help apparel manufacturers to construct their information sharing system which is apt for their product property and needs.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.2213-2221
• /
• 1999

A line segment has a symmetrical property about its midpoint. With this symmetrical property for a line segment we have proposed a variant of Bresenham's line drawing algorithm that selects two pixels at the same time. It implies that bi-directional line drawing toward the midpoint of line segment from each-end be possible. Besiders, it can select two pixels using only one decision parameter, instead of two different parameters for each pixel. We also present a theoretical proof for the correctness of such a selection. Thus, we can reduce the time of generating line segment by approximately less than 5% compared to the Bresenham's method. Also, our experimental results show that the shape of line segment generated by the proposed approach is the exactly same as that of Bresenham's method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.104-111
• /
• 2010

This paper presents an adaptive image enhancement method using the spatial frequency property in the DCT(discrete cosine transform) compressed domain. The dc coefficients, the illumination components of image, are adjusted to compress the dynamic range of image, and the ac coefficients are modified to enhance the contrast by using the human visual system(HVS) and the spatial frequency property. The ac coefficients are separated into vertical direction, horizontal direction, and mixed spatial frequency components, and adaptively modified to minimize the block artifacts that possibly occur in the image enhancement. The proposed method using dynamic range compression and adaptive contrast enhancement shows the advanced performance without the block artifact compared with existing method.

• Journal of Ceramic Processing Research
• /
• v.20 no.spc1
• /
• pp.86-91
• /
• 2019

A solid-state route was used to prepare sodium titanium oxide (NTO, Na2Ti3O7) as a solar heat protecting material with an impressive solar reflectance (TSR = 94.3%) using a high refractive index rutile TiO2. The solar reflectance of the synthesized NTO was measured using UV-Vis-NIR spectrophotometer. Solar reflectance property of the synthesized compound depends on the calcination temperature. The solar reflectance property of the synthesized NTO powder was compared with commercial rutile TiO2. The compound synthesized at 900 ℃ for 24 hrs had remarkable solar reflectance 94.3% than that calcined below 900 ℃. Crystalline nature, structural property, morphology and optical properties of NTO powders were characterized and analyzed using XRD, FE-SEM, EDS and UV-Vis-NIR spectrophotometer. From the results, we guessed that NTO would be a suitable "solar heat protecting candidate" for energy-saving applications in coating industries.

• Transactions of Materials Processing
• /
• v.32 no.2
• /
• pp.67-73
• /
• 2023

To overcome a climate change, manufacturing complex-shaped electric mobility parts becomes one of the important issues for enhancing a performance of motor with reducing their weight. Therefore, development of laser-based additive manufacturing shed on light due to their flexible manufacturing capacity that can be suitable to solve the poor formability of Fe-Si alloys for electric mobility parts. Although there are several studies existed to optimize the performance of additively manufactured Fe-Si alloys, the post-annealing effect was not well investigated yet though this is important to control the texture and mechanical properties of additively manufactured parts. In the present work, annealing effect on the mechanical property and microstructure of additively manufactured Fe-4.5Si alloy was investigated. Because of the ordered phase initiation after annealing, the hardness of additively manufactured Fe-4.5Si alloy increased up to 1173 K while a hardness drop occurs at the 1273 K condition due to the micro-crack initiation. The response surface methodology result represents the 1173 K-5 h sample is an optimal condition to maximize the mechanical property of additively manufactured alloy without micro-cracks.

• Transactions of Materials Processing
• /
• v.33 no.3
• /
• pp.169-177
• /
• 2024

Recently, hydrogen energy has been widely used because of strict regulations on greenhouse gas emissions. For using the hydrogen energy, it is required to supply hydrogen through a tube trailer. However hydrogen tube trailer can have excessive load problems during transportation due to reasons such as road shape and driving method, which may lead a risk of hydrogen leakage. So it is necessary to secure a high level of safety. The purpose of this study is to evaluate structural safety for the conservative design of hydrogen tube trailer. First, finite element(FE) modeling of the designed hydrogen tube trailer was performed. After that, safety evaluation method was established through static structural simulation based on the standard GC207 conditions. In addition, effectiveness of the designed model was confirmed through the results of the structural safety evaluation. Finally, driving simulation was used to derive acceleration graph according to time, which was considered as a dynamic property for the evaluation of conservative tube trailer safety evaluation. And dynamic structural simulation was conducted as a condition for actual transportation of tube trailer by applying dynamic properties. As a results, conservative safety was evaluated through dynamic structural simulation and the safety of hydrogen tube trailer was confirmed through satisfaction of the safety rate.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.284-296
• /
• 2005

Bridge displacement measurement system using image processing is developed to overcome the contact type system inefficiencies such as heavy, expensive property and temporary construction necessity. The system is composed of tablet PC with IEEE1394 digital camera, telescope lens and a designed target mark. The key is projection algorithm where all pixels are added up for each row(column) to find out the center line. The experimental results are shown compared with a contact type system.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.110-111
• /
• 2006

Most applications of polymers involve blends and mixtures of components including solvents, surfactants, copolymers, fillers, organic or inorganic functional additives, and various processing aids. These components provide unique properties of polymeric materials even beyond those tailored into the basic chemical structures. In addition, skillful processing extends the properties for even greater applications. The perennial challenge of polymer science is to understand and exploit the structure-processing-property interplay relationship. We are developing and demonstrating combinatorial methods and high throughput analysis as tools to provide this fundamental understanding.

• Journal of Information Processing Systems
• /
• v.7 no.1
• /
• pp.75-84
• /
• 2011

The enhanced pyramid graph was recently proposed as an interconnection network model in parallel processing for maximizing regularity in pyramid networks. We prove that there are two edge-disjoint Hamiltonian cycles in the enhanced pyramid networks. This investigation demonstrates its superior property in edge fault tolerance. This result is optimal in the sense that the minimum degree of the graph is only four.

• The KIPS Transactions:PartB
• /
• v.12B no.1 s.97
• /
• pp.1-8
• /
• 2005

The importance of software is getting high in development of the digital device (digital camcoder, digital camera, mp3 player, ....). And because the sire of software becomes larger and complicated, the necessity of software configuration management (to solves a software crisis) is increased. The general software configuration management system shows lack of the property and features of software development environment for image processing algorithm due to its wide range to be covered. Image processing algorithm development environment has properties like repetitive analysis and simulation using visual programming environment where, beside support of elementary development functions. component(or library) can be combined and tested interactively. Moreover, the method to look fast and effectively for component having similar function is required. In this paper, we present the system which supports the software configuration management method for a simulation tool and the property in the visual programming environment. And we relate our system to real simulation tool so as to check its ability as the software configuration management system for image processing algorithm development environment.