• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.10
• /
• pp.1144-1148
• /
• 2012

Process conditions for generating nano patterns handle different process according to the pattern characteristics, and different process data according to patterns in questions. To efficiently find optimal process conditions for generating nano patterns, process data by experiment is needed consideration of the pattern characteristics concerning the equipment. In particular, coating methods of a cylindrical mold differ from it of a flat plate because of viscosity of coating materials. Also the coating thickness affects nano process and pattern line width. So coating method of coating thickness for cylindrical mold is very important on nano pattern generating. In this study, a method is proposed for coating Photo Resist through the spray in order to coat cylindrical mold and measuring the thickness of coating using measuring tip considering the size of cylindrical mold because there is no method in the existing SEM. The proposed method is applied to a real printed electronics system to verify its accuracy and efficiency.

• Journal of Korean Elementary Science Education
• /
• v.30 no.4
• /
• pp.634-645
• /
• 2011

The purpose of this study was to investigate the analysis on the pattern and proposition process of science inquiry problems proposed by elementary school general students and science-gifted ones. The science inquiry problems were composed of one quantitative problem and one qualitative problem. To conduct this study, general students and science-gifted ones of grade 4 and 5 in elementary schools were selected. The results of this study were as follows. In both quantitative and qualitative problem, most of the students, including all the sciencegifted students and general ones, used N-IP pattern and S2 proposition process strategy to propose inquiry problems. In the relationship between proposed problem and proposition process strategy, when using S2 strategy, N-IP problems were chiefly proposed. And when using S2, S3 strategies, more patterns of inquiry problems were generated than using any other strategies. Drawing proposition processes of inquiry problem into map, science-gifted students used much more proposition process strategies than general ones.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.51-54
• /
• 2005

Light Guide Plate (LGP) of LCD-BLU(Back Light Unit) is manufactured by forming optical pattern with $5\~100um$ in diameter on the LGP by means of sand blasting or etching method. However, in order to improve the luminance of LCD-LGP, the design of optical pattern has introduced UV inclined-exposure process in this study. This micro-optical pattern, which has asymmetric elliptical column shaped pattern, can change low viewing-angle to high viewing-angle, as well as it contribute to diffusion of light. As a result, this type of micro-optical pattern can introduce the highly luminance. The PR structure obtained in the stage of lithography has asymmetric elliptical column shape and it is processed into a micro-optical pattern. Optical design with this kind of micro-optical pattern, mold fabrication by electroplating and LGP molding with injection molding are under way.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.3
• /
• pp.124-130
• /
• 2015

The purpose of this study is to investigate friction characteristics according to micro-dimple patterns. The surface texturing of micro-dimple patterns was tested to examine the friction of pin-on-disk using flat-on-flat contact geometry. The patterns of both dimple circle and groove pattern were adopted to carry out the effect of those ones. In the low loads, such as 13.8N and 27.7N, the friction coefficients of groove pattern were lower than those of dimple circle pattern. In many other comparisons of normal loads, the groove pattern had lower friction forces, which showed the effect of surface texturing. The relationship between sliding time and friction forces showed that the increase of friction forces of groove pattern were relatively lower than those of dimple pattern. In conclusion, the dimple patterns of dimple-circle pattern and groove pattern strongly contributed to reducing the friction between contacting materials.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.3
• /
• pp.344-349
• /
• 2017

In this study, we developed a process technology to fabricate RFID tag antennas using a one-sheet inlay micro-pattern forming process by press-molding RFID tag antennas on insulation sheet layers, such as polymer films, using ultrasonic longitudinal vibration. In addition, a fine pattern applicable for RFID tag antennas was manufactured using a $25{\mu}m$ thick thin-plate square wire; this is in contrast to the method that uses a conventional round wire. The developed ultrasonic indentation process can be used to fabricate fine pattern of the RFID antenna using one piece of equipment. The simplified manufacturing process technology has a shorter manufacturing time and is more economical. The developed RFID tag antenna forming technique involves pressing the $25{\mu}m$ square wire directly on the thin sheet insulation sheet of maximum thickness $200{\mu}m$, using a 60 kHz ultrasonic tool horn.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.113-119
• /
• 1999

Recently, design patterns have been known to be highly effective and practical. Design pattern is a collection of collaborating classes that captures the application independent behavior of system in a particular domain. By using design pattern, the development time and software quality can be greatly increased. However, systematic development process and detailed instructions of building design patterns have not been studied enough. In this paper. we propose practical intranet structure modeling technique that are based on design pattern. The proposed process consists of the four typical software development phases; analysis, navigation, interface, behavior domain design, and each phase is defined as a logical sequence of development tasks. Since the proposed process is based on design pattern foundation, and can be efficiently produced by applying this process.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.573-577
• /
• 2012

Based on latest research, the parametric quality statistics cannot be used in non-normal process with demand pattern of many-variety and small-volume, since it involves extremely small sample size. The research proposes nonparametric quality statistics according to the number of lot or batch in the non-normal process. Additionally, the nonparametric Process Capability Index (PCI) is used with 14 identified non-normal distributions.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.2
• /
• pp.66-75
• /
• 1998

The computer simulation model was used to forecast the concentrations of COD$_{cr}$, NH$_{4}$$^{+}$-N and NO$_{3}$$^{-}$-N in each reactors. In the biological wastewater treatment system, the computer simulation model was used to observe the behavior of pollutants especially. In this research, effect of SRT, feeding pattern and recirculation rate on UCT(University of Cape Town) process was evaluated by computer simulation model. T-N removal was affected to the SRT. SRT for effective T-N removal was 15 days or longer. Feeding pattern in UCT process was affected to the T-N removal. Feeding pattern which 100% loading to the first reactor was most effective for T-N removal. The effect of recirculation rate was clear for T-N removal. The recirculation from anoxic reactor to anaerobic reactor was not need but the recirculation from oxic reactor to anoxic reactor was need. In aspect of nitrogen removal efficiency, A/O process was higher than UCT process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.698-700
• /
• 2003

LGP (Light-Guide Panel) of TFT-LCD Backligh/Frontlight is one of the major components which affect on the product quality of LCD. Since the brightness distribution of LGP is sensitive to the process error in manufacturing, the optical characteristics such as reflection and absorption of LGP pattern should be modeled including the process error. LGP is developed by using the fast and reliable design technology, which uses the concept of the inverse-design, makes the model on the characteristics of uncertainty in the manufacturing process, and designs the dispersion pattern analytically without try-and-error by using an artificial intelligence. The PEA(Process-Error-Adaptive) design gives the best solution in handling the process error. The offset of target in feedback system makes such the best pattern design possible that the brightness distribution is nearly same (more than 90%) with target in regardless of the miscellaneous errors in mass production. The present design method has been also applied to frontlight and multi-side-lamp(eg., four-side-four-lamp) backlight.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.2
• /
• pp.142-150
• /
• 2016

This paper developed new manufacture process technology of slim type flexible flat lighting product used lower power white LED. Flexible flat lighting is applied to letter sign lighting, traffic lighting, interior wall lighting, flat lighting, aquarium back lighting, wreath light etc. Main manufacture process technology were developed drawing software for electronics circuit, inkjet electronic circuit pattern and inkjet white ink coating. For pattern printing it was utilized for piezoelectonic inkjet head printing technology. Also high vacuum pressure laminating technology was waterproofing for LED flat lighting protection. Hence, form process technology we were manufactured for flexible flat lighting product of the power 12 W, input voltage 48 V and plane size $480{\times}480mm$. It acquired a these validity from experiment results.