Browse > Article
http://dx.doi.org/10.14775/ksmpe.2015.14.3.124

A Study on Friction Characteristics According to Micro-dimple Patterns  

Hwang, Nam-Seong (Dept. of Mechanical Engineering, Yeungnam University College)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.14, no.3, 2015 , pp. 124-130 More about this Journal
Abstract
The purpose of this study is to investigate friction characteristics according to micro-dimple patterns. The surface texturing of micro-dimple patterns was tested to examine the friction of pin-on-disk using flat-on-flat contact geometry. The patterns of both dimple circle and groove pattern were adopted to carry out the effect of those ones. In the low loads, such as 13.8N and 27.7N, the friction coefficients of groove pattern were lower than those of dimple circle pattern. In many other comparisons of normal loads, the groove pattern had lower friction forces, which showed the effect of surface texturing. The relationship between sliding time and friction forces showed that the increase of friction forces of groove pattern were relatively lower than those of dimple pattern. In conclusion, the dimple patterns of dimple-circle pattern and groove pattern strongly contributed to reducing the friction between contacting materials.
Keywords
Pin-on-disk; Micro Dimple Pattern; Dimple-circle Pattern; Groove Pattern; Surface Texturing;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Nakada, N.,"Trends in Engine Technology and Tribology", Tribology and International, Vol. 27, No.1, pp.3-8, 1994.   DOI
2 Kim, S. G., Song, K. C., Kim, S. B., and Chae, Y. H., "Effect of Surface Texturing under Grease Lubrication", Journal of the KSTLE Vol. 24, No. 5, 2008.
3 Hamilton, D. B., Walowit, J. A., and Allen, C. M., "A Theory of Lubrication by Microasperities", Journal of Basic Engineering, Vol. 88, No. 1, pp.177-185, 1966.   DOI
4 Anno, J. N., Walowit, J. A., and Allen, C. M., "Microasperity Lubrication", ASME Journal of Lubrication of Technology, Vol. 90, No. 2, pp. 351-355, 1968.   DOI
5 Anno, J. N., Walowit, J. A., and Allen, C. M., "Load Support and Leakage from Microasperity-Lubricated Face Seals", ASME Journal of Lubrication of Technology, Vol. 91, No. 4, pp. 726-731, 1969.   DOI
6 Wang, X., Kato, K., and Aizawa, K., "Loads Carrying Capacity Map for the Surface Texture Design of SiC Thrust Bearing Sliding in Water", Tribology International, Vol. 36, No. 3, pp. 189-197, 2003.   DOI
7 Wang, X., Kato, K., and Aizawa, K.,"The effect of Laser Texturing of SiC Surface on the Critical Load for the Transition of Water Lubrication Mode from Hydrodynamic to Mixed", Tribology International, Vol. 34, No. 10, pp. 703-711, 2001.   DOI
8 Park, S. H., Yoo, H. M., and Lee, W. I., "Numerical Analysis of Micro-pattern Filling with Gas Dissolution by Injection Molding Process", Journal of KSMPE, Vol. 13, No. 4, pp.21-27, 2014.
9 Kwon, H. H.,"Manufacturing on the Door Built-in Pattern using Electroforming with Hologram", Journal of KSMPE, Vol. 14, No. 1, pp.15-20, 2015.