• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 가을 학술발표회 논문집
• /
• pp.19-24
• /
• 1989

The current load combination criteria for design of nuclear power plant structures are not based on the probability-based design concept but rely on the conventional design concept. In this paper, a load combination criteria for design of NPP coin-tainment structures are proposed based on a FEM-based random vibration analysis. More accurate reliability analyses under various dynamic loads such as earthquake loads were made possible by incorporating the FEM and random vibration theory, which is different from the conventional reliability analysis method. In this paper, the load factors for the design of NPP structures in Korea are proposed by considering appropriate fond combination criteria for design.

• Nuclear Engineering and Technology
• /
• 제33권5호
• /
• pp.457-467
• /
• 2001

It is well known that the performance of a fuzzy neural network strongly depends on the input features selected for its training. In its applications to sensor signal estimation, there are a large number of input variables related with an output As the number of input variables increases, the training time of fuzzy neural networks required increases exponentially. Thus, it is essential to reduce the number of inputs to a fuzzy neural network and to select the optimum number of mutually independent inputs that are able to clearly define the input-output mapping. In this work, principal component analysis (PCA), genetic algorithms (CA) and probability theory are combined to select new important input features. A proposed feature selection method is applied to the signal estimation of the steam generator water level, the hot-leg flowrate, the pressurizer water level and the pressurizer pressure sensors in pressurized water reactors and compared with other input feature selection methods.

• Journal of the Korean Data and Information Science Society
• /
• 제15권4호
• /
• pp.867-877
• /
• 2004

The sequential sampling inspection method is an extension of the multiple-sampling methods, and its theory is based on the sequential probability ratio test (SPRT) of Wald. In this paper, the characteristics of SPRT for testing the number of defects are approximated by using the estimated excess over the boundaries. The use of the estimated excess shows good performances in estimating the operating characteristic function and the average sample number of SPRT compared to the method by neglecting the excess. It also makes it possible to determine the boundary values which satisfy the desired error probabilities.

• 산업기술연구
• /
• 제19권
• /
• pp.391-402
• /
• 1999

The numerical model predicting the behaviours of submerged mound constructed by dredged material is developed in this paper. The model is based on the Bailard's sediment transport formula, Stokes' second-order wave theory and the sediment balance equation. Nonlinear partial differential equation which is the same form as convection-dispersion equation which represents change of bed section can be obtained by substituting sediment transport equation for equation of sediment conservation. By this process, the analytical solution by which the characteristic of the behaviours of submerged mound can be estimated is derived by probably combining the convention coefficient and the dispersion coefficient governing the behaviours of submerged mound and the probability density function representing the wave characteristics. The validity of the analytical solution is verified by comparing the analytical solution which is assumed to estimate the movement rate submerged mound by bed-load with the field data of the past and its characteristic is analyzed quantitatively by obtaining the mean of the dispersion coefficient representing the extent of the decrease rate of the submerged mound height.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.180-190
• /
• 1997

A new method in the fault tree analysis (FTA) for the reliability calculation is suggested. Two steps are necessary in traditional method in evaluation of the occurrence probability of top event in fault tree (FT). The first step is to find the minimal outsets, and the second one is to substitute the result into the poincare equation. In order to reduce the enormous computing time of this method, lots of rapid algorithms have been developed. Almost of all achievements were, however, based on the partial structural properties of FT. In this paper, the FT is transformed to a non-linear graph G which has the same minimal outsets of original n, and then the reliability is calculated using the domination theory. In this new method, the required number of equation terms are at most $2^n$ (n is node number of graph G), while $2^m$-1 (m is the number of minimal cutsets) calculation terms are required in the poincare equation in traditional method. Since m>>n in general. our new method reduces the calculation time significantly.

• 대한수학회보
• /
• 제53권5호
• /
• pp.1353-1362
• /
• 2016

Using the notion of complete nonabelian exterior square $G\hat{\wedge}G$ of a pro-p-group G (p prime), we develop the theory of the exterior degree $\hat{d}(G)$ in the infinite case, focusing on its relations with the probability of commuting pairs d(G). Among the main results of this paper, we describe upper and lower bounds for $\hat{d}(G)$ with respect to d(G). Here the size of the second homology group $H_2(G,\mathbb{Z}_p)$ (over the p-adic integers $\mathbb{Z}_p$) plays a fundamental role. A further result of homological nature is placed at the end, in order to emphasize the influence of $H_2(G,\mathbb{Z}_p)$ both on G and $\hat{d}(G)$.

• 한국항행학회논문지
• /
• 제2권1호
• /
• pp.34-42
• /
• 1998

임의로 변하는 미지의 입력을 갖는 표적의 추적을 위한 적용 상태 및 입력 추정기를 설계한다. 미지의 입력을 semi-Markov 프로세스로 모델링하고, 이를 Bayesian 추정이론에 접목함으로써 여러개의 Kalman 필터가 병렬로 구성된 효과적인 적용 상태 및 입력 추정기를 구한다. 컴퓨터 모사를 통하여, 제안된 적응추정기는 임의로 변하는 미지의 입력에도 불구하고 개선된 추적성능을 보임을 확인하였다.

• Journal of Communications and Networks
• /
• 제14권3호
• /
• pp.225-229
• /
• 2012

We examine spectrum sensing in a situation of uncertain channel model. In particular, we assume that, besides additive noise, the observed signal contains an interference term whose probability distribution is unknown, and only its range and maximum power are known. We discuss the evaluation of the detector performance and its design in this situation. Although this paper specifically deals with the design of spectrum sensors, its scope is wider, as the applicability of its results extends to a general class of problems that may arise in the design of receivers whenever there is uncertainty about how to model the environment in which one is expected to operate. The theory expounded here allows one to determine the performance of a receiver, by combining the available (objective) probabilistic information with (subjective) information describing the designer's attitude.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.75-83
• /
• 2010

Every mechanical part for mass production has dimensions with tolerances in engineering drawing. Tolerance is given to guarantee assemble parts together satisfying functional requirements and dimensional constraints. Tolerance is essential factor for standardization of parts or assembly and has huge influence on manufacturing cost. It will be desirable to have tolerances as broad as possible for minimizing manufacturing cost. This paper describes tolerance analysis of u-joint assembly that is a part of automobile steering system. Within the range of tolerances of parts, accumulated effect is estimated by arithmetic calculation, probability theory and Monte carlo simulation. Each result is compared to investigate the method for increasing productivity.

• Communications for Statistical Applications and Methods
• /
• 제21권2호
• /
• pp.183-191
• /
• 2014

We define a multivariate Cauchy distribution using a probability density function; subsequently, a Ferguson's definition of a multivariate Cauchy distribution can be viewed as a characterization theorem using the characteristic function approach. To clarify this characterization theorem, we construct two dependent Cauchy random variables, but their sum is not Cauchy distributed. In doing so the proofs depend on the characteristic function, but we use the cumulative distribution function to obtain the exact density of their sum. The derivation methods are relatively straightforward and appropriate for graduate level statistics theory courses.