• ETRI Journal
• /
• v.42 no.2
• /
• pp.258-271
• /
• 2020

A correlation exists between luminance samples and chrominance samples of a color image. It is beneficial to exploit such interchannel redundancy for color image compression. We propose an algorithm that predicts chrominance components Cb and Cr from the luminance component Y. The prediction model is trained by supervised learning with Laplacian-regularized least squares to minimize the total prediction error. Kernel principal component analysis mapping, which reduces computational complexity, is implemented on the same point set at both the encoder and decoder to ensure that predictions are identical at both the ends without signaling extra location information. In addition, chrominance subsampling and entropy coding for model parameters are adopted to further reduce the bit rate. Finally, luminance information and model parameters are stored for image reconstruction. Experimental results show the performance superiority of the proposed algorithm over its predecessor and JPEG, and even over JPEG-XR. The compensation version with the chrominance difference of the proposed algorithm performs close to and even better than JPEG2000 in some cases.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.3
• /
• pp.384-391
• /
• 1998

When a device is mounted on the PCB, it is impossible to have zero defects due to many unpredictable problems. Among these problems, devices with bent corner leads due to mis-handling and which are not placed at a given point measured along the axis are principal problem in SMT(Surface Mounting Technology). It is obvious that given the complexity of the inspection task, the efficiency of a human inspection is questionable. Thus, new technologies for inspection of SMD(Surface Mounting Device) should be explored. An example of such technologies is the Automated Visual Inspection(AVI), wherein the vision system plays a key role to correct this problem. In implementing vision system, high-speed and high-precision are indispensable for practical purposes. In this paper, a new algorithm based on the Radon transform which uses a projection technique to inspect the FIC(Flat Integrated Circuit) device is proposed. The proposed algorithm is compared with other algorithms by measuring the position error(center and angle) and the processing time for the device image, characterized by line scan camera.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.5
• /
• pp.185-190
• /
• 2006

The security analysis relates to the ability of the electric systems to survive sudden disturbances such as electric short circuits or unanticipated loss of system elements. It is composed of both steady state and dynamic security analyses, which are not two separate issues but should be considered together. In steady state security analysis including voltage security analysis, the analysis checks that the system is operated within security limits by OPF (optimal power flow) after the transition of a new operating point. On the other hand, dynamic security analysis deals that the transition will lead to an acceptable operating condition. Transient stability, which is the ability of power systems to maintain synchronism when subjected to a large disturbance, is a principal component in dynamic security analysis. Usually any loss of synchronism will cause additional outages. They make the present steady state analysis of the post-contingency condition inadequate for unstable cases. This is the reason of the need for dynamics of systems. Probabilistic criterion can be used to recognize the probabilistic nature of system components and shows the possibility of system security. A comprehensive conceptual framework for probabilistic static and dynamic assessment is presented in this paper. The simulation results of the Western System Coordinating Council (WSCC) system compare an analytical method with Monte-Carlo simulation (MCS). Also, a case study of the extended IEEE Reliability Test System (RTS) shows the efficiency of this approach.

• Journal of KIEE
• /
• v.11 no.1
• /
• pp.69-77
• /
• 2001

This paper describes an image processing algorithm capable of recognizing road lanes by using a CDF(cumulative distribution function). The CDF is designed for the model function of road lanes. Based on the assumptions that there are no abrupt changes in the direction and location of road lanes and that the intensity of lane boundaries differs from that of the background, we formulated the CDF, which accumulates the edge magnitude for edge directions. The CDF has distinctive peak points at the vicinity of lane directions due to the directional and the positional continuities of a lane. To obtain lane-related information a scatter diagram was constructed by collecting edge pixels, of which the direction corresponds to the peak point of the CDF, then the principal axis-based line fitting was performed for the scatter diagram. Noises can cause many similar features to appear and to disappear in an image. Therefore, to reduce the noise effect a recursive estimator of the CDF was introduced, and also to prevent false alarms or miss detection a scene understanding index (DUI) was formulated by the statistical parameters of the CDF. The proposed algorithm has been implemented in real time on video data obtained from a test vehicle driven on a typical highway.

• Journal of Navigation and Port Research
• /
• v.31 no.2
• /
• pp.133-139
• /
• 2007

Relative importance of maritime transport that takes charge of main current of freight in country' economy is very large. Especially, port and facility carry out important role which treats freight of import and export smoothly and improves international trade as turning point, to achieve key role on connection and association between sea and land. For such reason, enlargement of port facilities or development of port needs to grasp exactly the utilization of port, attributes and selective factors of shipper. On the other hand, the amounts of physical distribution on Mokpo port located in Korean west coast are increasing, with fast economic growth of East Asian including China. This study uses discrete choice model that is measuring to analyze attribute and characteristic of Mokpo port, and analyzes port selection by decision factors of shipper. This paper composed a questionnaire using the result of preceding research, to decide port selection factor among competitive ports. Through factor analysis on a basis of the questionnaire' result, five principal components were extracted. These are resorted out by Logit model, to grasp competitive elements of port. This research fin present direction which raises competitive power of ports in west coast of Korea, especially on alternative and concentration of middle-class port as Mokpo may be useful.

• Journal of Mechanical Science and Technology
• /
• v.19 no.12
• /
• pp.2213-2223
• /
• 2005

In order to reconstruct a full 3D human model in reverse engineering (RE), a 3D scanner needs to be placed arbitrarily around the target model to capture all part of the scanned surface. Then, acquired multiple scans must be registered and merged since each scanned data set taken from different position is just given in its own local co-ordinate system. The goal of the registration is to create a single model by aligning all individual scans. It usually consists of two sub-steps: rough and fine registration. The fine registration process can only be performed after an initial position is approximated through the rough registration. Hence an automated rough registration process is crucial to realize a completely automatic RE system. In this paper an automated rough registration method for aligning multiple scans of complex human face is presented. The proposed method automatically aligns the meshes of different scans with the information of features that are extracted from the estimated principal curvatures of triangular meshes of the human face. Then the roughly aligned scanned data sets are further precisely enhanced with a fine registration step with the recently popular Iterative Closest Point (ICP) algorithm. Some typical examples are presented and discussed to validate the proposed system.

• Journal of the Korean Society of Food Culture
• /
• v.31 no.6
• /
• pp.624-633
• /
• 2016

This study identified the sensory properties of samples of pizza dough at three pizza companies and three masonry oven pizzerias from Seoul, Korea and compared consumer acceptability among panels of university students. Six pizza dough samples were prepared (pan pizzas from Pizza Hut, Mr.pizza, and Dominos pizza, masonry oven baked pizzas from Appleteen, Mr.Lee's, and Pizza factory). Consumer tests were employed involving 97 Korean consumers. Consumers evaluated overall liking (OL), liking of appearance (APPL), odor (ODL), flavor (FLL), and texture (TXTL), willing to try (WT), and willing to recommend (WR) for the samples using a nine-point hedonic scale. Analysis of variance (ANOVA) indicated that HutP, MrP, and DomP samples had significantly (p<0.05) high scores for roughness, porosity, crust color, grain size, brownness, dairy food aroma, savory taste, and yeast aroma, which had the highest OL, ODL, and FLL scores. LeeP, ATeenP, and PFacP samples had high elasticity, cohesiveness, and adhesiveness. Consumers favored the appearance characteristics and color, dairy product flavor, and savory flavor of the pan pizza and preferred cohesiveness, toughness, and stickiness of masonry oven baked pizza.

• Korean journal of food and cookery science
• /
• v.24 no.5
• /
• pp.580-592
• /
• 2008

The principal objective of this study was to develop a standardized recipe for the large-scale production of Bibimbab, bean sprout bab, and fried rice. The recipe was standardized as follows. We collected and recorded the quantities of ingredients and production procedures currently used by cooks in the contracted foodservice management company and in hotel-based Korean restaurants. According to the food preferences of Koreans, we selected 3 rices; Bibimbab, bean sprout bab, and fried rice. We then developed a revised recipe and evaluation form. Our sensory evaluation was conducted by 30 taste panels using a JAR(just- about-right) scale. We developed a standardized recipe for 3 rices. Yield, portion size, temperature, preparation time, equipment, cost, ingredients, weight of ingredients, method, and critical point were recorded in the developed recipe. We utilized the factor method and the percentage method for recipe adjustments, and we devised a direct measurement table for Bibimbab, bean sprout bab, and fried rice.

• Current Research on Agriculture and Life Sciences
• /
• v.26
• /
• pp.45-54
• /
• 2008

The purpose of this research is to develope street trees management program for more an effective street trees management. The principal point of this program is to relate spatial data and attribute data that is the main concept in GIS(Geographic Information System). To do this function, MapObjects which is ESRI's mapping and GIS components was used to process spatial data and Access which had been developed by MS was used to manipulate attribute data in this program. Visual Basic also was used to design and develop user interfaces and procedures, relate two sort of data, and lastly complete Application. Relational data model was adopted to design tables and their relation, Antenucci's GIS development model was selected to design and complete this program. The configuration of this application is composed of management data and reference data. The management data includes the location of street tree, a growth condition, a surrounding environment, the characters of tree, an equipments, a management records and etc. The reference data include general information about tree, blight and insects.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.17 no.4
• /
• pp.408-417
• /
• 1988

This study optimized the condenser dimension of heat pump system with the heat sources which are solar irradiation and ambient air. At first, the author selected the principal design factors influencing the performance of heat pump system. And the author considered the variation of condenser dimension according to the variation of the selected design factors, that is, ambient air temperature, condenser temperature, degree of superheating, degree of sub-cooling and irradiation. As a result this study, among refrigerants R12, R22 and R500, refrigerant R22 has more heating output than R12 and R500, and the coefficient of performance on this heat pump system is not greatly influenced by the degree of superheating and degree of sub cooling. The ambient air temperature is below $5^{\circ}C$ at balance point and the optimal tube length of condenser dimension is about 3.8 m. Also the author gained the optimal design diagram for the optimization of condenser dimension according to various design factors.