• 생물환경조절학회지
• /
• 제22권4호
• /
• pp.341-348
• /
• 2013

본 연구에서는 토성에 따른 물의 이용효율을 높이면서 재배 작물의 생산성을 최대화하기 위한 효율적인 자동관개 로직을 개발하고자, 수분장력값을 관수 개시점으로 하여 물 공급 유지와 멈춤을 간헐적으로 수행하는 펄스형 관개방식과 측정한 수분장력값을 이용하여 토양수분량을 예측해 재배작물에 적합한 물량을 추가 투입하는 필요물량계산 관수방식을 적용하여 토성이 다른 실험베드에서 2년간 토마토 작물을 재배하면서 토양수분 함량과 장력의 변화를 측정비교하였다. 물공급 30초와 멈춤 30분 및 15분 조건을 이용한 펄스형 관수방식과 필요물량계산 방식에서 얻어진 수분장력값은 목표한 -20kPa 조건에 비해 각각 -42~-8kPa, -20~-10kPa로 나타나 필요물량 계산방식이 균일한 수분장력을 유지하는 측면에서는 유리하였으나 토양수분상태는 상대적으로 습하였다. 공시 토성 모두에서 수분함량은 수분장력에 비해 시간반응이 빠르면서 물공급에 따라 비례적으로 증가하는 경향이 뚜렷하였다. 수분변화 값은 펄스형 관수와 필요물량계산 관수방식의 경우 사양토 기준으로 각각 17~24%, 19~31%로서 펄스형 관수방식이 수분변화 값이 작으면서 시간에 따라 안정적인 값을 유지한 것으로 나타났는데 이는 물공급에 따른 수분함량의 시간변화가 수분장력에 비해 뚜렷하게 빠름과 관계가 있는 것으로 판단하였다. 이러한 결과로부터 펄스형 관수방식은 수분함량값을 이용하여 수분을 조절하는 것이 유리함을 의미한다.

• Journal of Biosystems Engineering
• /
• 제39권2호
• /
• pp.101-110
• /
• 2014

Purpose: The purpose of this study is to develop a system to optimize drying potential energy of the exhausted hot air by changing relative humidity of the air. This study modified the conventional drying method into a drying method changing exhaust cycle and time in order to control the relative humidity of the exhausted hot air during drying process. Method: A valve on the vent was controlled according to a preset time to change the exhaust cycle and time. This study analyzed the influence of the two different types of drying method on the drying characteristics, required energy, and quality of the dried peppers: conventional drying method exhausting hot air continuously and new drying method controlling exhaust cycle and time. Results: Drying characteristics based on exhaust time showed that drying time increased with exhaust time, and specific energy consumption was reduced by 28% from 18.39 MJ/kg (conventional method) to 13.24 MJ/kg when exhaust time was set to one minute. Drying characteristics based on heating time showed that drying time increased with heating time and specific energy consumption was reduced by 30% from 18.39 MJ/kg (conventional method) to 12.87 MJ/kg when exhaust time was set to 22 minutes. Drying characteristics based on exhaust cycle showed that drying time increased with exhaust cycle, and specific energy consumption was reduced by 31% from 18.39 MJ/kg (conventional method) to 12.69 MJ/kg when exhaust time was set to one minute and exhaust cycle was set to 22 minutes before drying and 40 minutes after drying. The quality of the dried red peppers showed that capsaicin, color, and sugar content were high as 34.87 mg/100g, 66.33, and 11.87%, respectively, when exhaust time was set to one minute and exhaust cycle was set to 22 minutes before drying and 40 minutes after drying. Conclusions: In order to utilize the drying potential energy of the exhausted air during drying process, the conventional drying method was modified into the drying method controlling exhaust cycle and time. The results showed that drying with exhaust cycle of one minute was more efficient in terms of drying time, required energy, and quality of the dried peppers than the one with exhaust cycle of 20~40 minutes.

• Journal of Multimedia Information System
• /
• 제5권3호
• /
• pp.163-170
• /
• 2018

We developed a multicast communication packet radio protocol using a time-sharing tablet system ("wireless token ring") to achieve the efficient exchange of files among packet radio terminals attached to swans. This paper provides an overview of the system and the protocol of the packet communications. The packet device forming the main part of the transceiver developed is the Texas Instruments CC2500. This device consists of one call-up channel and one data transmission channel and could improve error frame correction using FEC (forward error correction) with 34.8 kbps MSK and receiving power of at least -64 dBm (output 1 dBm at distance of 200 m using 3 dBi antenna). A time-sharing framework was determined for the wireless token ring using call sign ordinals to prevent transmission right loss. Tests using eight stations showed that resend requests with the ARQ (automatic repeat request) system are more frequent for a receiving power supply of -62 dBm or less. A wireless token ring system with fixed transmission times is more effective. This communication protocol is useful in cases in which frequency resources are limited; the energy consumed is not dependent on the transmission environment (preset transmission times); multiple terminals are concentrated in a small area; and information (position data and vital data) is shared among terminals under circumstances in which direct communication between a terminal and the center is not possible. The method allows epidemiological predictions of avian influenza infection routes based on vital data and relationships among individual birds based on the network topology recorded by individual terminals. This communication protocol is also expected to have applications in the formation of multiple in vivo micromachines or terminals that are inserted into living organisms.

• Journal of Communications and Networks
• /
• 제2권1호
• /
• pp.58-68
• /
• 2000

In this paper we introduce the correlation-aided distributed sample acquisition (CDSA) scheme for fast cell search in IMT-2000 W-CDMA cellular system. The proposed scheme incorporates the state symbol correlation process into the comparison-correction based synchronization process of the original DSA scheme to enable fast acquisition even under very poor channel environment. for its realization, each mobile station (MS) has to store in its memory a set of state sample sequences. which are determined by the long-period scrambling sequences used in the system and the sampling interval of the state samples. CDSA based cell search is carried out in two stages : First, the MS first acquires the slot timing by using the primary synch code (PSC) and then identifies the igniter code which conveys the state samples of the current cell . Secondly. the MS identifies the scrambling code and frame timing by taking the comparison-correction based synchronization approach and, if the identification is not done satisfactorily within preset time. it initiates the state symbol correlation process which correlates the received symbol sequence with the pre-stored state sample sequences for a successful identification. As the state symbol SNR is relatively high. the state symbol correlation process enables reliable synchronization even in very low chip-SNR environment. Simulation results show that the proposed CDSA scheme outperforms the 3GPP 3-step approach, requiring the signal power of about 7 dB less for achieving the same acquisition time performance in low-SNR environments. Furthermore, it turns out very robust in the typical synchronization environment where large frequency offset exists.

• 한국정보통신학회논문지
• /
• 제22권6호
• /
• pp.861-866
• /
• 2018

OLED(Organic Light-Emitting Diode) 제조에서 에이징(aging) 공정은 제조 효율을 높이고 에이징 보정을 위한 보정 값을 측정한다. OLED의 에이징 보정을 위한 보정 값은 구동 신호에 적용할 수 있다. OLED 에이징 공정은 미리 설정된 구동신호와 온도에 의해 정해진 시간 동안 빛을 출력한 후 전류를 측정한다. OLED 제조 공정에서 증착 및 기온에 의해 균일하지 않은 것에 대해 에이징을 가하는 것이다. 이 시간이 OLED 효율 감소에 미치는 영향은 거의 없다. 에이징을 위해 필요한 조건을 만들기 위해 가열장치와 신호 생성 시스템이 요구된다. 가열장치와 신호 생성 시스템에 의해 측정된 결과값은 OLED 제조에서 전력 요구사항, 균일성, 효율성을 평가하는 근거로 사용할 수 있다. 이에 본 논문에서는 실용적인 OLED 에이징 보정을 위한 구동 신호 생성 및 가열 시스템의 연동을 위한 구성을 제안하고 이를 구현하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.342-343
• /
• 2013

AlSb is a promising material for optical devices, particularly for high-frequency and nonlinear-optical applications. And AlSb offers significant potential for devices such as quantum-well lasers, laser diodes, and heterojunction bipolar transistors. In this work we study molecular beam epitaxy (MBE) growth of an unstrained AISb film on a GaAs substrate and identify the real-time monitoring capabilities of in situ spectroscopic ellipsometry (SE). The samples were fabricated on semi-insulating (0 0 1) GaAs substrates using MBE system. A rotating sample stage ensured uniform film growth. The substrate was first heated to $620^{\circ}C$ under As2 to remove surface oxides. A GaAs buffer layer approximately 200 nm- thick was then grown at $580^{\circ}C$. During the temperature changing process from $580^{\circ}C$ to $530^{\circ}C$, As2 flux is maintained with the shutter for Ga being closed and the reflection high-energy electron diffraction (RHEED) pattern remaining at ($2{\times}4$). Upon reaching the preset temperature of $530^{\circ}C$, As shutter was promptly closed with Sb shutter open, resulting in the change of RHEED pattern from ($2{\times}4$) to ($1{\times}3$). This was followed by the growth of AlSb while using a rotating-compensator SE with a charge-coupled-device (CCD) detector to obtain real-time SE spectra from 0.74 to 6.48 eV. Fig. 1 shows the real time measured SE spectra of AlSb on GaAs in growth process. In the Fig. 1 (a), a change of ellipsometric parameter ${\Delta}$ is observed. The ${\Delta}$ is the parameter which contains thickness information of the sample, and it changes in a periodic from 0 to 180o with growth. The significant change of ${\Delta}$ at~0.4 min means that the growth of AlSb on GaAs has been started. Fig. 1b shows the changes of dielectric function with time over the range 0.74~6.48 eV. These changes mean phase transition from pseudodielectric function of GaAs to AlSb at~0.44 min. Fig. 2 shows the observed RHEED patterns in the growth process. The observed RHEED pattern of GaAs is ($2{\times}4$), and the pattern changes into ($1{\times}3$) with starting the growth of AlSb. This means that the RHEED pattern is in agreement with the result of SE measurements. These data show the importance and sensitivity of SE for real-time monitoring for materials growth by MBE. We performed the real-time monitoring of AlSb growth by using SE measurements, and it is good agreement with the results of RHEED pattern. This fact proves the importance and the sensitivity of SE technique for the real-time monitoring of film growth by using ellipsometry. We believe that these results will be useful in a number of contexts including more accurate optical properties for high speed device engineering.

• Composites Research
• /
• 제24권2호
• /
• pp.30-37
• /
• 2011

에폭시 수지와 유리섬유직물 간의 젖음성을 분석하였다. 에폭시 수지와 산무수물 경화제의 혼합비는 당량비 1:0.5, 1:1, 1:1.2로 하였고, 촉매는 혼합된 수지의 0.lwt%로 첨가하였다. DSC 경화거동분석 결과 이 혼합 수지는 상온에서 함침이 가능하였다. 혼합 수지에 대해 유리평판에 놓여진 유리섬유직물 위에 수지 한 액적(방울)을 투하 후 시간에 따른 접촉각 변화를 측정하였다, 또한, 일정량의 에폭시 수지 액적을 투하시켜 시간에 따른 젖음면적 변화를 측정하였다, 접촉각, 액적높이, 순수 젖음면적, 젖음계수를 측정함으로써 유리섬유직물에 대한 에폭시 수지의 젖음성을 비교 평가하였다. 그 결과 당량비 1:1.2에서 유리섬유직물에 대한 젖음성이 가장 우수하였다.

• 한국가스학회지
• /
• 제2권3호
• /
• pp.88-95
• /
• 1998

회전기계의 진동해석은 기계의 이상을 미리 판정하여 적절한 유지 보수를 수행하기 위한 지표로 팔용이 가능하다 현재 평택기지에 설치된 고장진단시스템은 LNG펌프의 진동수치가 위험수준에 도달시 기계적 결함부위 진단을 할 수 있다. 본 연구는 Windows NT환경에서 DSP보드를 사용한 자동진단시스템 개발에 대한 것이다. 펌프의 상태진단을 위해 2개의 가속도센서로부터의 속도신호를 해석하고 펌프의 상태에 대한 다양한 그래프를 보여주며 특정 진동값을 일정시간 간격마다 저장하여 펌프의 결함 발생시 운전자가 컴퓨터 모니터에서 전문가 시스템을 활용하여 자동으로 진단하고 경향을 감시함으로써 펌프의 상태를 점검할 수 있다.

• 한국정보통신학회논문지
• /
• 제18권11호
• /
• pp.2786-2791
• /
• 2014

본 논문은 사용자의 장애 환경에 맞추어 장애 환경설정을 이용함으로서 조명 이용의 편의성을 향상시키고 에너지 절약을 위한 지능형 조명시스템에 관한 연구이다. 장애 환경은 조명의 점등이 원활하지 않은 상태를 의미하는 것으로서 이를 해결하기 위한 방법으로 원격제어 방식이 요구된다. 원격제어 방식은 스마트폰, 움직임 센서, 타이머를 이용하여 조명을 점등 한다. 스마트폰과 움직임 센서는 이벤트를 감지하였을 때 원격에서 조명 시스템으로 이벤트 발생을 전송하고 이벤트를 수신한 조명 시스템은 램프를 전등한다. 조명 사용자의 설정 환경에 맞추어 조명을 제어함으로서 사용시간을 조절하고 점등 조작을 감소하여 에너지 절약을 실현한다. 제안 기법을 적용하여 조명시스템을 설계 및 구현하여 실험 결과 편의성이 향상 되었고 최적화된 점등으로 약 13.5w/h 정도 에너지가 절감된다.

• 상하수도학회지
• /
• 제33권2호
• /
• pp.121-129
• /
• 2019

If sewage flows for an extended time at low velocities, solids may be deposited in the sewer. Sufficient velocity or tractive force should be developed regularly to flush out any solids that may have been deposited during low flow periods. This study aims to evaluate the periods (T) during which sewage flow greater than the minimum tractive force maintains on a spot in sewer pipe system with lower tractive force or lower velocity than expected in the design step, when a storage tank installed in a place upsteam pours water into the sewer. The effect to T of design factors of storage tank and sewer pipes was evaluated assuming the uniform flow in sewers. When the area of orifice in the storage tank is $0.062m^2$(or 0.28 m diameter), the maximum T of 31sec was maintained using the usually used preset range of values of several design factors. As the horizontal cross section of storage tank and water depth of storage tank and roughness in sewers increase, T linearly increases. Also, T linearly decreases as the diameter of a sewer pipe increases. Although T gradually decreases as the sewer pipe slope decreases to around 0.005, T decreases sharply when the slope is less than 0.003.