• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.322-327
• /
• 2007

Dedicated outdoor air-conditioning(DOA) system that utilizes pre-cooling and desiccant dehumidification can be superior to conventional cooling and reheating system with respect to energy consumption and indoor thermal comfort. In this work, simulation has been conducted to study various factors that affect the performance of DOA. Dynamic simulation shows the transient variation of temperature and humidity as the on/off control logic is imposed. Exit humidity of process air and flow rate are varied to study the effect on exit temperature of process air, dehumidification quantity, required regeneration temperature and exit humidity of regeneration air. For an outdoor air condition of $28.5^{\circ}C$ temperature, 16 g/kg humidity ratio and 2000 cmh flow rate, the dehumidification efficiency is increased by 4.6% as the flow rate is doubled.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.72-81
• /
• 2017

We propose a switching control scheme for the control of a ball and beam system. It was reported in [4] that a ball and beam system is a nonlinear system which has an ill-defined relative degree. So, the traditional control approaches have been mostly either Jacobian-based control or approximate input-output linearized control in nature. In this paper, motivated by [7], we combine these two traditional control approaches and operate each controller via a pre-designed switching logic so that the improved control result can be obtained without any excessive use of control input. Switching algorithm is developed based on both analysis and actual experimental observation. We verify the effectiveness of our proposed controller via actual experimental results.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.3
• /
• pp.166-171
• /
• 2015

In this paper, we measure the current and vibration signals of one-dimensional time series that occur in a motor and pump, respectively. These machines are representative rotary and pumping machines. We also eliminate unnecessary components such as noise by pre-processing the current and vibration signals. Then, in order to diagnose fault signals for the pump and motor, we transform from one-dimensional time series to a two-dimensional phase portrait using Takens’ embedding method. After this transformation, we review the variation in the pattern according to the fault signals.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.1109-1112
• /
• 2020

This paper presents a low cost hardware message passing engine of enhanced atomic pipelined broadcast based on processing node status. In this algorithm, the previous atomic pipelined broadcast algorithm is modified to reduce the waiting time until next broadcast communication. For this, the processor change the transmission order of processing nodes based on the nodes' communication channel. Also, the hardware message passing engine architecture of the proposed algorithm is modified to be adopted to multi-core processor. The synthesized logic area of the proposed hardware message passing engine was reduced by about 16%, compared by the pre-existing hardware message passing engine.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.11
• /
• pp.963-970
• /
• 2016

This research deals with design and performance validation of eco-pedals that generate tactile pedal force to guide fuel saving driving behavior. For eco-pedal control logic, allowable fuel consumption at given driving speed is calculated based on pre-defined "allowable acceleration", and if the actual fuel consumption exceeds the allowable fuel consumption, then pedal force is activated. Pedal force should be recognizable to driver while not causing unpleasantness, and should not interfere with normal operation of pedal. Reaction forces that increase pedal stiffness abruptly, such as step and ramp shape, turn out to be not suitable due to pedal overshoot after release of reaction force. With this regards, vibration type reaction force is adopted, and its optimal frequency, magnitude and duration is determined through subjective evaluation with consideration to effect to fuel efficiency. Though highway and city driving test, it is demonstrated that fuel efficiency increase of 13% for highway and 15% for city is achieved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6C
• /
• pp.601-609
• /
• 2002

The efficient Viterbi decoder that supports full data-rate output of DAB system was proposed. Viterbi decoder consumes lots of computational load and should be designed to be fast specific hardware. In this paper, SST scheme was adopted for Viterbi decoder with puncturing to reduced the power consumption. Puncturing vector tables are modified and re-arranged to be designed by a hardwired logic to save the system area. New re-scaling scheme which uses the fact that the difference of the maximum and minimum of the path metric values is bounded is proposed. The proposed re-scaling scheme optimizes the wordlength of path metric memory and greatly reduces the computational load for re-scaling by controlling MSB of path metric memory. Another saving of computation is done by proposed algorithm for branch metric calculation, which makes use of pre-calculated metric values. The designed Viterbi decoder was synthesized using SAMSUNG 0.35$\mu$ standard cell library and occupied small area and showed lower power consumption.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.5
• /
• pp.380-386
• /
• 2022

This paper proposes a method for structuring the preprocessing process of a training image when color is applied using Pix2Pix, one of the adversarial generative neural network techniques. This paper concentrate on the prediction result can be damaged according to the degree of light reflection of the training image. Therefore, image preprocesisng and parameters for model optimization were configured before model application. In order to increase the image resolution of training and prediction results, it is necessary to modify the of the model so this part is designed to be tuned with parameters. In addition, in this paper, the logic that processes only the part where the prediction result is damaged by light reflection is configured together, and the pre-processing logic that does not distort the prediction result is also configured.Therefore, in order to improve the usability, the accuracy was improved through experiments on the part that applies the light reflection tuning filter to the training image of the Pix2Pix model and the parameter configuration.

• Philosophy of Medicine
• /
• v.25
• /
• pp.3-26
• /
• 2018

Medicine and philosophy were very closely related in antiquity. The Pre-Socratics were interested in physiological and pathological aspects of human body. Their interests of human body was a part of interests on nature. Plato and Aristotle were fond of proposing their philosophical arguments using medical analogy. Medicine and philosophy were regarded as two disciplines which play a similar role in human being. Ancient philosophers thought that medicine and philosophy were similar on the ground that while philosophy eliminates passion from human soul, medicine eliminates disease from human body. Here, they regarded the similarity of medicine and philosophy only in terms of analogy. More comprehensive and systematic relationship between medicine and philosophy is realized by Galen. He manifestly declared that "The Best Doctor is also a Philosopher", which is also the title of one of his treatise. In this treatise, Galen regarded philosophy is a discipline consisted of physics, logic, and ethics according to the view s of Stoics. As a result, a good doctor for Galen is one who is well versed in physics, logic, and ethics. Furthermore, He regarded Hippocrates as the ideal model of a doctor-philosopher.

• Journal of Internet Computing and Services
• /
• v.12 no.5
• /
• pp.47-61
• /
• 2011

Recently, the importance of digital forensic has been magnified because of the dramatic increase of cyber crimes and the increasing complexity of the investigation of target systems such as PCs, servers, and database systems. Moreover, some systems have to be investigated with live forensic techniques. However, even though live forensic techniques have been improved, they are still vulnerable to anti-forensic activities when the target systems are remotely accessible by criminals or their accomplices. To solve this problem, we first suggest a layer-based model and the anti-forensic scenarios which can actually be applicable to each layer. Our suggested model, the Anti-Forensic Activites layer-based model, has 5 layers - the physical layer, network layer, OS layer, database application layer and data layer. Each layer has possible anti-forensic scenarios with detailed commands. Second, we propose a fuzzy expert system for effectively detecting anti-forensic activities. Some anti-forensic activities are hardly distinguished from normal activities. So, we use fuzzy logic for handling ambiguous data. We make rule sets with extracted commands and their arguments from pre-defined scenarios and the fuzzy expert system learns the rule sets. With this system, we can detect anti-forensic activities in real time when performing live forensic.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.1
• /
• pp.255-269
• /
• 1997

In this paper, we describe the implementation of C cross-compiler for the ES-C2340 DSP2 processor by using the GNU compiler. For the rapid and efficient developing of the compiler and other parts like the processor-dependent back -end which is implemented newly to build the compiler. This approach has several advantages. First, as we use GNU compiler's well-proved excellent optimization method and multi-language support capability, we can improve he efficiency and generality of the compiler. Second, as we concentrate on the high-level language as logic approving tool in processor developing process. And to support the cross-compiler, we also implement a text-level pre-linker.