• Membrane Journal
• /
• v.15 no.2
• /
• pp.114-120
• /
• 2005

The purpose of this study is to obtain practical information about membrane coupled $ A_2O$ system for muncipal wastewater treatment. A flat-plate microfiltration (MF) module with a pore size $0.25\;{\mu}m$ was submerged into the aeration basin and treated water was filtrated through the membrane by continuous suction with low pressure. The system was operated with synthetic wastewater to find operational parameters of internal recycle ratio and maximum MLSS showing best water quality and long-term stability. The internal recycle was defined as type 1 for aerobic to anoxic tank and type 2 for anoxic to anaerobic tank, respectively When the flux was maintained at $0.015\;m^3/m^2/hr$ (15 LMH) with 2Q type 1 internal recycle ratio, the optimal operational setting were 10 internal recycle ratio for type 2 and maximum MLSS of 11,000 mg/L among tested conditions. At this condition, removal efficiencies of BOD, CODcr, T-N and T-P showed $97.3\%,\;94.2\%,\;64.0\%,\;63.0\%$, respectively.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.261-273
• /
• 2011

Recently, the demands for steel frame are increasing because of the trend and due to the demand for bigger and higher buildings. In the analysis of typical steel frame, connections are based on the idealized fixed or pinned connection. A fixed connection assumes that the relative angle of each member before deformation is the same after the transformation. Therefore, the stiffener reinforces the connection to sufficient rigidity and stability of the panel zone. In the economical aspect, however, the necessity of connection that the stiffener reinforcement has omitted is increasing due to the excessive production as well as labor costs of connection. In contrast, pinned connection is assumed that bending moments between the beams and columns do not transfer to each member. This is easy to make in the plant and the construction is simple. However, the structural efficiency is reduced in pinned connection because connection cannot transfer moments. The introduction of this semirigid process can decide efficient cross-sectional dimensions that promote ease in the course of structural erection, as performed by members in the field-a call for safety in the entire frame. Therefore, foreign countries exert efforts to study the practical behavior and the results are applied to criterion. This paper analyzes the semirigid connection of domestic steel by design specifications of AISC/LRFD and make data bank that pertain to each steel. After wards, the results are compared to those of idealized connection; at the same time, this paper presents a design method that matches economic efficiency, end-fixity, and rotational stiffness.

• Culinary science and hospitality research
• /
• v.15 no.3
• /
• pp.344-355
• /
• 2009

This study is to set up a hypothesis and a research model based on how much the relational benefits can affect customer satisfaction and long-term relationship with the theoretical and practical results of established precedent researches, to analyze the structural equation model on casual dining restaurant diners, to evaluate the research model and subsequently to provide marketing implications. First of all, social and psychological factors prove to be influential among relational benefits felt by diners-out. Secondly, customer satisfaction has influence on long-term commitment for a restaurant. In other words, the higher customer satisfaction level for a restaurant is, the stronger willingness a customer has to recommend or revisit the restaurant, as several precedent studies support. As demonstrated in indirect advantages, these social and psychological benefits felt by diners-out have mighty effects on long-term relationship orientation, and satisfaction levels prove to be an important medium which can make these influences. As a result, restaurant employees' attitude toward customers is the most important factor rather than economic benefits such as reduced price, free gifts and coupons are, since customers put social and psychological benefits forward like intimate terms with restaurant workers, a sense of stability, and a relief from uneasiness. Therefore, constant service education should be done from the start to cope with customers' demands fast and flexibly and increase customer satisfaction.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.5
• /
• pp.20-28
• /
• 2016

A Ubiquitous City (U-city, Smart City) is one that ties information communications technologies (ICT) into many facets of city construction, thereby implicitly intending to function as a smart city that aims to be efficiently managed as well as provide an enhanced standard of living for its residents. Laws related to the construction of such ubiquitous cities point to integrated city management centers, intelligent facilities, and U-City infrastructure, among others, as central components of U-Cities, but do not provide a standard for these structures. Consequently, building of U-Cities by local governments are based on arbitrary judgments constrained the myriad of practical limitations that they face. Such ambiguity brings to light the need to find ways to improve the quality of these efforts. The first and second stages of this research examine the status of the components of a U-City -ubiquitous planning, technology, infrastructure, and services - and undertakes a comprehensive review thereof, with evaluation criteria formulated on the characteristics of stability, connectivity, goal-orientation, and development potential. In the research's third stage, a realistic and detailed evaluation index by which U-Cities can be renewed, demonstrated, and applied (???) is introduced in a step-by-step fashion, which will allow for local governments to properly assess the standard of their U-City in relation to the realities of the locality. Through the research result, it is expected that the index will become a part of the continued development and advancement of the "smart" character of an autonomous U-City at the local scale, and contribute to the overall revitalization of the U-City.

• Industry Promotion Research
• /
• v.5 no.1
• /
• pp.137-147
• /
• 2020

Social co-operatives, which are working positively to realize the economic and social purpose of being carried out directly through products and services producing the public interest, are steadily expanding under the public interest mission of social co-operatives. It has important theoretical and practical significance to study the model of social co-operatives tailored to the local situation in Korea based on international experience. This study looks at the international status of social co-operatives, international cases, and puts forward problems and suggestions centering on cases of advanced countries. It sought to find a solution to what society required only by solving the problems necessary for sustainable economic growth. In order to achieve the objectives of this study, the social cooperatives of advanced countries, such as Italy, Canada, and France, were organized, compared and analyzed. The study found that the implications of co-operatives in Italy, France and Canada are as follows. First, it is needed to adhere to the principles of co-operatives in pending issues such as social problems and employment and jobs in the community. Second, it is necessary to establish a supportive financial system for the cooperative's initial stability and sustainability. Third, the ecosystem of co-operatives should be formed to support and foster legal systems and network organizations.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.59-65
• /
• 2004

A stable reference voltage generator is necessary to the infrared image signal readout circuit(ROIC) to improve noise characteristics of signal originated from infrared devices, that is, to gain good images. In this paper, bandgap circuit operating at cryogenic temperature of 77K for Infrared image ROIC(readout integrated circuit) was first made. It demonstrates practical use possibility through taking measurements and estimations. Bandgap circuit is a representative voltage reference circuit. Most of bandgap reference circuits which are presented so far operate at room temperature, and their characteristic are not suitable for infrared image ROIC operating at liquid nitrogen temperature, 77K. To design bandgap circuit operating at cryogenic temperature, suitable circuit is selected and the parameter characteristics of used devices as temperature change are seen by a theoretical study and fitted at liquid temperature with considering such characteristics. This circuit has been fabricated in the Hynix 0.6um standard CMOS process, and the output voltage measured shows that the stability is 1.042±0.0015V over the temperature range of 60K to 110K and is better than bandgap circuits operated at room temperature.

• Journal of Korean Society of Forest Science
• /
• v.101 no.3
• /
• pp.412-425
• /
• 2012

Concrete Soil Erosion Control Dam, which blocks flow of debris flow in torrential stream, are reported to lose expected functions due to structural failure and collapses, caused by poor construction, material deterioration and external impacts. In this paper, an integrity assessment technique for debris barriers was proposed, which allows preliminary detection of problems inherent in debris barriers. The proposed integrity assessment technique is a non-destructive method based on SASW method, one of surface-wave tests. In this paper, a practical procedure and analysis guidelines in applying the SASW technique to debris barrier was proposed and its validity was verified using five decrepit debris barriers older than 20-year old. As a result, the SASW method was validated for the reliable grade evaluation method for concrete soil erosion control dam, and the resulting grades turned out to agree with the results determined by Sabang Associations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.45-55
• /
• 1986

This study proposes the explanatory indices of urban traffic for the purpose of solving the ambiguity of selection of the explanatory variables, which always raises problems in case of the travel-demand forecasting in the urban transportation planning, and develops optimal urban traffic generation models. The multiple regression models for objective traffic generation are developed by using the proposed explanatory inidces. Objective variables that can be explained by one explanatory variable are modified into simple regression type (Y=bX) in order to ensure the nonnegativity of traffic generation. Similarities are noted in the generaton characteristics of generated traffic from homogeneous land-use activity. Objective variables that can not be explained by multiple variable, such as trip attraction of school and trip generation of social-recreation, are classified by the characteristics of each zone. And traffic generation forecasting models are built as homogeneous zone group, the validity of each model being tested by a statistical method. It is desired that the forecasting precision is in improved by easy and simple method. Accordingly, trip generation rates are calculated from each land-use activity, and trip generation rates for practical application are proposed by considering their stability.

• Composites Research
• /
• v.23 no.4
• /
• pp.44-51
• /
• 2010

Recently, to solve the problems associated with the neutralization and corrosion of reinforced concrete compression members, the structural configurations such as CFFT (Concrete Filled GFRP Tube) and RCFFT (Reinforced Concrete Filled GFRR Tube) have been developed and applied to main members of civil engineering structure. These members can increase structural performance in terms of structural stability, ductility as well as chemical resistance compared with conventional concrete structural members. Many researches in numerous institutions to predict the load carrying capacity of the concrete compression member strengthened with FRP materials have been conducted and they have been suggested an equation for the prediction of the load carrying capacity of the members. Through the review of the research results, it was found that their results are similar each other. Moreover, it was also found that the results are not directly applicable to our specimens since the results are largely depended upon the member configurations. Also, since the accurate design criteria for the RC members strengthened with FRP such as RCFFT have not been established properly, relevant theoretical and experimental investigations must be conducted for the application to the practical structures. In this study, structural behavior of RCFFT was evaluated through compressive and quasi-static flexural tests in order to formulate design criteria for the structural design. In addition, the RCFFT members were also investigated to examine their confinement effect and the equations capable of estimating the compressive ultimate strength and flexural stiffness of the RCFFT members were proposed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1023-1035
• /
• 2016

Suspended sediment concentration (SSC) is a crucial riverine parameter in terms that it can be utilized for analyzing sediment transport, stability assessment of river and structure and so on. However, in case of domestic, sediment discharge data are not enough because of using conventional sediment samplers. This study aimed at developing a practical technique for estimating suspended sediment concentration in high spatial and temporal resolution by building relationship between acoustic backscatter (or SNR) from H-ADCP with actually observed data using LISST-100X. In this regard, a dedicated correction algorithm was proposed particularly for the adapted H-ADCP (SonTek SL-3000). Then, a SNR-SSC relation was built based upon a real-scale field experiment, where both H-ADCP and LISST-100X were concurrently operated to observe SNR and SSC, respectively. The coefficient of determination for the developed regression equation of SNR-SSC relation was around 0.85~0.88, thereby the relation could be evaluated to be highly correlated. The result of this study might be potentially applied for real-time and simultaneous observation of SSC when H-ADCP could be applied.