• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.263-266
• /
• 2001

In this paper, we investigated dielectric properies for BST thin films that was deposited on MgO/Si substrates using RF magnetron sputtering. In here, MgO film was used to perform that a diffusion b arrier between the BST film and Si substrate and a buffer layer to assist the BST film growth. A d eposition condition for MgO films was RF Power of 50W, substrate temperature of room temperature and the working gas ratio of Ar:O$_2$ were varied from 90:10 to 60:47. Finally we manufactured the cap acitor of Al/BST/MgO/Si/Al structure to know electrical properties of this capacitor through I-V, C-V measurement. In the results, C-V aha racteristic curves was shown a ferroelectric property so we measured P-E. A remanent poliazation and coerceive electric field was present 2$\mu$C/cm$^2$ and -27kV/cm respectively at Ar:O$_2$=90:10. And a va clue of dielectric constant was 86 at Ar:02=90:10.

• Membrane Journal
• /
• v.14 no.2
• /
• pp.142-148
• /
• 2004

This paper presents the enhancement of oxygen transfer efficiency using vibrating intravascular lung assist device (VIVLAD) for patients having chronic respiratory problems. The flow rate was controlled by the pump and monitored by a built-in flow meter. The vibration apparatus was composed of a piezo-actuator, a function generator, and a power amplifier. Gas flow rates of up to 6 L/min through the 120-cm-long hollow fibers have been achieved by exciting a piezo-actuator. The output PVDF sensor and FRF (frequency response function) were investigated by various frequency in VIVLAD. As a result, the maximum oxygen transfer rate was found to occur with maximum amplitude and the transfer of vibration to the hollow fiber membranes. It was excited by the frequency band of 35 Hz at various distilled water flow rates, and various module types.

• Convergence Security Journal
• /
• v.7 no.1
• /
• pp.35-43
• /
• 2007

The object of this paper is to design a biomedical signal measure systems based on sensor networks for the patient, integrated with computing technology. Using a combination of zigbee RF, embedded hardware and software technologies, as it allows the healthcare center to receive the information on emergency situations and the ordinary state of the patients individually or simultaneously, the healthcare center can copy with quickly a state of emergency and assist the normal life of the patient. In order to meet the low power and other requirements for the proposed system, we introduce a zigbee based RP which is the most suitable solution for improving the performance of our beeper system.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.5
• /
• pp.226-229
• /
• 2010

Many methods exist that promote wound healing, including light therapy, which consists of light beams that assist the human body in treating and sterilizing wounds, as well as regenerating cells. Irradiation with specific wavelengths of either laser or LED light has been shown to induce beneficial proliferation of fibroblasts that, depending on the size of the wound, can be effective in promoting wound healing. The experiments in this study utilized 8 week old 250~300 g Male Sprague Dawley Rats (ILAR Code: NTacSam:SD) and included a non-irradiation group and a 525 nm green LED irradiation group (n of each group = 7). In experiments animals were allowed to rest for 24 hours after wounds had been excised, which was followed by non- irradiation or 525 nm green LED irradiation therapy one hour per day for 9 days. Immunohistochemical staining was conducted for cytokeratin in order to precisely measure the defect size. In addition, Masson's trichrome staining was utilized in order to compare levels of collagen between the 525 nm green LED irradiation group and the non-irradiation group. Animals exposed to 525 nm green LED irradiation (p<0.05) healed at a faster rate and had increased collagenosis compared with the non-irradiated control group. Thus, treatment with 525 nm green LED irradiation had a beneficial effect on wound healing and should be considered as a possible alternative to low power laser treatment.

• The KSFM Journal of Fluid Machinery
• /
• v.4 no.4 s.13
• /
• pp.22-27
• /
• 2001

The pump/motor selection program for optimized selection of regional water supply facilities was developed based on a flowchart compiled from basic operational data, total head requirement, initial pump/motor specification selection etc. This program was developed in Visual Basic. The program accepts, as in the flowchart, operational requirements of pumps and other system requirements, and calculates specific speed based on flow rate, total head and rotational speed. Then the calculated specific speed is used to select pump types and speed prior to determining likelihood of cavitation occurring at the calculated NPSH. Power requirement is then calculated for safe operation of pump to assist final pump selection. Test results of the program match very closely to the design values of Paldang intake pump station(3rd stage) proving that the program can be used as an effective and practical aid for designing new regional water supply systems.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.171-176
• /
• 2001

The Pump/Motor Selection Program for optimized selection of regional water supply facilities was developed based on a flowchart compiled from basic operational data, total head requirement, initial pump/motor specification selection etc.. This program was developed in Visual Basic. The program accepts, as in the flowchart, operational requirements of pumps and other system requirements and calculates specific speed based on flow rate, total head and na Then the calculated specific speed is used to select pump types and rpm Prior to determining likelihood of cavitation occurring at the calculated NPSH. Power requirement is then calculated for safe operation of pump to assist final pump selection. Test results of the program matches very closely to the design values of Paldang intake pump station(3rd stage) proving that the program can be used as an effective and practical aid for designing new regional water supply systems.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.1
• /
• pp.1-9
• /
• 2015

This paper reviews trends of the rehabilitation welfare devices on the basis of products and markets. Latest assistive devices tend to have a fold function. Auxiliary power assist module has been added. The completion of products has been improved. The folding function has strong relationship with portability. Specifically, various mobility devices, including foldable devices, are associated with enhanced portability. Powered auxiliary wheels and upper extremity supporting modules have entered the market. The leading-edge technology like Segway's control technology applies to two-wheel wheelchairs. The brand- new technology, lower extremity robotic exoskeleton, applies to markets. Standing wheelchairs, ramps, stair climbing assistive devices becomes more common. In addition, a combination of a variety of smart devices is being promoted to the classical assistive devices' part. Rehabilitation welfare devices can be more valuable due to nice industrial design, improved materials, and processing technology.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.91-98
• /
• 2006

A light guide panel (LGP) is an element of the LCD back light unit, which is used for display devices. In this study, the laser marking process is applied to the fabrication of light guide panels as the new fabrication process. In order to obtain a light guide panel which has high luminance and uniformity, four principal parameters such as power, scanning speed, ratio of line gap, and number of line were selected. A Web-based design tool was developed to generate patterns of light guide panel at any location, and the tool may assist the designer to develop optimized patterns. Topcon-BM7 was used for luminance measurement of each specimen with $100mm{\times}100mm$ area. By Taguchi method optimized levels of each parameters were found, and luminance of $3523cd/cm^2$ and uniformity of 92% were achieved using the laser machined BLU.

• Korean Journal of Adult Nursing
• /
• v.18 no.4
• /
• pp.523-532
• /
• 2006

Purpose: The positive effects of health behaviors in older population are well recognized, but maintenance of health habits was more difficult than initiation. The purposes of the study were to identify predictors of health behavior based on motivation theories, and to analyze predicting power of motivational factors to explain health behaviors in older adults. Methods: The data were collected from older adults either institutionalized or living in the community. Total of 159 subjects with 72 years old in average were recruited for an interview. Hierarchical multiple regression analysis were utilized to analyze the data with age, residential type, and motivational variables. Results: The results of the multiple regression analysis showed that age and residential type explained 3% of variance in health behaviors (F=3.705, p=0.027). When motivational variables were entered, additional 56.9% of variance were explained by the model (F=33.275, p< 0.001). Among motivational variables, perceived benefits was the most important variable (${\beta}=0.346$, t=4.582, p<0.001), followed by self efficacy, emotional salience, and perceived barriers. Conclusion: Considering the importance of each motivational variable, the focus of intervention strategies to assist older adults to maintain health behaviors should be on modifiable and important motivational variables, such as self-efficacy, perceived benefits and barriers, and emotional salience.

• Journal of Biosystems Engineering
• /
• v.27 no.5
• /
• pp.417-424
• /
• 2002

This study was conducted to develop a vehicle, leading or following a worker at a certain distance to assist laborious transporting works in greenhouses. A prototype vehicle was tested in the practical field conditions using a developed control algorithm. Results of this study were summarized as following: 1. The sensing device consisted of infrared sensors was attached to the front of the vehicle and turning following algorithm was developed to make the vehicle turned as it follows a worker simultaneously. 2. The measured average power consumptions were 110W and 89W, equivalent to 5.2-6.4 hrs battery durations, at low speed with and without the maximum payload, respectively. 3. Results of the travel tests showed that the deviations from the center of row spacing were $\pm$100 mm along the ridge and $\pm$85 mm along the hydroponic bed in the greenhouse. Therefore, the worker-following transport vehicle was feasible to travel along the row without collision in the greenhouse.