• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1114-1115
• /
• 2006

The preparation of single-phase $CuLaO_2$ with delafossite-type structure by means of the solid-state reaction method was investigated using X-ray diffraction. The results showed that notwhistanding the fact that there was a trace of metallic copper, nearly single-phase $CuLaO_2$ was obtained by using $La(OH)_3$ as a lanthanum source and by firing the mixed powder with nonstoichiometric composition ratio of $La(OH)_3:Cu_2O=1:1.425$ in a vacuum at 1273 K for 10 h. The measurement of electrical conductivity and Seebeck coefficient showed that $CuLaO_2$ thus obtained was a p-type semiconductor and had a Seebeck coefficient of approximately $70{\mu}V/K$.

• Journal of Powder Materials
• /
• v.12 no.1
• /
• pp.17-23
• /
• 2005

Dense $WSi_2$-20vol.%SiC composite was synthesized by high-frequency induction-heated combustion synthesis(HFIHCS) method within 2 minutes in one step from elemental powder mixture of W, Si and C. Simultaneous combustion synthesis and densification were accomplished under the combined effects of an induced current and mechanical pressure. Highly dense $WSi_2$-20vol.%SiC with relative density of up to 97% was produced under simultaneous application of 60MPa pressure and the induced current. The average grain size of $WSi_2$ was about $5.2{\mu}m$. The hardness and fracture toughness values obtained were 1700kg/$mm^2$ and $4.4MPa{\cdot}m^{1/2}$, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.4
• /
• pp.607-616
• /
• 2019

In this study, functionalized poplar powder (FPP) was used as a support material for the immobilization of enoate reductase (ER) and glucose-6-phosphate dehydrogenase (GDH) by covalent binding. Under optimal conditions, the immobilization efficiency of ER-FPP and GDH-FPP was 95.1% and 84.7%, and the activity recovery of ER and GDH was 47.5% and 37.8%, respectively. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) analysis indicated that FPP was a suitable carrier for enzyme immobilization. ER-FPP and GDH-FPP exhibit excellent thermal stabilities and superior reusability. Especially, ER-FPP and GDH-FPP enable the continuous conversion of 4-(4-Methoxyphenyl)-3-buten-2-one with $NAD^+$ recycling. While the immobilization strategies established here were simple and inexpensive, they exploited a new method for the immobilization and application of ER and its cofactor recycling system.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.613-616
• /
• 2003

Effect on hydrothermal treatment of lamellar vanadium oxides was investigated and the formation of hexagonal and cubic mesophase was found. This lamellar materials were prepared by mixing of cetyltrimethylammonium-bromide and pH-controlled sodium metavanadate solution. Thermal method and UV/O₃treatment were applied to extract organic template. The structure of resulting product was studied by powder X-ray diffraction and transmission electron microscopy (TEM).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.176-181
• /
• 2009

In this work, a new type of DSCs based on nanoporous FTO structure is being developed for research aimed at low-cost high-efficiency solar cell application. The nanoporous FTO materials have been prepared through the sol-gel combustion method followed by thermal treatment at $450{\sim}850[^{\circ}C]$. The properties of the nanoporous FTO materials were investigated by IR spectra, BET and TEM analyses, and the photovoltaic performance of the prepared DSCs were examined. It can be seen from the result that the nanoporous FTO exhibited good transparent conductive properties, well suited for DSCs application.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.5
• /
• pp.664-667
• /
• 2000

Objective : Excessive bleeding from the exposed cancellous bone surface may cause serious problem such as hematoma formation, infection, transfusion reaction during operation and postoperative period. There are several kinds of bleeding control agent on the cancellous bone surface including bone wax, gelatin sponge ($Gelfoam^{(R)}$), oxidized cellulose($Oxycel^{(R)}$, $Surgicel^{(R)}$), thrombin, microfibrillar collagen($Avitene^{(R)}$) etc. In the past, bone wax was used to control bone bleeding but it is associated with increased infection rate and fusion failure. Recently, gelfoam paste has been used to control cancellous bone bleeding. We controlled the cancellous bone bleeding with the mixture of gelfoam powder and thrombin powder. Material and Methods : Seventeen patients of posterior fusion on the 4 motion segments of thoracolumbar spine were selected to compare the result of bone bleeding control. In the test group of 9 patients, the cancellous bone bleeding was controlled with the mixture of Gelfoam and thrombin powder during operation. In the control group of 8 cases, no chemical hemostatic agent was used to manage the bone bleeding during operation. We calculated the total amount of bleeding from cancellous bone surface during and after operation in the two groups and compared their statistic significance of the result which was judged by student t-test. Results : The average amount of intraoperative bleeding was 1825ml in control group, 811ml in test group(p<0.01). The amount of postoperative bleeding was 943ml in control group and 812ml in test group, there were no significant difference in the amount of bleeding during postoperative period between two groups(p>0.5). Total amount of blood was decreased in as much as 1150ml in test group(p<0.01). Conclusion : We concluded that the application of the mixture of thrombin and gelfoam powder on the cancellous bone surface is the effective control method of cancellous bone bleeding for multilevel posterior spinal fusion.

• Journal of Ceramic Processing Research
• /
• v.20 no.spc1
• /
• pp.109-112
• /
• 2019

γ-dicalcium silicate(γ-C2S) is known as a polymorphism of belite. Due to its high CO2 fixed capacity and the low CO2 emission production process, γ-C2S has attracted more and more attention of researchers. For the further development of application of γ-C2S in building construction industry. In this study, we aim to investigate the method for synthesizing high purity of γ-C2S. The influence of different raw materials and calcination temperatures on the purity of γ-C2S was also evaluated. Several Ca bearing materials were selected as the calcium source, the materials which' s main component is SiO2 were used as the silicon source. Raw materials were mixed and were calcined under different temperatures. The results reveal that the highest purity could be obtained using Ca(OH)2 and SiO2 powder as raw materials. And for the practical application, a relatively economic synthesis method using natural mineral materials- limestone and silica sand as raw materials was developed, by this method, the purity of the synthetic γ-C2S was 77.6%.

• Journal of Welding and Joining
• /
• v.30 no.6
• /
• pp.92-97
• /
• 2012

Using the pulsed current activated sintering method, the WC-10wt.% Co materials were densified using a WC and Co powder. The WC-Co almost completely dense with a relative density of up to 99.5 % after the simultaneous application of a pressure of 60 MPa and an electric current for 3 minutes almost without any significant change in the grain size. The average grain size of about $0.3{\mu}m$. The hardness and fracture toughness at $1000^{\circ}C$ were about $2200kg/mm^2$ and $9.8MPa.m^{1/2}$, respectively.

• Korean Journal of Materials Research
• /
• v.24 no.12
• /
• pp.700-703
• /
• 2014

Calcium phosphate minerals are biologically important because of their application in the fields of orthopaedics and dentistry. Herein we have tried to synthesize calcium phosphate minerals from biowaste clam shells. A simple microwave method was used to synthesize a mixture of calcium phosphate minerals such as hydroxyapatite, tri-calcium phosphate, and monetite. The microwave induces vibration of the dipole ions in the reagent. The heating and rearrangement of ions and atoms occurs during the process. The phases obtained in the final powder were ascertained by X-ray diffraction; the morphology of each sample was checked using a scanning electron microscope. We were able to obtain a mixture of calcium phosphate minerals using the microwave method; the calcined powder showed a brick like morphology, which is different from the rod shape morphology of the hydroxyapatite obtained using the hydrothermal process.

• Journal of Powder Materials
• /
• v.18 no.1
• /
• pp.56-63
• /
• 2011

Recently, $TiO_2$ nanotubes have considerably researched because of their novel application about photocatalysis, dye-sensitized solar cells (DSSCs), lithium ion battery, etc. In this work, self-standing $TiO_2$ nanotube arrays were fabricated by anodic oxidation method using pure Ti foil as a working electrode in ethylene glycole with 0.3M $NH_4F$ + $2%H_2O$. Growth behavior of $TiO_2$ nanotube arrays was compared according to temperature, voltage and time. The morphology, structure and crystalline of anodized $TiO_2$ nanotube arrays were observed by FE-SEM (field emission scanning electron microscope) and XRD (X-ray diffraction).