• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.9-18
• /
• 2014

London Convention on the prevention of marine pollution by dumping of wastes and other matter prohibits the deliberate disposal of paper mill sludges at sea. In order to explore the alternative plan on the prohibition of sludge disposal at sea, the biodegradable seedling pot was developed by mixing the sludge with old newspaper (ONP) in appropriate mixing ratios. The C/N ratio of the mixed sludge was below 20, leading to rapid deterioration of the organic matters composing the seedling pot. The increased ONP contents in the seedling pot resulted in the increase of pot thickness and thereafter in the decrease of pot density. Cellulose fibers in ONP promoted water absorption of the pot but AKD addition helped the seedling pot to repel water during raising seedling. Breaking length and burst strength of the seedling pot were improved by addition of wet strength additives but air permeability was a little diminished. Biodegradable rate of the seedling pot in a soil was accelerated by the attack of soil microbes at the beginning, and finally the pot was completely degraded in 150 days in a soil.

• Corrosion Science and Technology
• /
• v.11 no.3
• /
• pp.71-76
• /
• 2012

Computational fluid dynamics (CFD) is nowadays a powerful and reliable tool for simulating different flow processes and temperature. CFD is used to analyze the various pot geometries and operative variables in 55% Al-Zn pot of CGL. In this research, different strip velocities were assumed and then shown the flow pattern in the pot that was similar in the different strip velocities. Temperature distribution in the pot depended on inductors and inlet strip temperature at the steady condition. Generation of dross particles and transport models were considered to describe dross particles evolution inside the pot. In order to observe dross influence by scrap location, dross particles were generated upon the sink roll. Floating time of dross particles is different by scraper locations above the sink roll.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.1
• /
• pp.1-9
• /
• 2012

For the optimal design of a shrimp pot to control the catch size and to reduce catch the small size shrimp, tank experiments were carried out to study the pot stability under water. Tank experiments were carried out to measure the drag with 4 kinds of model pots that have 50% selection on the individual of 25mm carapace length. The drag of each pot was measured every 10 times with changing the current speeds from 0.1m/s to 0.7m/s in 0.1m/s intervals and the pot attack angle from $0^{\circ}$ to $90^{\circ}$ in $15^{\circ}$ interval in a flume tank. The relation between the current speed and drag was presented. The stability of pot was estimated using the drag data and the friction data of Kim et al. (2008b). The results showed that, the drag was shown lower as small as the projected area of pot depending on the current speeds and angles. The model pots were showed to slide on the seabed in case of rock at the current speeds 0.35-0.38m/s and the possibility of turn over at the current speeds 0.77-0.89m/s. In conclusion, the stability of a shrimp pot showed more stable as the pot of the lower the height and the smaller projected area on current.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.1
• /
• pp.37-44
• /
• 2020

The change of fishing power index was analyzed to identify the development of the vessel and gear technology that may improve the fishing efficiency of the offshore conger eel pot fishery from 1980s to 2015. Gross tonnage per fishing vessel was rapidly increased annually. The standard of pot was maintained, but the number of pot used rapidly increased by using conger eel pot hauling devices, carrying and loading devices, main line hauler, casting devices and slide type pot. Fish finder system to identify fishing ground information and the conger eel pot hauling devices were modernized, and supply rate was also increased. Therefore, the relative fishing power index in the offshore conger eel pot fishery increased from 1.0 in 1980 to 1.3 in 1990, to 1.8 in 2000 and to 2.0 in 2015. The results are expected to contribute to reasonable fisheries stock management of the offshore conger eel pot fishery.

• Journal of Bio-Environment Control
• /
• v.19 no.2
• /
• pp.82-87
• /
• 2010

To investigate effects of kind of pot for raising of seedling (single plastic pot, double plastic pot, circular peat pot, square peat pot) and planting method of the pot (3/3, 2/3, and 1/3 by the buried degree of pot height) on watermelon (Citrullus lanatus) growth, this research was conducted under plastic film house. Since planting of seedlings, number, area and photosynthesis rate of leaves, plant height and weight were superior in seedling grown in double plastic pot than those grown in the others. In fruit characteristics harvested at 12 weeks after planting, fruit height, diameter and weight were longer in double plastic pot than in the others, also fruit peel thickness and hilum diameter were thicker and shorter. Initial growth of the plant after planting with seedling grown in double plastic pot was superior in method buried the 2/3 degree of the pot height than the other methods.

• Korean Journal of Organic Agriculture
• /
• v.19 no.spc
• /
• pp.135-138
• /
• 2011

In traditional organic rice culture practices, control of weeds is a big problem. This study was conducted to increase the rice production. Results showed that Plant height, SPAD, root length and weight were higher in pot raised seedling than broadcasting method except number of panicles. High plant density caused reduction in plant height, number of culm and chlorophyll content of the rice. No lodging was observed in both methods. Thickness of third internode and culm length was more in pot raised seedlings at both sites. When organic material was used rice yield increased by 3.81%. Higher rice production (10%) was recorded in the fields planted with pot raised seedlings. From the above study it could be conclude that the pot raised seedlings perform better than the seedlings raised by broadcasting methods.

• Journal of the Korean Chemical Society
• /
• v.52 no.1
• /
• pp.47-51
• /
• 2008

A simple synthetic strategy is described for one-pot synthesis of 5,7-diaryl-4,4-dimethyl-4,5,6,7-tetrahydropyridino[3,4-d]-1,2,3-selenadiazoles (11-15) in the presence of NaHSO4.SiO2 as a heterogeneous catalyst in dry media under microwave irradiation.Key words: One-pot synthesis, 3,3-Dimethyl-2,6-diarylpiperidin-4-one; 1,2,3-Selenadiazoles; Selenium dioxide; NaHSO4.SiO2 Heterogeneous catalyst.

• Horticultural Science & Technology
• /
• v.18 no.1
• /
• pp.28-32
• /
• 2000

This study was carried out to investigate the effects of uniconazole treatment on the growth and flowering of potted Chrysanthemum indicum L. for high quality pot plant production. Uniconazole was drenched at 0.05, 0.01, or 0.15 mg a.i./pot at 14 days after planting (DAP) of rooted cuttings. Simultaneously the short-day treatment (SDT) and pinching were adapted. The same amount of uniconazole (0.05 mg a.i./pot) was spilt drenched at once, twice, and three times, respectively, at 1 week interval. Uniconazole markedly reduced plant height, branch length, and stem diameter. Plant height was reduced linearly with increasing uniconazole concentration at 0.05, 0.01, or 0.15 mg a.i./pot up-to 41.6%, 52.5%, and 58.5%, respectively. In 0.05 mg a.i./pot, the number of branches greatly increased and plant height of 22.6 cm was adequate for pot plant. However, higher concentrations (0.10, 0.15 mg a.i.) were not suitable for production of high quality pot plant (17.0, 14.8 cm, respectively). Pinching and SDT decreased the number of days to visible bud, while uniconazole treatments delayed days to visible bud by 5-9 days compared with pinching and SDT. Number of visible buds was highest at 0.05 mg a.i./pot uniconazole treatment. However, flower diameter was decreased by uniconazole treatment, resulting in compact form. Number of stomata was increased by uniconazole treatment. The length of vascular tissues of uniconazole-treated plants ($11.2{\mu}m$) was smaller than that of non-treated plants ($15.0{\mu}m$, and the size of xylem vessel was also decreased. Uniconazole treatment at 0.05 mg a.i./pot at 14 DAP with pinching and SDT were recommended for pot plant production of C. indicum L.

• Asian Journal of Turfgrass Science
• /
• v.19 no.1
• /
• pp.17-25
• /
• 2005

Pathogenicity of entomopathogenic nematde, Steinernema carpocapsae Pocheon strain (ScP) was evaluated against different larval stages(2nd, 3-4th and 5th) of Anomis commode and Anomis mesogona(Lepidoptera: Noctuidae) in petri dish and pot. The $LC_{50}$ values were increased in proportion to larval stage of A. commoda and A. mesogona. $LC_{50}$ value of ScP against 2nd instar of A. commoda and A. mesogona was 9.7 and 4.5, respectively. The 2nd instar of both species was also susceptible to ScP in pot test. That is, mortality of 2nd instar of A. commode and A. mesogona was higher representing $72.5\%\;and\;87.5\%$ 5 days later after treatment, respectively, when ScP was applied at the ,ate of 90,000 infective juveniles(Ijs) per $pot(=1\times10^9\;Ijs/ha)$. However, susceptibility was decreased from 3rd instar. Mortality of 5th instar of A. commoda and A. mesogona was $5.0\%\;and\;10.0\%$, respectively, at the rate of 90,000 Ijs/pot. When ScP was applied into pot including mixed larval stages from 2nd to 5th instar(10 larvae far 2nd instar, 10 larvae for 3rd - 4th instars, and 10 larvae for 5th instar) at the rate of 90,000 Ijs/pot, mortality of A. commoda and A. mesogona was $69.2\%\;and\;50.0\%$, respectively.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.2
• /
• pp.141-149
• /
• 1975

Silkworm is known to be damaged under the unfavorable environmental conditions. Recently, it has been often argued that nicotine is a main factor to affect the silkworm nutritional balance and to result in decrease of quantitative characters, and unbalance of larval nutrition. Especially in spring season, there is tendency to produce nicotine damage to silkworm fed with the mulberry leaf near to tobacco field early cultivated in mulching system. In these connections, the trial was made in the different pots placing by the different distance 10rn, 20m, 40m, and 60m in the direction of east-north from the tobacco field. Location of pot near to the tobacco fold is 40m below the tobacco Held and gradually higher than the tobacco field by 10 degree of slope. In addition, when the mulberry field is divided into two areas from the east-south to west-north, southern east zone is lowering down below 10 degree of slope and has 36％ of east-south wind, 21％ of south-east wind and 16％ of south wind, etc. Pots are left on the mulberry field from the completion of lower part leaf harvest to just before upper part leaf harvest is completed for 32 days. Then silkworm at 4th-5th stage was fed with the leaf grown during the period and larval characters are statistically analyzed. The results are summarized as follows： 1. 10-40m distant pot statistically at the same level has the longest larval duration and 60m distant pot is. not significant at 5％ level. Whole larval duration has same tendency as in the 5th larval duration. 2. Percentage of delayed molting larvae at the 5th stage is increased in 10m distant pot and there is no significance statistically in other pots, as compared with that of control. 3. It is not showed that there is no damage to mortality of the old larvae in 60m distant pot. 4. 10-20m distant pot produces a low pupation and others are at the same level statistically at 5％ significance, 5. It is showed that nicotine damage is occurred in single cocoon freight and cocoon shell weight up to 60m distant pot, rather higher damage in cocoon shell weight than in single cocoon weight. 6. It is showed that cocoon yield from 10, 000 molted larvae including double cocoon is decreased up to 40m distant pot far from the tobacco field in which 40％ of cocoon yield in 10m distant pot by 7kg, 26％ of cocoon yield in 20m distant pot by 3.9kg, 24％ of cocoon yield in 40m distant pot by 3.6kg, and 12％ of cocoon yield in 60m distant pot by 1.8kg, as compared with control. However, there is no significance statistically at 5％ level in 60m distant pot. With these above results, it is concluded that nicotine da mage could be occurred in cocoon yield and cocoon quality up to 60m distant far from the tobacco field.