• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제39권4호
• /
• pp.188-192
• /
• 2013

Post-traumatic anterior open bite can occur as a result of broken balance among the masticatory muscles. The superior hyoid muscle group retracts the mandible downward and contributes to the anterior open bite. Denervation of the digastric muscle by injection of botulinum toxin type A (BTX-A) can reduce the power of the digastric muscle and help to resolve the post-traumatic anterior open bite. A patient with a bilateral angle fracture had an anterior open bite even after undergoing three operations under general anesthesia and rubber traction. Although the open bite showed some improvement by the repeated operation, the occlusion was still unstable six weeks after the initial treatment. To eliminate the residual anterior open bite, BTX-A was injected into the anterior belly of the digastric muscle. Following injection of BTX-A, the anterior open bite showed immediate improvement. Complication and relapse were not observed during follow-up. Long-standing post-traumatic open bite could be successfully corrected by injection of BTX-A into the anterior belly of the digastric muscle without complication.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제17권1호
• /
• pp.47-53
• /
• 2017

Background: Every patient who undergoes mandibular third molar surgery is concerned about post-operative pain. Indeed, previous researchers have used various methods to treat such pain. This study aimed to assess the effectiveness of sublingual injection of dexamethasone (8 mg) to treat post-operative pain after mandibular third molar surgery. Method: This was a randomized, double-blind, split-mouth, clinical trial, involving 48 healthy patients who required surgical removal of two mandibular third molars with similar bilateral positions. All operations were performed by the same experienced surgeon. The patients were randomized into a study group (8 mg dexamethasone injection) and a placebo group (normal saline injection). Both interventions were injected into the sublingual space immediately after local anesthesia, 30 min before the first incision. The study group received an 8 mg dexamethasone injection, while the placebo group received a normal saline injection. The wash period between the patients' two operations was 3 to 4 weeks. Pain was assessed by recording the number of analgesic tablets (rescue drug) consumed, as well as by noting the patients' responses to the visual analog scale (VAS) on the first, second, and third days after surgery. Results: The study group differed significantly from the placebo group in terms of VAS score and analgesic consumption. Conclusion: Dexamethasone (8 mg), injected sublingually, significantly eased post-operative pain after surgical removal of the mandibular third molar.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권4호
• /
• pp.418-424
• /
• 2015

국제해사기구 해양환경보호위원회는 2016년 1월 1일부터 배출통제지역을 통항하는 선박에 대해서 Tier III를 적용하여 질소산화물 배출 규제를 더욱 강화하기로 결정하였다. 본 논문에서는 질소산화물 배출 저감을 위한 연구의 일환으로 한국해양대학교 실습선 한바다호를 이용하여 실제 운항 중에 주기관을 단일분사와 이단지연분사의 두 가지 조건으로 운전하여 부하별 배기가스, 실린더 압력, 연료소모량 등을 계측하였다. 그 결과 두 가지 운전조건 모두 엔진의 부하가 증가할수록 질소산화물과 이산화탄소 배출량도 함께 증가하는 경향을 보였으며, 일산화탄소의 농도는 감소하였다. 또한 이단지연분사 시에는 최대폭발압력이 약 10% 이상 감소하였고, 이로 인해 배기가스 내 질소산화물의 농도는 약 25~30% 정도 감소하였다. 하지만 질소산화물 배출 저감의 긍정적인 결과에 반하여 연료소비율이 약 3~5% 정도 증가하는 상반관계가 확인되었다.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.423.2-424
• /
• 2002

The present study evaluates the pharmacokinetics and tissue distribution of GX-12, a multiple plasmid DNA vaccine for the treatment of HIV-1 infection. PCR analysis after i.v. injection in mice showed that plasmid DNA was rapidly degraded in blood with a half-life of 1.34 min and was no longer detectable at 90 min post-injection. Plasmid DNA concentration also rapidly declined at the injection site after i.m. injection. with less than 1 % of the initial concentration remaining at 90 min post-injection. (omitted)

• Asian-Australasian Journal of Animal Sciences
• /
• 제3권4호
• /
• pp.343-346
• /
• 1990

A study was conducted to determine the effect of prostaglandin $F_2$ alpha ($PGF_2$ alpha) on the reaction time and seminal characteristics of buffalo bulls. Semen was collected from three Murrah bulls in three periods: pre-treatment, treatment and post-treatment. During the treatment period each bull was administered 2 ml $PGF_2$ alpha (Synchrocept, Fenprostalene) im, 1 hour prior to semen collection. In the post-treatment, semen was collected 7 days after the last injection of $PGF_2$. Semen samples were evaluated immediately after collection. Pre-collection injection of $PGF_2$ alpha has no significant effect on reaction time, semen volume, percentage motility, sperm concentration and total number of sperms per ejaculate. Fluctuations in semen color and consistency were observed. There is a significant (p<0.05) increase in the mean percentage of normal spermatozoa during the treatment and post treatment periods. Likewise, administration of PG results into a significant (p<0.05) rise on the average percentage of live sperms but this effect was not manifested in the post-treatment period. Improvement in mass activity was observed during the treatment and post-treatment periods.

• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.35-40
• /
• 2010

We have investigated the effects of hydrogen injection via in-situ gas addition ($O_2$, $H_2$, or $O_2$ + $H_2$ gas) and plasma post-treatment (Ar or Ar + H plasma) on material properties of ZnO that is considered to be as a channel layer in transparent thin film transistors. The variations in the electrical resistivity, optical transmittance and bandgap energy, and crystal quality of ZnO thin films were characterized in terms of the methods and conditions used in hydrogen injection. The resistivity was significantly decreased by injection of hydrogen; approximately $10^6\;{\Omega}cm$ for as-grown, $1.2\;{\times}\;10^2\;{\Omega}cm$ for in-situ with $O_2/H_2\;=\;2/3$ addition, and $0.1\;{\Omega}cm$ after Ar + H plasma treatment of 90 min. The average transmittance of ZnO films measured at a wavelength of 400-700 nm was gradually increased by increasing the post-treatment time in Ar + H plasma. The optical bandgap energy of ZnO films was almost monotonically increased by decreasing the $O_2/H_2$ ratio in in-situ gas addition or by increasing the post-treatment time in Ar + H plasma, while the post-treatment using Ar plasma hardly affected the bandgap energy. The role of hydrogen in ZnO was discussed by considering the creation and annihilation of oxygen vacancies as well as the formation of shallow donors by hydrogen.

• 한국동물생명공학회지
• /
• 제35권1호
• /
• pp.50-57
• /
• 2020

The objective of this research work was to know ovarian dynamics and pregnancy rate of cyclic Murrah buffalo cows with induced estrus by administration of prostaglandin F2α (PGF2α) and timed artificial insemination (TAI) with frozen thawed semen. A total of 31 female buffaloes were selected for the study. The buffalos having matured CL observed by ultrasonography were given one intra muscular injection of cloprostenol 500 ㎍ and TAI was performed using frozen thawed semen of Indian Murrah buffalo bull. Results showed that 90.32% (significantly, at p < 0.05) cows explore the sign of heat after injection of PG and 67.85% (significantly, at p < 0.05) cows were become pregnant out of 28 inseminated (TAI) cows. In the 28 inseminated (TAI) cows, average number of smaller and larger size of follicles were non-significantly (p > 0.05) higher at day 3 post PG injection, but the medium size of follicles was nonsignificantly (p > 0.05) higher at PG injection. At day 3 post PG injection the diameter of follicles was significantly (p < 0.05) higher, but the diameter of CL was significantly (p < 0.01) lower compared at PG injection. At PG injection the diameter of largest follicle was non-significantly differences (p > 0.05) in between pregnant and non-pregnant cows. But at day 3 post PG injection it was significantly (p < 0.01) higher in pregnant cows compared to non-pregnant cows. The number of small, medium, and large follicles at PG injection and at day 3 post PG injection were non-significantly (p > 0.05) difference in between pregnant and non-pregnant buffalo cows. Finally, it is concluded that the CL was effectively regresses and induced the sign of heat in buffalo cows and after AI the cows were become pregnant with significant rate. The study will help to the veterinarian and researcher to know the efficacy of PG injection and AI for reproductive efficiency in buffalo cows.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.12-16
• /
• 2012

In this study, an injection mold is made to produce polymer line post insulators. FRP (fiber reinforced plastics) is covered by silicone housing. In injection molding process, chances for offcenter are 60 percent. Given the structure of the product, offcenter occurs owing to the imbalances in positions of gates and improper -designs of cores and jigs. This study focuses on mold modifications and improvements.

• 한국어병학회지
• /
• 제16권3호
• /
• pp.139-146
• /
• 2003

We have investigated the biological effects of recombinant IL-1$\beta$ (rIL-1$\beta$) on the expression of antiviral genes such as Myxovirus-3 (MX-3) and Interferon regulating factor-1 (IRF-1), which are related to type I interferon. When ten micrograms of rIL-1$\beta$ were treated, we observed the stimulatory effect on the expression of these antiviral genes. Interestingly, at the early stage of stimulation, these genes were down-regulated and then up-regulated by the results obtained that the expressions of these genes were decreased at day 1 post-injection and gradually increased at day 3 post-injection. Thus, the stimulatory effect of rIL-1$\beta$ on the expression of MX-3 and IRF-3 gene might be an indirect stimulatory effect because significant up-regulation was delayed until day 3 post-injection.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.621-626
• /
• 2001

Microcellular foaming process was developed at MIT in 1980's to save a quantity of raw materials and improve mechanical properties. There are many process variables in appling microcellular foaming process to the conventional injection molding process. Of all process variables, part dimension control and shrinkage are the most influential on the post molded dimension. The post molding dimensional change of thermoplastic resins is important to tool designers for predicting the specific difference of molded part vs. actual mold cavity. Generally, articles injection molded are smaller in size than the cavity; hence, the term shrinkage factor is used to define the allowance a designer specifies. It is important to consider the factors that influence molded part dimension. According to ASTM Designation: D 955, shrinkage from mold dimensions of molded plastics was measured. In injection molding, the difference between the dimensions of the mold and of the molded article produced therein from a given material may vary according to the design and operation of the mold. In this paper, shrinkage data of molded plastic parts was obtained. It can be an important information for designing optimum mold system in a microcellular foaming injection molding process.