Design & Manufacturing

  • 제6권2호
  • /
  • Pages.12-16
  • /
  • 2012
  • /
  • 2800-0323(pISSN)
  • /
  • 2733-452X(eISSN)
한국금형공학회 (Korean Society of Die & Mold Engineering)
권호 표지

배전용 폴리머 라인 포스트 애자 금형의 불량과 대책에 관한 연구

A study on the defects of molds for distribution polymer line post insulators and problem-solving measures

  • 김세환 (공주대학교 금형설계공학과) ;
  • 최계광 (공주대학교 금형설계공학과)
  • Kim, Sei-hwan (Department of Metal Mold Design Engineering, Kongju National University) ;
  • Choi, Kye-kwang (Department of Metal Mold Design Engineering, Kongju National University)
  • 투고 : 2012.07.12
  • 심사 : 2012.11.23
  • 발행 : 2012.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, an injection mold is made to produce polymer line post insulators. FRP (fiber reinforced plastics) is covered by silicone housing. In injection molding process, chances for offcenter are 60 percent. Given the structure of the product, offcenter occurs owing to the imbalances in positions of gates and improper -designs of cores and jigs. This study focuses on mold modifications and improvements.

키워드