• 한국안전학회지
• /
• 제30권1호
• /
• pp.8-13
• /
• 2015

The experimental design methodology was applied in the drop tube furnace (DTF) to predict the various combustion properties according to the operating conditions and to assess the coal plant safety. Response surface method (RSM) was introduced as a design of experiment, and the database for RSM was set with the numerical simulation of DTF. The dependent variables such as burnout ratios (BOR) of coal and $CO/CO_2$ ratios were mathematically described as a function of three independent variables (coal particle size, carrier gas flow rate, wall temperature) being modeled by the use of the central composite design (CCD), and evaluated using a second-order polynomial multiple regression model. The prediction of BOR showed a high coefficient of determination (R2) value, thus ensuring a satisfactory adjustment of the second-order polynomial multiple regression model with the simulation data. However, $CO/CO_2$ ratio had a big difference between calculated values and predicted values using conventional RSM, which might be mainly due to the dependent variable increses or decrease very steeply, and hence the second order polynomial cannot follow the rates. To relax the increasing rate of dependent variable, $CO/CO_2$ ratio was taken as common logarithms and worked again with RSM. The application of logarithms in the transformation of dependent variables showed that the accuracy was highly enhanced and predicted the simulation data well.

• Asia pacific journal of information systems
• /
• 제16권2호
• /
• pp.47-67
• /
• 2006

This study takes a quantitative approach to the influence of TTF (Task-Technology Fit) on the individual's use and performance of GSS (Group Support Systems), while traditional studies on TTF have taken the experimental approach to explore the characteristic fit between diverse tasks and technologies. We have the following two research inquires: Are the IS use and performance maximized when information technologies are provided by the exact amount of demand?; and, Does TTF at the high level between task and IT produce better IS use (or performance) than at the low level? To investigate these issues, we use the polynomial regression analysis and response surface methodology of Edwards (1993) instead of traditional direct measure of TTF. This method measures the degree of desired and actual level of information technologies in conducting tasks, and traces the dynamic changes of dependent variables (IS use and performance) according to the variances of each independent variable. Our results conclude that user's IS use and performance are maximized when information technologies are actually provided by no more or less than the desired level. We also found that TTF at the high level promotes better IS use and performance than TTF at the low level.

• 한국위성정보통신학회논문지
• /
• 제12권2호
• /
• pp.42-45
• /
• 2017

전력선통신 시스템에서는 전력망을 활용한 통신 방식을 사용하기 때문에 일반적 통신선로를 활용한 통신 방식에 비해 잡음이 많고, 이것으로 인한 성능 저하가 문제가 되고 있다. 이러한 잡음으로 인한 성능 저하를 완화시키기 위해, 본 논문에서는 전력선통신 시스템에서의 임펄스 잡음 환경에서 신호를 검출하는 인공지능 알고리즘을 제안한다. 다항식 회귀법을 이용하여 임펄스 잡음 신호의 원신호를 예측하고, 시뮬레이션 결과를 통해 본 논문에서 제안한 인공지능 알고리즘을 적용한 전력선통신 시스템에서 임펄스 잡음 환경내 신호 검출 성능 향상을 입증한다.

• 한국기계가공학회지
• /
• 제18권8호
• /
• pp.82-90
• /
• 2019

We propose an equivalent model of a sintered metal mesh filter calculated by Ergun's equation and polynomial regression for the CFD analysis of breakaway devices at a hydrogen fueling station. CFD analysis of filters that cause high pressure loss is essential because breakaway devices in high-pressure hydrogen conditions require low pressure loss. A differential pressure experiment with a filter was performed in a low-pressure air condition considering similarities. An equivalent model was developed by deriving the resistance value by the polynomial regression using the experimental results. The results of CFD analysis using the equivalent model show that there was almost no error in the operating condition of the breakaway device compared to the experimental results. Through this work, we believe that the proposed equivalent model of a filter can be applied to the analysis of breakaway devices in hydrogen fueling stations. We will study how to optimize the shape and position of the filter in breakaway devices using the developed equivalent model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.337-339
• /
• 2004

In this paper, we discuss optimal design of Fuzzy Polynomial Neural Networks by means of Genetic Algorithms(GAs). Proceeding the layer, this model creates the optimal network architecture through the selection and the elimination of nodes by itself. So, there is characteristic of flexibility. We use a triangle and a Gaussian-like membership function in premise part of rules and design the consequent structure by constant and regression polynomial (linear, quadratic and modified quadratic) function between input and output variables. GAs is applied to improve the performance with optimal input variables and number of input variables and order. To evaluate the performance of the GAs-based FPNNs, the models are experimented with the use of Medical Imaging System(MIS) data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2946-2948
• /
• 2000

In this paper, we proposed the Fuzzy Polynomial Neural Networks(FPNN) model with fuzzy activation node. The proposed FPNN structure is generated from the mutual combination of PNN(Polynomial Neural Networks) structure and fuzzy inference system. The premise of fuzzy inference rules defines by triangular and gaussian type membership function. The fuzzy inference method uses simplified and regression polynomial inference method which is based on the consequence of fuzzy rule expressed with a polynomial such as linear, quadratic and modified quadratic equation are used. The structure of FPNN is not fixed like in conventional Neural Networks and can be generated. The design procedure to obtain an optimal model structure utilizing FPNN algorithm is shown in each stage. Gas furnace time series data used to evaluate the performance of our proposed model.

• 한국수자원학회논문집
• /
• 제55권10호
• /
• pp.775-784
• /
• 2022

본 연구에서는 임의지속기간의 확률강우량 산정을 위해 실무에서 주로 사용되고 있는 전대수 다항식형 확률강우강도식의 최적차수 결정을 위하여 경상북도 내 9개 지점을 대상으로 확률강우량을 산정하고 전대수 다항식형 강우강도식의 회귀계수를 추정하였다. 추정된 지점별 다항식을 대상으로 단계선택법을 이용하여 각 지점별 다항식의 최적변수를 선정하고 선정된 변수들의 통계적 유의성을 검토하기 위하여 분산분석을 통한 유의성 검정을 실시하였으며, 이들 결과를 이용하여 각 지점별 통계적으로 적절하게 산정된 강우강도식을 제시하였다. 경북 9개 지점의 전대수 다항식형 강우강도식의 변수선정 결과는 6개 지점에서 1~3차식이 최적식으로 나타났고 1개 지점이 불완전 3차식이 최적식으로 나타났다. 그 중 1차는 Sherman 식, 2차는 General 식의 형태와 유사하므로 독립변수의 수를 증가시켜 적합도를 높이고 사용 편의를 위해 통일된 형태의 강우강도식으로 제시한다면 전대수 다항식형 강우강도식은 3차 회귀식까지만 고려하여도 통계학적으로 문제가 없는 것으로 판단된다.

• Journal of the Korean Data and Information Science Society
• /
• 제9권2호
• /
• pp.179-188
• /
• 1998

커널형 회귀함수의 추정법 중에서 국소 다항회귀 추정법이 가장 우수한 것으로 알려져 있다. 국소다항회귀 추정법에서도 다른 종류의 커널추정량과 마찬가지로 평활량이 중요한 역할을 한다. 특히 회귀함수가 복잡한 구조를 가질 때 변수평활량(variable band-width)을 사용하는 것이 타당할 것이다. 본 연구에서는 완전자료기저(fully automatic, fully data-driven) 변수평활량 선택법을 제안한다. 이 선택법은 편향과 분산의 예비추정에 필요한 평활량을 교차타당성 방법으로 선택하여 MSE를 추정하고 그 값을 최소화하는 평활량을 택하는 것이다. 제안된 방법의 우수성을 모의실험을 통하여 확인하였다. 그리고 제안된 방법은 자료점이 성긴(sparse)부분에서 생길 수 있는 문제점 즉 X'X의 비정칙성(non-singularity)을 해결할 수 있는 방법이라는 데에도 큰 의미가 있다.

• 모자간호학회지
• /
• 제1권
• /
• pp.34-44
• /
• 1991

The purposes of this study were to predict newborn birthweight by use of gestational period and fundal height and to identify growth curve of fundal height according to gestational period and growth curve of newborn birthweight according to fundal height. The subjects for the study were 802 women who delivered the normal newborn babies at Seoul National University Hospital from Sep. 1, 1981 to Aug.31, 1986. The data were collected bit chart review and analyzed nth SPSS program. The results of study were as follows : 1. The multiple regression equation ($R^2$=0.416) used for the prediction of newborn birthweight was y=(newborn birthweight, kg)=-4.421+0.075$x_1$(fundal height, cm)+0.053$x_2$(gestational period, weeks)+0.016$x_3$(abdominal girth, cm)+0.010$x_4$(maternal height, cm) 2. The growth curve of fundal height according to gestational period was obtained by polynomial regression. The regression equation was Y(fundal height, cm)=-36.78+18.58$log_ex$(gestational period, weeks) The growth curve of newborn birth weight according to fundal height was obtained by polynomial regression. The regression equation was Y(newborn birthweight, kg)=-8.09+3.27$log_ex$ (Fundal Height, cm) 3. In the following subgroups no significant difference was found in fundal height : engaged vs. nonengaged presentation, and nulliparous vs. multiparous women.

• 제어로봇시스템학회논문지
• /
• 제7권8호
• /
• pp.664-674
• /
• 2001

In this paper, as a new category of fuzzy-neural networks architecture, we propose Fuzzy Polynomial Neural Networks (FPNN) and discuss a comprehensive design methodology related to its architecture. FPNN dwells on the ideas of fuzzy rule-based computing and neural networks. The FPNN architecture consists of layers with activation nodes based on fuzzy inference rules. Here each activation node is presented as Fuzzy Polynomial Neuron(FPN). The conclusion part of the rules, especially the regression polynomial, uses several types of high-order polynomials such as linear, quadratic and modified quadratic. As the premise part of the rules, both triangular and Gaussian-like membership functions are studied. It is worth stressing that the number of the layers and the nods in each layer of the FPNN are not predetermined, unlike in the case of the popular multilayer perceptron structure, but these are generated in a dynamic manner. With the aid of two representative time series process data, a detailed design procedure is discussed, and the stability is introduced as a measure of stability of the model for the comparative analysis of various architectures.