• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1107-1110
• /
• 2006

We investigate the effect of processing temperature of gate insulator and optical anisotropy on organic thin-film transistors (OTFTs). The insulator film which was processed lower temperature than solvent boiling temperature can lead more aligned pentacne molecules compare to higher processed insulator film. It finally gives rise to the big increase of carrier mobility in OTFTs, although there are little difference at the seriously affecting properties to device performance, for example roughness of gate insulator film.

• 전기의세계
• /
• 제26권4호
• /
• pp.68-72
• /
• 1977

The main purpose of this paper is to study on the nature of the traps in polymer. The polyethlene is typical of polymer material as to be selected for a sample. The current I$_{th}$ are obtained with an small external bias voltage from high density polyethylene which have been treated by the high-field application. Two peaks, P$_{1}$ and P$_{2}$ with maxima near 85.deg. C, respectively, appeared on the current I$_{th}$ spectrum. From the results of experiment, It is clear that The current I$_{th}$ arises from the drift, under the external field, of carriers released from the trap sites by the heating and the trap is surrounded by a potential barrier and trapping proceeds during the high-field treatment. The obtained results can suggest that polyethylene contains trap sites which have an important role in the electrical conduction and breakdown of polymeric materials.rials.

• Journal of Microbiology and Biotechnology
• /
• 제25권6호
• /
• pp.803-813
• /
• 2015

The growth of Irpex lacteus F17 and manganese peroxidase (MnP) production in a selfdesigned tray bioreactor, operating in solid-state conditions at a laboratory scale, were studied. The bioreactor was divided into three layers by three perforated trays. Agroindustrial residues were used both as the carrier of bound mycelia and as a nutrient medium for the growth of I. lacteus F17. The maximum biomass production in the bioreactor was detected at 60 h of fermentation, which was consistent with the CO₂ releasing rate by the fungus. During the stationary phase of fungal growth, the maximum MnP activity was observed, reaching 950 U/l at 84 h. Scanning electron microscopy images clearly showed the growth situation of mycelia on the support matrix. Furthermore, the MnP produced by I. lacteus F17 in the bioreactor was isolated and purified, and the internal peptide sequences were also identified with mass spectrometry. The optimal activity of the enzyme was detected at pH 7 and 25℃, with a long half-life time of 9 days. In addition, the MnP exhibited significant stability within a broad pH range of 4-7 and at temperature up to 55℃. Besides this, the MnP showed the ability to decolorize the polymeric model dye Poly R-478 in vitro.

• 센서학회지
• /
• 제5권4호
• /
• pp.35-40
• /
• 1996

수소이온운반체로 HDBA(hexyldibenzylamine)나 HDPA(hexyldiphenylamine)을 이용하여 고분자막 pH 센서를 제작하였고, 온도 및 막의 두께 변화에 대한 전기화학적 특성을 연구하였다. HDPA를 이용한 센서는 수소이온에 대하여 선택적으로 감응하지 않았으며, HDBA를 이용한 센서는 pH 2 - pH 10 범위에서 수소이온에 대하여 선형적이고, 응답시간도 30 - 50초로 매우 빠르며, Nernstian 기울기는 53.6mV/pH을 나타내었다. pH 센서는 유리전극과 비교하여 알칼리금속과 알칼리토 금속이온에 대하여 방해를 적게 받았고, 재현성 및 안정성에 대한 편차는 2 - 4mV(${\pm}0.1mV$)로 우수하게 나타내었다.

• 폴리머
• /
• 제38권1호
• /
• pp.43-48
• /
• 2014

본 논문은 저분자량의 폴리에틸렌이민을 폴리디아세틸렌 리포좀 표면에 연결하여 유전자를 세포 내로 전달할 수 있는 새로운 양이온성 고분자 리포좀 유전자 전달체 개발에 대한 결과이다. 폴리디아세틸렌 리포좀 제조 후에 자외선을 조사하여 고분자성 리포좀을 제조한 후, 유전자의 전달 효율을 높이기 위해 폴리에틸렌이민을 리포좀 표면에 커플링제를 이용하여 공유결합시켜서 PCDA-PEI 리포좀을 합성하였다. 제조한 고분자 리포좀을 이용하여 동물세포 내에서의 유전자 전달 및 발현 효율과 그에 따른 독성을 확인하는 연구를 수행하였다. 사용한 폴리에틸렌이민은 가지형이고 분자량은 2 kD인 것을 사용하였다. DNA와의 복합체 형성을 알아보기 위하여 전기영동 방법과 피코그린 형광 염색 시약을 사용하였으며 효율적으로 복합체를 형성하는 것을 확인하였다. 전달체의 효율과 독성을 확인하기 위하여 HEK 293 및 HeLa 세포를 사용하여 확인하였다. 실험 결과 PCDA-PEI 리포좀은 세포 내에서 비율이 높아질수록 유전자 전달 효율이 증가하는 경향을 보였고, 세포에 대한 독성도 상대적으로 낮음을 확인하였다. 이러한 결과는 PCDA-PEI 리포좀이 효율적인 유전자 혹은 약물 전달체로 사용될 수 있음을 보여주었다.

• Macromolecular Research
• /
• 제12권6호
• /
• pp.573-580
• /
• 2004

To prepare chitosan-based polymeric amphiphiles that can form nanosized core-shell structures (nanopar­ticles) in aqueous milieu, chitosan oligosaccharides (COSs) were modified chemically with hydrophobic cholesterol groups. The physicochemical properties of the hydrophobized COSs (COSCs) were investigated by using dynamic light scattering and fluorescence spectroscopy. The feasibility of applying the COSCs to biomedical applications was investigated by introducing them into a gene delivery system. The COSCs formed nanosized self-aggregates in aqueous environments. Furthermore, the physicochemical properties of the COSC nanoparticles were closely related to the molecular weights of the COSs and the number of hydrophobic groups per COS chain. The critical aggregation concentration values decreased upon increasing the hydrophobicity of the COSCs. The COSCs effi­ciently condensed plasmid DNA into nanosized ion-complexes, in contrast to the effect of the unmodified COSs. An investigation of gene condensation, performed using a gel retardation assay, revealed that $COS6(M_n=6,040 Da)$ containing $5\%$ of cholesteryl chloroformate (COS6C5) formed a stable DNA complex at a COS6C5/DNA weight ratio of 2. In contrast, COS6, the unmodified COS, failed to form a stable COS/DNA complex even at an elevated weight ratio of 8. Furthermore, the COS6C5/DNA complex enhanced the in vitro transfection efficiency on Human embryonic kidney 293 cells by over 100 and 3 times those of COS6 and poly(L-lysine), respectively. Therefore, hydrophobized chitosan oligosaccharide can be considered as an efficient gene carrier for gene delivery systems.

• 폴리머
• /
• 제36권6호
• /
• pp.699-704
• /
• 2012

경구투여를 통한 친수성 약물의 방출조절을 위하여 이중층으로 된 고분자 담체를 설계하였다. 생체고분자인 alginate와 chitosan은 각각 극성 흡수성분으로, poly(D,L-lactide)는 소수성 피막으로, 그리고 theophylline과 diclofenac sodium은 모델 약물로 사용하였다. 담체는 지연방출과 이어지는 지속방출을 위하여 외부 껍질은 poly(D,L-lactide)로, 내부중심은 약물과 함께 알지네이트 또는 키토산으로 구성되어진 이중층의 미립구 담체로 성형하였다. 담체와 약물간의 극성 조합으로 인한 담체의 모폴로지와 약물방출 거동을 조사하였다. 담체와 약물 그리고 pH 환경의 상대적 극성이 약물방출 특성에 상당한 영향이 있음을 확인하였다.

• Journal of Pharmaceutical Investigation
• /
• 제40권spc호
• /
• pp.75-82
• /
• 2010

Specific diseases like cancer and acquired immune deficiency syndrome (AIDS) occur at various organs including lymphatics and spread through lymphatic system. Thus, if therapeutic agents for such diseases are more distributed or targeted to lymphatic system, we can obtain several advantages like reduction of systemic side effect and increase of efficacy. For these reasons, much interest has been focused on the nature of lymphatics and a lot of studies for lymphatic delivery of drugs have been carried out. Because lymphatics consist of single layer endothelium and have high permeability compared with blood capillaries, especially, the studies using nano-sized carriers have been performed. Polymeric nano-particle, liposome, and lipid-based vehicle have been adopted for lymphatic delivery as carriers. According to the administration route and the kind of carrier, the extent of lymphatic delivery efficiency of nano-sized carriers has been changed and influenced by several factors such as size, charge, hydrophobicity and surface feature of carrier. In this review, we summarized the key factors which affect lymphatic uptake and the major features of carriers for achieving the lymphatic delivery. Lymphatic delivery of drug using nano-sized carriers has many fold improved ability of lymphatic delivery compared with that of conventional dosage forms, but it has not shown whole lymph selectivity yet. Even though nano-sized carriers still have the potential and worth to study as lymphatic drug delivery technology as before, full understanding of delivery mechanism and influencing factors, and setting of pharmacokinetic model are required for more ideal lymphatic delivery of drug.

• Journal of Pharmaceutical Investigation
• /
• 제41권3호
• /
• pp.125-142
• /
• 2011

Solid dispersion, defined as the dispersion of one or more active ingredient in a carrier or matrix at solid state, is an efficient strategy for improving dissolution of poorly water-soluble drugs for enhancement of their bioavailability. Compared to other conventional formulations such as tablets or capsules, solid dispersion which can be prepared by various methods has many advantages. However, despite numerous studies which have been carried out, limitations for commercializing these products remain to be solved. For example, during the manufacturing process or storage, amorphous form of solid dispersion can be converted into crystalline form. That is, the dissolution rate of solid dispersion would continuously decrease during storage, resulting in a product of no value. To resolve these problems, studies have been conducted on the effects of excipients. In fact, modification of the solid dispersions to overcome these disadvantages has progressed from the first generation to the recent third generation products. In this review, an overview on solid dispersions in general will be given with emphasis on the various manufacturing processes which include the use of polymers and on the stabilization strategies which include methods to prevent crystallization.

• Membrane and Water Treatment
• /
• 제7권3호
• /
• pp.223-240
• /
• 2016

In this study, poly(vinyl-alcohol) and water insoluble ${\beta}$-cyclodextrin polymer (${\beta}$-CDP) cross-linked with citric acid, have been used as macrocyclic carrier in the preparation of polymer inclusion membranes (PIMs) for aniline (as molecule model) extraction from aqueous media. The obtained membranes were firstly characterized by X-ray diffraction, Fourier transform infrared and water swelling test. The transport of aniline was studied in a two-compartment transport cell under various experimental conditions, such as carrier content in the membranes, stirring rate and initial aniline concentration. The kinetic study was performed and the kinetic parameters were calculated as rate constant (k), permeability coefficient (P) and flux (J). These first results demonstrated the utility of such polymeric membranes for environmental decontamination of toxic organic molecules like aniline. Predictive modeling of transport flux through these materials was then studied using design of experiments; the design chosen was a two level full factorial design $2^k$. An empirical correlation between aniline transport flux and independent variables (Poly ${\beta}$-CD membrane content, agitation speed and initial aniline concentration) was successfully obtained. Statistical analysis showed that initial aniline concentration of the solution was the most important parameter in the study domain. The model revealed the existence of a strong interaction between the Poly ${\beta}$-CD membrane content and the stirring speed of the source solution. The good agreement between the model and the experimental transport data confirms the model's validity.