• Macromolecular Research
• /
• 제14권5호
• /
• pp.530-538
• /
• 2006

There are three important components in tissue engineering: the cells, signaling factors (cytokines and growth factors), and scaffolds. To obtain finely engineered tissue, all three components should perform their individual functions and be fully integrated with each other. For the past few years, we have studied the characteristics of photodimerizable HA (CHA)/alginate (CA) composite materials. CHA/CA complex hydrogels, which were irradiated under UV light and, then treated with calcium ions, were found to have good biocompatibility, mechanical properties and water resistance for implantable tissue scaffolds. In this study, we introduced a cell growth factor (basic fibroblast growth factor; bFGF) into the CHA/CA scaffolds and studied its release behavior. We also introduced tetracycline hydrochloride and flurbiprofen into the same scaffolds as model activation factors and evaluated their release behaviors from the scaffolds. The drug release rate from the materials was influenced by various parameters, such as the degree of crosslinking, the cross linker type, the physico-chemical properties of the drug, and the amount of the drug in the polymer. The results indicated that the negatively charged CHA/CA composite materials showed sustained release behavior and that HA has a particularly strong negative charge, making it attractive toward tetracycline hydrochloride and bFGF, but repulsive toward flurbiprofen.

• 한국재료학회지
• /
• 제16권11호
• /
• pp.715-718
• /
• 2006

Porous hydroxyapatite (HAp) scaffolds have been prepared by using the slurry including HAp and magnesia based on the replication of polymer sponge substrate. The influence of MgO content in slurry on the pore morphology and size, density, porosity, and mechanical strength of porous HAp scaffolds was investigated. The obtained scaffolds with average pore sizes ranging 150 to 300 mm had open, relatively uniform, and interconnected porous structure regardless of MgO content. As the MgO content increased, the pore network frame of scaffolds became to be relatively stronger, even though the pore size was not much changed. The compressive strength of the scaffolds increased rapidly with the increase of MgO content because of increasing the pore wall thickness and density of the scaffolds. As a result, the porosity, density, and compressive strength of the porous HAp scaffolds prepared by the sponge method were significantly affected by the addition of MgO.

• 폴리머
• /
• 제32권6호
• /
• pp.529-536
• /
• 2008

뇌 추출 신경성장인자(BDNF)의 서방성 전달체로써 락타이드-글리콜라이드 공중합체(PLGA) 용액에 탈미네랄화된 골분(DBP) 및 히알루론산(HA)를 균일하게 혼합하여 얼음입자추출법으로 다공성 지지체를 제조하였다. ELISA로 BDNF 방출량을 확인하였으며 SEM으로 방출에 따른 지지체의 다공 특성을 관찰하였다. PLGA지지체와 비교시 DBP/HA/PLGA 지지체에서 지속적으로 일정량이 방출됨을 확인하였으며 BDNF의 양이 증가할수록 빠르고 많은 양이 방출되는 패턴을 보였다. 얼음입자추출법으로 제조된 DBP/HH/PLGA 지지체는 BDNF 등의 수용성 사이토카인의 포접이 용이하고, 생분해성 고분자분해 특성에 의해서 방출이 조절되며, 신경손상부분에 이식시 BDNF가 서방화되어 신경재생에 도움을 줄 것으로 기대된다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.141-144
• /
• 2000

Highly open porous polymer matrices are required for high density cell seeding, efficient nutrient, and oxygen supply to the cells cultured in the three dimensional matrices. However, there are severe problems of mass transfer limitations within the cell/scaffolds culture system. Thus we hypothesize that continuos-flow culture conditioning of cells with the scaffolds may improve the cell viability and the differentiated function. In this study, we fabricated porous PLGA scaffolds by using gas-foaming/salt-leaching method as previous described. Viscous PLGA gel paste contains ammonium bicarbonate particulates, acting as a gas-foaming agent as well as a salt-leaching porogen, were cast into Teflon mold and dried. Ammonium bicarbonate salt upon contact to an acidic aqueous solution evloves gaseous ammonia and carbon dioxide by itself. And we conjugated galactose moiety [AGA; $N-(aminobuty1)-O-{\beta}-D-galactopyranosyl-(1{\rightarrow}4)-D-glucoamide]$ to the terminal end group of a PLGA to increase the cell adhesion and matain the differentiated function of hepatocytes. Cell-seeded scaffolds were secured in a flow bioreactor chamber and exposed to continuous flow at 5 ml/min. As a result of our study, the high yield of hepatocytes attachment was accomplished by increasing the concentration of PLGA-AGA conjugate in polymer scaffolds and cells in the scaffolds under continuos flow condition maintained a high level of viability and albumin secretion rate of cultured hepatocytes showed a higher level that of control groups.

• 폴리머
• /
• 제35권6호
• /
• pp.499-504
• /
• 2011

본 연구팀은 탈미네랄화 골분(DBP)이라는 천연재료를 졸(sol)화시켜 poly(lactide-co-glycolide) (PLGA)에 함침시킨 지지체를 개발하였다. DBP를 함침시킨 PLGA 지지체 상의 세포증식과 모폴로지를 평가하기 위해 MTT 분석과 SEM을 측정하였다. 또한 sGAG와 콜라겐 함량 측정과 파종된 연골 세포의 표현형 유지에 미치는 영향을 확인하였다. 그 결과 PLGA에 DBP를 함침시킨 지지체가 PLGA 지지체보다 높은 세포 증식률을 보였다. 또한 파종된 연골세포의 표현형 유지에도 긍정적인 영향을 미치는 것을 확인하였다. 이번 연구 결과를 토대로 PLGA에 DBP를 이용한 용액을 함침시킴으로써 DBP내의 성장인자와의 상호작용을 통해 연골세포의 성장에 긍정적 영향을 미쳐 안정되게 연골을 조직화할 수 있는 연골조직공학 지지체로 적합할 것으로 예상된다.

• 폴리머
• /
• 제34권5호
• /
• pp.398-404
• /
• 2010

본 연구팀은 DBP를 함침시킨 물성이 서로 다른 스폰지와 PLGA 지지체를 제작한 후 세포 부착, 증식 및 형태 유지를 알아보기 위한 실험을 수행하였다. WST 분석법과 SEM 관찰을 통하여 스폰지에 비해서 PLGA 지지체에서의 세포의 증식이 활발한 것을 확인하였고, RT-PCR을 통해 디스크세포에서 특이적으로 발현하는 제 2형 콜라겐과 어그리칸의 발현을 확인하였다. WST 결과, 세포 증식률은 DBP/PLGA 지지체가 DBP를 함침시킨 스폰지보다 세포 증식률이 높음을 확인하였다. 본 연구팀은 스폰지보다 PLGA 지지체가 인간디스크의 표현형 유지 및 증식에 있어서 긍정적인 영향을 미치는 것을 확인하였다.

• 폴리머
• /
• 제35권3호
• /
• pp.210-215
• /
• 2011

루틴은 항발암, 소염제, 항바이러스성 기능을 갖는 물질이다. 미생물이 만들어낸 폴리에스테르인 PHBV와 루틴을 전기방사하여 나노섬유 부직포를 얻었다. 나노섬유 부직포의 항균성은 황색포도상구균(Staphylococcus aureus), 폐렴간균(Klebsiella pneumoniae)을 사용하여 평가하였고, KB 셀을 이용하여 세포독성을 평가하였다. 그 결과 루틴을 3 wt% 함유할 때 지지체는 우수한 항균성을 보였으며, KB 셀을 이용한 실험결과로부터 루틴을 함유하는 PHBV 지지체는 세포독성을 나타내지 않음을 알 수 있었다.

• Macromolecular Research
• /
• 제9권5호
• /
• pp.267-276
• /
• 2001

In order to endow with new bioactive functionality from demineralized bone particle (DBP) as natural source to poly(L-lactide) (PLA) synthetic biodegradable polymer, porous DBP/PLA as natural/synthetic composite scaffolds were prepared and compared by means of the emulsion freeze drying and solvent casting/salt leaching methods for the possibility of the application of tissue engineered bone and cartilage. For the emulsion freeze drying method, it was observed that the pore size decreased in the order of 79$\mu\textrm{m}$ (PLA control) > 47$\mu\textrm{m}$ (20% of DBP) > 23 $\mu\textrm{m}$ (40% of DBP) > 15$\mu\textrm{m}$ (80% of DBP). Porosities as well as specific pore areas decreased with increasing the amount of DBR. It can be explained that DBP acts like emulsifier resulting in stabilizing water droplet in emulsion. For the solvent casting/salt leaching method, a uniform distribution of well interconnected pores from the surface to core region were observed the pore size of 80 ∼70 $\mu\textrm{m}$ independent with DBP amount. Porosities as well as specific pore areas also were almost same. For pore size distribution by the mercury intrusion porosimeter analysis between the two methods, the pore size distribution of the emulsion freeze drying method was broader than that of the solvent casting/salt leaching method due to the mechanism of emulsion formation. Scaffolds of PLA alone, DBP/PLA of 40 and 80%, and DBP powder were implanted on the back of athymic nude mouse to observe the effect of DBP on the induction of cells proliferation by hematoxylin and eosin staining for 8 weeks. It was observed that the effect of DBP/PLA scaffolds on bone induction are stronger than PLA scaffolds, even though the bone induction effect of DBP/PLA scaffold might be lowered than only DBP powder, that is to say, in the order of DBP only > DBP/PLA scaffolds of 40 and 80% DBP > PLA scaffolds only for osteoinduction activity. In conclusion, it seems that DBP plays an important role for bone induction in DBP/PLA scaffolds for the application of tissue engineering area.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제4권1호
• /
• pp.1-8
• /
• 2019

The aim of this study was to investigate the effect of total polymer concentration on the chemical structure, morphology of pores, porosity, swelling ratio, degradation of gelatin-poly (vinyl alcohol) (Gel-PVA) cryogel scaffolds. Porous cryogels were prepared with cryogelation technique by using glutaraldehyde as a crosslinker. Functional group composition of cryogels after crosslinking was investigated by Fourier Transform Infrared (FTIR). The morphology of cryogels was characterized via scanning electron microscopy (SEM) and porosity analysis. All of the cryogels had a porous structure with an average pore size between $45.58{\pm}14.28$ and $50.14{\pm}4.26{\mu}m$. The cryogels were biodegradable and started to degrade in 14 days. As the polymer concentration increased the swelling ratio, the porosity and the degradation rate decreased. Spongy and mechanically stable Gel-PVA cryogels, with tunable properties, can be potential candidates as scaffolds for tissue engineering applications.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.213-214
• /
• 2007