• Membrane Journal
• /
• v.18 no.3
• /
• pp.226-233
• /
• 2008

PTMSP/PMMH dendrimer composite membranes were made by dispersing $0{\sim}20$ wt% (based on polymer content) PMMH dendrimer nanoparticles in the PTMSP casting solution. The effect of PMMH dendrimer on gas permeability characteristics of the composite membranes was investigated. The permeabilities of $H_2,\;N_2,\;CO_2$, and $CH_4$ decreased as the PMMH dendrimer content within PTMSP increased. The permeabilities of different gases except hydrogen in PTMSP/PMMH dendrimer membranes follow the order: $N_2\;<\;CH_4\;<\;CO_2$ which are consistent with the order of critical temperature ($N_2\;<\;CH_4\;<\;CO_2$). The selectivities of gases for $N_2$ increased as the PMMH dendrimer content within PTMSP increased. The $CO_2/N_2$ selectivity increased from 5.6 up to 16.9.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.60-61
• /
• 1994

복합막은 기존의 비대칭막에 비해서 극히 얇은 표면층을 형성할 수 있다. 이러한 복합막은 배제율도 우수할 뿐만아니라 투과속도 또한 매우 큰 특징을 가지고 있으며, 해수의 담수화를 비롯하여 초순수 제조 등 각종 산업분야에서 많이 응용되고 있다. 우수한 분리막을 제조하기 위해서는 막의 표면층을 보다 더 치밀하고 얇게 형성할 수 있어야 한다. 이렇게 하기 위해서는 지지막 또한 매우 중요한 요인으로 작용한다. 표면층이 치밀하고, 가능한 한 porosity가 큰 지지막을 제조해야한다. 따라서 본 연구에서는 고분자 물질로 Polyethersulfone을 사용하여 지지막을 만들었다. 이 지지막위에 계면중합법으로 NF/RO용 복합막을 제조하였다. 높은 투과 속도 및 염의 배제율이 우수한 복합막을 제조하기 위해서 먼저 Polymer 농도, 첨가제 종류및 농도 등에 의한 각종 제막조건에 따른 지지막의 성능을 조사하였다. 여기에 Monomer 농도를 변화시켜서 계면중합으로 복합막을 제조하여 그 성능 변화를 측정하였다.

• Membrane and Water Treatment
• /
• v.10 no.6
• /
• pp.417-429
• /
• 2019

Poly Sulfone nanofibers were electrospun to fabricate membranes of different characteristics. To fabricate the fiber mats, polymer concentration, flowrate, and current density were determined as the most influencing factors affecting the overall performance of the membranes and studied through Response Surface Methodology. The Box-Behnken Design method (three factors at three levels) was used to design, analyze, and optimize the parameters to achieve the best possible performance of the electrospun membranes in forward osmosis process. Also, internal concentration polarization that characterizes the efficiency of the forward osmosis membranes was determined to better assess the overall performance of the fabricated electrospun membranes. Water flux to reverse salt flux was considered as the main response to assess the performance of the membranes. As confirmed experimentally, best membrane performance with the minimal structural parameter value could be achieved when predicted optimal values were used to fabricate the membranes through electrospinning process.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.2
• /
• pp.123-129
• /
• 2008

Transdermal therapeutic system(TTS) is often used as the method of drug dosage into the epidermic skin. Natural polymer were selected as ointment material of TTS. We investigated the permeation of natural polymer ointment containing drug in rat skin using horizontal membrane cell model. Permeation properties of materials were investigated for water-soluble drug such as Nicotinic acid N-oxide in vitro. These results showed that skin permeation rate of drug across the composite was mainly dependent on the property of ointment base and drug. Proper selection of the polymeric materials which resemble and enhance properties of the delivering drug was found to be important in controlling the skin permeation rate. This result suggests a possible use of natural polymer ointment base as TTS of antihyperlipoproteinemic agent.

• Carbon letters
• /
• v.14 no.2
• /
• pp.110-116
• /
• 2013

This study investigated a developed process for producing a composite bipolar plate having excellent conductivity by using coal tar pitch and phenol resin as binders. We used a pressing method to prepare a compact of graphite powder mixed with binders. Resistivity of the impregnated compact was observed as heat treatment temperature was increased. It was observed that pore sizes of the GCTP samples increased as the heat treatment temperature increased. There was not a great difference between the flexural strengths of GCTP-IM and CPR-IM as the heat treatment temperature was increased. The resistivity of GPR700-IM, heat treated at $700^{\circ}C$ using phenolic resin as a binder, was $4829{\mu}{\Omega}{\cdot}cm$ which was best value in this study. In addition, it is expected that with the appropriate selection of carbon powder and further optimization of process we can produce a composite bipolar plate which has excellent properties.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2529-2535
• /
• 2013

Sol-gel method was utilized to prepare SPEEK/PWA electrolyte composite membranes. TEOS was used as a precursor and phosphotungstic acid(PWA) as a catalyst for the sol-gel reaction. It was observed through FE-SEM analysis that the PWA and silica nanoparticles were uniformly dispersed into the polymer matrix. The water uptake of SPEEK/PWA/silica composite membranes was less affected by TEOS concentration at higher TEOS contents, while the water uptake decreased as TEOS concentration increased at lower TEOS contents. The proton conductivity of the composite membranes showed similar trend as the water uptake of the composite membranes. The methanol permeability of SPEEK/PWA/silica composite membranes decreased as TEOS concentration increased.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.2
• /
• pp.164-175
• /
• 2022

In this work, sulfonated poly (ether ether ketone) (SPEEK) composite membranes including strontium zirconate (SrZrO₃) were fabricated by the electrospinning method. Fourier-transform infrared spectroscopic analysis and X-ray diffraction analysis were used to identify the chemical structure and the crystallinity of SrZrO₃ and electrospun composite membranes. The thermal stability of the pure SPEEK and SPEEK/SrZrO₃ electrospun composite membranes were investigated by using thermogravimetric analysis. The physicochemical properties and proton conductivity were enhanced with the addition of different weight ratio of SrZrO₃ nanofiller (2, 4 and 6 wt%) in SPEEK polymer. The optimized SPEEK/SrZrO₃-4 electrospun membrane containing 4 wt% of SrZrO₃ showed a high proton conductivity compared to other electrospun SPEEK/SrZrO₃ composite membranes. The results indicate that electrospun composite membranes incorporating these perovskite nanofillers should be explored as potential candidates for use in proton exchange membrane fuel cells.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.485-488
• /
• 2002

최근 산업용 유리섬유는 고부가가치 응용분야로 대형 막구조(membrane structure)와 의공학 부품, 인쇄회로기판 등에 응용되고 있으며, 광통신의 주체인 광섬유로 활용되며 점차 그 용도를 넓혀가고 있다. 특히, 근래에 관심을 모으는 유리섬유 복합재료를 이용한 대형 막구조물은 경제성과 건축의 용이성 및 신속성 면에서 기존 건축구조보다 유리하고, 내구성도 우수하기 때문에 그 활용이 증가하고 있다. (중략)

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.1
• /
• pp.1-12
• /
• 2011

To improve the mechanical properties, such as durabilities and antioxidative characteristics, the covalently cross-linked (CL-) SPEEK (sulfonated polyether ether ketone)/Cs-substituted HPA (heteropoly acid) organic-inorganic composite membranes (CL-SPEEK/Cs-HPAs), have been intensively investigated. The composite membrane were prepared by blending cesium-substituted HPAs (Cs-HPAs), including tungstophosphoric acid (TPA), molybdophosphoric acid (MoPA), and tungstosilicic acid (TSiA) with cross-linking agent content of 0.01 mL. And composite electrolytes composed of Cs-HPAs, prepared by immersion (imm.) and titration (titr.) methods to increase the stability of HPAs in water, were applied to polymer electrolyte membrane electrolysis (PEME). As a result, the proton conductivity of Cs-substituted composite membranes increased rapidly over $60^{\circ}C$ but mechanical properties, such as tensile strength, decreased in accordance with added Cs content. The bleeding-out of Cs-TPA membranes by titration method (50 vol.% Cs) decreased steadily to 2.15%. In the oxidative stability test by Fenton solution, the durability of membranes with Cs-HPA significantly increased. In case of CL-SPEEK/ Cs-TPA membrane, duration time increased more than 1200 hours. It is expected that even though CL-SPEEK/Cs-MoPA membrane shows the high proton conductivity, electrocatalytic activity and cell voltage of 1.80 V for water electrolysis, the CL-SPEEK/Cs-TPA (imm.) is more suitable as an alternative membrane in real system with the satisfactory proton conductivity, mechanical properties, anti-oxidative stability and cell voltage of 1.89 V.

• Membrane Journal
• /
• v.23 no.3
• /
• pp.237-244
• /
• 2013

We fabricated several composite membranes with selectively permeable performance designed to facilitate water vapor transport and resist DMMP vapor permeation. Materials for selective permeable membrane were based on polyvinyl alcohol and functional polymer containing basic functional group. With these materials, we characterized selectively permeable performance to identify next-generation material with chemical-biological protective capability. Results showed that polyvinyl alcohol (PVA)/polyethyleneimine (PEI) materials possessed performance with superior water vapor permeation ($2,200{\sim}2,900g/m^2/day$) and protective capability against DMMP vapor ($47g/m^2/day$).