• 한국CDE학회논문집
• /
• 제4권3호
• /
• pp.190-199
• /
• 1999

Presented in this paper is an algorithm for finding all intersections among polygonal chains with an O((n+k)·log m) worst-case time complexity, where n is the number of lien segments in the polygonal chains, k is the number of intersections, and m is the number of monotone chains. The proposed algorithm is based on the sweep line algorithm. Unlike the previous polygonal-chain intersection algorithms that are designed to handle special only cases, such as convex polygons or C-oriented polygons, the proposed algorithm can handle arbitrarily shaped polygonal chains having self-intersections and singularities (tangential contact, multiple intersections). The algorithms has been implemented and applied to 1) testing simplicity of a polygon, 2) finding intersections among polygons and 3) offsetting planar point-sequence curves.

• 대한전자공학회논문지
• /
• 제25권1호
• /
• pp.56-62
• /
• 1988

For shape description, a fast sequential method for polygonal approximation of chaincoded plane curves which are object boundaries is proposed. The proposed method performs polygonal approximation by use of the distance error from one point to a line, and its performance is enhanced by the smoothed slopes of lines. Furthermore, accumulated distance error and variable distance error threshold are proposed in order to consider and implement the visual characteristics of the human being.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.59-64
• /
• 2002

This paper presents a method for line segment extraction for 3-d building reconstruction. Building roofs are described as a set of planar polygonal patches, each of which is extracted by watershed-based image segmentation, line segment matching and coplanar grouping. Coplanar grouping and polygonal patch formation are performed per region by selecting 3-d line segments that are matched using epipolar geometry and flight information. The algorithm has been applied to high resolution aerial images and the results show accurate 3-d building reconstruction.

• International Journal of CAD/CAM
• /
• 제9권1호
• /
• pp.71-77
• /
• 2010

Various applications, such as mesh composition and model repair, ask for a natural stitching for polygonal surfaces. Unlike the existing algorithms, we make full use of the information from the two feature lines to be stitched up, and present an accurate stitching method for polygonal surfaces, which minimizes the error between the feature lines. Given two directional polylines as the feature lines on polygonal surfaces, we modify the general placement method for points matching and arrive at a closed-form solution for optimal rotation and translation between the polylines. Following calculating out the stitching line, a local surface optimization method is designed and employed for postprocess in order to gain a natural blending of the stitching region.

• 한국멀티미디어학회논문지
• /
• 제12권1호
• /
• pp.50-57
• /
• 2009

본 논문은 3차원 다각형 모델에서 특징 선을 추출하기 위한 방법에 대해 제안한다. 이산 곡면으로 이루어진 다각형 모델에서 특징 선을 추출하기 위하여 기존 방법에서는 전역적인 음함수 곡면 맞춤 기법(Implicit Surface Fitting)을 이용하여 모델의 꼭지점에서 곡률과 곡률 미분 값을 측정하였다. 이러한 방법은 다각형 모델의 꼭지점에서 음함수 곡면으로 정확하게 투영할 수 있도록 사용자의 정의 파라미타를 찾아야 하며, 특징 추출을 위한 많은 계산 시간을 요구한다. 그러나 제안 방법은 지역적 음함수 곡면 맞춤 기법을 이용하여 모델의 꼭지점에 근사된 곡면을 통해 미분 정보를 측정한다. 측정된 미분 정보를 통해 쉽게 각각의 모서리에서 제로-클로싱을 통해 특징 점을 추출하고, 곡률 방향을 따라 추출된 점들을 연결하여 특징 선을 생성한다. 여러 가지 다각형 모델에서 실험을 하였고 기존 방법보다 빠르며 높은 품질의 특징 선을 추출한다.

• International Journal of CAD/CAM
• /
• 제2권1호
• /
• pp.23-28
• /
• 2002

This paper presents an efficient line-offset algorithm for general polygonal shapes with islands. A developed sweep-line algorithm (SL) is introduced to find all self-intersection points accurately and quickly. The previous work is limited to handle polygons that having no line-segments in parallel to sweep-line directions. The proposed algorithm has been implemented in Visual C++ and applied to offset point sequence curves, which contain several islands.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1062-1073
• /
• 2007

Acoustic Target Strength (TS) is a major parameter of the active sonar equation, which indicates the ratio of the radiated intensity from the source to the re-radiated intensity by a target. In developing a TS equation, it is assumed that the radiated pressure is known and the re-radiated intensity is unknown. This research provides a TS equation for polygonal plates, which is applicable to near field acoustics. In this research, Helmholtz-Kirchhoff formula is used as the primary equation for solving the re-radiated pressure field; the primary equation contains a surface (double) integral representation. The double integral representation can be reduced to a closed form, which involves only a line (single) integral representation of the boundary of the surface area by applying Stoke's theorem. Use of such line integral representations can reduce the cost of numerical calculation. Also Kirchhoff approximation is used to solve the surface values such as pressure and particle velocity. Finally, a generalized definition of Sonar Cross Section (SCS) that is applicable to near field is suggested. The TS equation for polygonal plates in near field is developed using the three prescribed statements; the redection to line integral representation, Kirchhoff approximation and a generalized definition of SCS. The equation developed in this research is applicable to near field, and therefore, no approximations are allowed except the Kirchhoff approximation. However, examinations with various types of models for reliability show that the equation has good performance in its applications. To analyze a general shape of model, a submarine type model was selected and successfully analyzed.

• 한국정보통신학회논문지
• /
• 제24권10호
• /
• pp.1355-1360
• /
• 2020

지도에서 특별한 지형지물에 이름이나 설명문에 해당하는 레이블을 붙이는 것을 지도 레이블링(map labeling)이라고 한다. 본 논문에서는 직선상에 n개의 점들이 주어지고 점들에 대한 직사각형의 레이블을 위치시키는 문제를 다룬다. 특별히 레이블들의 높이는 모두 같고, 점들이 위치한 직선의 위쪽에 아래 변들이 모두 동일 선 위에 위치하도록 놓는다. 그리고 점과 레이블을 꺾은선으로 연결하고 이것을 지시선이라 부른다. 지시선은 수직선만으로 구성된 직선 지시선과 수직선, 수평선, 수직선으로 구성된 꺾인 지시선으로 나뉜다. 문제는 꺾인 지시선의 수를 최소화하도록 레이블을 위치시키는 것이고, 우리는 O(nlogn) 시간 알고리즘을 제안함으로서 [13]에서 제안한 O(n2) 시간 알고리즘을 개선한다.

• 한국조경학회지
• /
• 제27권4호
• /
• pp.137-142
• /
• 1999

The purpose of this study is to develope a CAD-based tool for rasterization of polygonal vector map in AutoCAD. To identity the layer property of polygonal entity with user-defined coordinates as topology, algorithm in processing entity data of selection set that intersected with scan line was used, and the layers were extracted sequentially by sorted intersecting points in data-list. In addition to the functions for querying and modifying topology, two options for mapping were set up to construct plan projection type and to change meshes' properties in existing DTM data. In case of plan projection type, user-defined cell size of 3DFACE mesh is available for more detailed edge, and topological draping on landform can be executed in case of referring DTM data as an AutoCAD's drawing. The concept of algorithm was simple and clear, but some unexpectable errors were found in detecting intersected coordinates that were AutoCAD's error, not the utility's. Also, the routines to check these errors were included in algorithmic processing. Developed utility named MESHMAP was written in entity data control functions of AutoLISP language and dialog control language(DCL) for the purpose of user-oriented interactive usage. MESHMAP was proved to be more effective in data handling and time comparing with GRIDMAP module in LANDCADD which has similar function.

• 소성∙가공
• /
• 제15권2호
• /
• pp.118-125
• /
• 2006

API steel is used for line-pipe to transport the oil and natural gas. As the recent trends in the development of API steel are towards the use of larger diameter and thicker plate, many researches have been studied to achieve higher strength, higher toughness and lower yield ratio in API steel. However, the strength of API steel after pipe forming is changed depending on the competition of the Bauschinger effect and work hardening which are affected by the strain history during pipe forming process. So, the purpose of this study is to investigate the influence of microstructure on the Bauschinger effect for API steel. To change the microstructure of API steel we have changed the hot rolling condition and the amounts of V and Cu addition. The compression-tensile test and the microstructure observation by OM and TEM were conducted to investigate the yield strength drop and the correlation between the Bauschinger effect and microstructure of API steel. The experimental results show that the increase of polygonal ferrites volume fraction increases the Baushcinger effect due to the back stress which comes from the increase of mobile dislocation density at polygonal ferrite interior during the compressive deformation. The hot rolling condition was more effective on the Bauschinger effect in API steel than the small amount of V and Cu addition.