• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.90-95
• /
• 2000

Today fiber composite materials are routinely used in such wide applications as ships automobiles aircraft space vehi-cles containers sporting goods and appliances. The current knowledge of machining glass fiber reinforced polyester com-posites unfortunately is inadequate for its optimum utilization in many applications. Therefore This paper deals with drilling characteristic of glass fiber reinforced polyester composites. In the drilling of glass fiber reinforced polyester the quality of the cut surfaces is strongly dependent on the drilling parameters. drilling tests were carried out on glass fiber reinforced polyester using standard HSS tools. The material containing random chopped strand fibers and woven roving was fabricated by hand lay-up The entrance and exit surface of the holes was examined. The cutting force was also mea-sured to analyze the drilling characteristics,.

• 한국의류산업학회지
• /
• 제3권4호
• /
• pp.373-377
• /
• 2001

When the polyester/cellulosic fiber mixed fabrics were treated with sodium hydrogensulfate for burn-out printing, it is examined how the effects of process conditions as concentration of acid, fixation temperature and fixation time act onto the properties of the polyester ground fabrics. The print paste, indalca solution, was mixed with sodium hydrogensulfate and glycerine, and then screen-printed on the fabrics. The properties of the polyester ground fabrics after removing away the cellulosic fibers were investigated. The yellowness index and the breaking load of polyester ground fabrics affected by the process conditions, especially dry heat fixation temperature.

• 한국응용과학기술학회지
• /
• 제19권2호
• /
• pp.137-144
• /
• 2002

Methyl glycoside oleic acid polyester was successfully prepared from methyl glycosides and methyl oleate by emulsion interesterification in the presence of methyl fructoside oleic acid polyester as an emulsifier. Emulsion interesterification process was optimized to obtain 98% yield of methyl glycoside polyester within $3{\sim}5hr$ at temperatures as relatively low as $90{\sim}150^{\circ}C$ and $20{\sim}200mmHg$ pressure with a five-fold molar ratio of oleic acid methyl ester to methyl glycoside in the presence of 2(w/w)% potassium carbonate and 2O(v/v)% methyl fructoside polyester based on oleic acid methyl ester.

• KSBB Journal
• /
• 제25권3호
• /
• pp.251-256
• /
• 2010

e-ma폐지를 사용하여 액화와 가교단계를 거쳐 polyester를 제조하였다. 첫 번째 단계에서는 EG를 사용하여 산 촉매하에서 폐지를 액화하였다. 폐지의 액화수율에 영향을 미치는 인자는 반응시간, 반응온도, 그리고 촉매농도이고 각각 60~120분, $150{\sim}170^{\circ}C$, 그리고 2~4% 범위 내에서 실험하였다. 최적조건은 100분, $160^{\circ}C$, 3%이었고 이 조건에서 액화수율은 67%이었다. 두 번째 단계에서는 최적조건에서 얻어진 폐지 액화물을 succinic anhydride와 반응시켜 polyester를 제조하였다. 반응시간과 carboxyl기/수산기의 비가 각각 35~50분, 1.5~2.5의 범위 내에서 가교도에 미치는 영향을 조사하였다. 제조된 polyester의 가교도는 80~90%로 반응조건에 따라 큰 차이가 없었다.

• 패션비즈니스
• /
• 제13권2호
• /
• pp.78-86
• /
• 2009

When scouring and contraction finishing at $90^{\circ}C$ using Relaxer or Rotary Washer contraction and weight loss ratio in warp and weft directions were excellent. Also surface state of fabric after drying or sanding treatment was excellent without crease. Low melting polyester fabric showed a complete melting bond by heat setting(P/S) at above $160^{\circ}C$. The alkali hydrolysis reaction of polyester showed the breakpoint in the weight loss behavior test, polyester yarn showed a breakpoint ranging from 25% to 28%. This is due to the difference of the hydrolysis rate between regular polyester and soluble polyester. Initially the soluble polyester was eluted and micro-fibrillized 5 times faster than a regular polyester. At a later time, a regular polyester was reduced weight to impart a proper flexibility and drape property to the fabric. As a result of surface sanding finishing, the surface of interior fabric showed a surface state most stabilized when using Mesh No. 220 in mono 0.2d after elution finishing. When the rotation direction of sanding roller was pro-, pro-, pro-, and retro-direction, a directional effect of tuft was not shown, a writing effect as suede was exhibited and a surface state was even. Sublimation fastness was 3-4 class for polyester and 2-4 class for nylon. Light fastness 3-4 class after lapse of 100 hours and 2-4 class after lapse of 160 hours. Abrasion fastness was 3-4 class on wet and 4-5 class on dry Laundry fastness was 2-4 class. As such, the abrasion fastness is slightly reduced upon wetting and the use thereof for interior is excellent, whereas laundry fastness is slightly lowered.

• 한국염색가공학회지
• /
• 제28권2호
• /
• pp.77-91
• /
• 2016

Recently, the spun blend yarns with staple fibers and filaments are being developed in the spinning process using an air blowing and electrostatic spinning technology(cyclone) in order to enhance the soft feeling and the fine count spun blend yarn manufacturing competitiveness. In this study, the appropriate separation condition of polyester multifilament was examined according to the treatment condition of conductive agents and voltage on polyester multifilament in the newly developed cyclone spinning process. And it was investigated the physical properties and dyeability of the cyclone wool/polyester spun blend yarns and its wool composite fabrics in comparison with existing sirofil wool/polyester spun blend yarn and its fabrics. As the result, it is determined that the newly developed cyclone wool/polyester spun blend yarn applied fabrics has a superior quality level in terms of practicality.

• 한국염색가공학회지
• /
• 제9권5호
• /
• pp.42-51
• /
• 1997

The purpose of this article is to investigate the effect of $O_{2}$ low temperature plasma treatment oft chitosan treatment of polyester fabrics. Moisture regain, static charge, crease resistance and reduction ratio of the treated fabric were measured. The results of this study were as follows: The add-on ratio and. the moisture regain of polyester fabrics treated with chitosan after treated by plasma(CP PET) were higher than those of polyester fabrics treated with only chitosan(C PET). The static charge of polyester fabrics decreased greatly with increasing the concentration of chitosan. A durability for laundering of CP PET was higher than those of C PET. The crease resistance of polyester fabrics decreased with ihcreasing the concentration of chitosan continuously. CP PET had higher decreasing rate and better durability than C PET. It showed that chitosan-treated polyester fabrics had over 90% reduction ratio after 10 times of laundering, and CP PET had better reduction ratio than C PET.

• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.10-15
• /
• 2006

In this article, effect of the dyeing and mechanical properties were investigated on the polyester ultramicro fiber(UMF) and knitted fabric varying fiber fineness(0.01d and 0.05d). By a treatment with NaOH solution, sea-ingredient was removed and polyester micro-fiber was revealed. The dyeing, build-up and fastness properties of the fiber and fabrics were observed. We used C.I. Disperse Red 60 and Blue 56 for dyeing property and eight Lumacron dyes for build-up property and colorfastness. At low temperature dyeing($100^{\circ}C$), the dyeing rate of 0.01d-polyester UME increased more than that of 0.05d-polyester UMF with Disperse Red 60 and Blue 56 whereas dyeing rate of 0.05d-polyester UMF were increased more than that of 0.01d-polyester UMF at high temperature($120^{\circ}C$), The colorfastnesses of the 0.05d-fiber knitted fabric such as washing, rubbing and light was higher than those of the 0.01d-fiber knitted fabric.

• 한국콘텐츠학회논문지
• /
• 제19권12호
• /
• pp.565-572
• /
• 2019

생산설비의 적절한 조합을 통한 생산 라인의 최적화는 국내 폴리에스터 산업의 경쟁력 강화를 위해 중요한 과제다. 본 연구의 목적은 폴리에스터 생산 라인의 최적화를 위해 생산 설비의 조합에 대한 우선순위를 평가하는 방법을 제시하고, 이를 통해 최적의 생산 라인 구성 방안을 도출하는데 있다. 이를 위해 폴리에스터 생산라인의 평가에 필요한 요소들을 도출하고, 이를 활용한 계층분석절차를 제시하였다. 이 방법을 활용하여 폴리에스터 생산라인 평가를 위한 요소들에 대한 가중치를 도출하였으며, 검토 중인 실제 생산라인들에 대한 우선순위와 그 시사점을 제시하였다.

• 대한가정학회지
• /
• 제33권3호
• /
• pp.243-253
• /
• 1995

This study has been carried out for the antimicrobial effects of organic silicon quaternary ammonium salt with which cotton, polyester, and wool were treated respectively, using Esherichia coli and Proteus bulgaris which are experimental bacteria for clothing materials. As a results, the best antimicrobial effects of organic silicon quaternary ammonium salt came out from cotton ; the next form wool ; and lower from polyester. With the changes of the temperature, the antimicrobial effect with soaking time, there was no changes with cotton after 10 minutes passed. It seemed to have reacted entirely in the early stage. The longer the soaking duration was, the higher the effect from polyester was. The effect from wool was increased until 20 minutes, but decreased after 30 minutes. The optimal processing condition of cotton was in the condition of liquor ratio 40:1, concentration 0.5%, soaking time 5 minutes, and temperature 3$0^{\circ}C$ ; wool was 1.5%, 20 minutes, and 6$0^{\circ}C$ ; polyester was 2.0%, 30 minutes, and 3$0^{\circ}C$ respectively. The changes of the effect by washing was as followings : The processing effect on cotton and wool appeared to be everlasting, since they had no changes by washing 10 times ; while, it was remarkablely decreased with polyester by washing only once, and was almost disappeared after washing 10 times, which means that polyester has no durability to washing.