• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권12호
• /
• pp.761-767
• /
• 1999

Poly-Si TFTs(polycrystalline silicon thin film transistors) fabricated on a low cost glass substrate have attracted a considerable amount of attention for pixel elements and peripheral driving circuits in AMLCS(active matrix liquid crystal display). In order to apply poly-Si TFTs for high resolution AMLCD, a high operating frequency and reliable circuit performances are desired. A new poly-Si TFT with CLBT(counter doped lateral body terminal) is proposed and fabricated to suppress kink effects and to improve the device stability. And this proposed device with BC(buried channel) is fabricated to increase ON-current and operating frequency. Although the troublesome LDD structure is not used in the proposed device, a low OFF-current is successfully obtained by removing the minority carrier through the CLBT. We have measured the dynamic properties of the poly-Si TFT device and its circuit. The reliability of the TFTs and their circuits after AC stress are also discussed in our paper. Our experimental results show that the BC enables the device to have high mobility and switching frequency (33MHz at $V_{DD}$ = 15 V). The minority carrier elimination of the CLBT suppresses kink effects and makes for superb dynamic reliability of the CMOS circuit. We have analyzed the mechanism in order to see why the ring oscillators do not operate by analyzing AC stressed device characteristics.

• 전자공학회논문지D
• /
• 제35D권6호
• /
• pp.46-53
• /
• 1998

저온 공정으로 제작되는 다결정 실리콘 박막 트랜지스터의 활성층을 이중 활성층(a-Si/a-SiN/sub x/)으로 제작하는 공정을 제안하고 다결정 실리콘 박막 트랜지스터를 제작하였다. 본 논문에서는 활성층의 아래쪽 실리콘 박막에 약간의 질소기를 첨가한 후 그 위에 순수한 비정질 실리콘 박막을 증착하여 엑시머 레이저의 에너지로 비정질 실리콘 박막을 결정화하여 사용하였다. 이중 활성층 (a-Si/a-SiN/sub x/)의 경우, 하부층의 NH₃/SiH₄ 유속비가 증가함에 따라, 상부 a-Si 층의 결정 성장이 촉진됨을 알 수 있었으나, n/sup +/ poly-SiN/sub x/ 층의 전도도 특성을 고려해 볼 때, NH₃/SiH₄ 유속비는 0.11의 상한치를 가짐을 알 수 있었다. 전계 방출 전류에 영향을 미치는 광학적 밴드갭의 경우, poly-Si 박막에 비해 증가하였으며, NH₃/SiH₄ 유속비가 0.11 이하에서도 0.1eV 정도의 증가를 보여, 이로 인하여 소자 제작시 전계 방출 전류가 억제될 것을 예상할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1968-1970
• /
• 1996

We investigate a surface-micromachined polysilicon microgyroscope, whose resonant frequencies are electrostatically-tunable after fabrication. The microgyroscope with two oscillation nudes has been designed so that the resonant frequency in the sensing mode is higher than that in the actuating mode. The microgyroscope has been fabricated by a 4-mask surface-micrormachining process, including the deep RIE of a $6{\mu}m$-thick LPCVD polycrystalline silicon layer. The resonant frequency in the sensing mode has been lowered to that in actuating mode through the adjustment of an inter-plate bias voltage; thereby achieving a frequency matching at 5.8kHz under the bias voltage of 2V in a reduced pressure of 0.1torr. For an input angular rate of $50^{\circ}/sec$, an output signal of 20mV has been measured from the tuned microgyroscope under an AC drive voltage of 2V with a DC bias voltage of 3V.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권9호
• /
• pp.623-627
• /
• 1999

We report a new in-situ fluorine passivation method without in implantation by employing excimer laser annealing of $SiO_{x}F_{y}$/a-Si structure and its effects on p-channel poly-Si TFTs. The proposed method doesn't require any additional annealing step and is a low temperature process because fluorine passivation is simultaneous with excimer-laser-induced crystallization. A in-situ fluorine passivation by the proposed method was verified form XPS analysis and conductivity measurement. From experimental results, it has been shown that the proposed method is effective to improve the electrical characteristics, specially field-effect mobility, and the electrical stability of p-channel poly-Si TFTs. The improvement id due to fluorine passivation, which reduces the trap state density and forms the strong Si-F bonds in poly-Si channel and $SiO_2/poly-Si$ interface. From these results, the high performance poly-Si TFTs canbe obtained by employing the excimer-laser-induced fluorine passivation method.

• 한국재료학회지
• /
• 제8권2호
• /
• pp.147-153
• /
• 1998

$WN_x$ 는 리소그라피 마스크의 흡수체나 VLSI 기술에서 금속연결의 확산방지재로써 주목을 받고 있다. RF마르네트론 스퍼터링법으로 여러 증착변수에서 제조한 $WN_x$ 막을 고찰하였다. $SiN_x$ 멤브레인 위에 증착된 박막의 결정구조는 질소아르곤 가스유량비(0-30%), 가스압력(10-43mTorr), RF출력(0150W)및 기판과 타겟사이의 거리 6cm에서 증착한 $WN_x$ 박막은 비정질이였으며 다른 조건에서는 표면이 거친 다결정질이었다. 비정질 박막은 rms가 $3.1\AA$으로 아주 매끈하여 X-선 마스크용 흡착제로써 적합할 것으로 기대된다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.44-48
• /
• 2007

In recent years, the size of plane substrates and semiconductor wafers has increased. As conventional contact transportation systems composed of, for example, carrier rollers, belt conveyers, and robot hands carry these longer and wider substrates, the increased weight results in increased potential for fracture. A noncontact transportation system is required to solve this problem. We propose a new noncontact transportation system combining acoustic viscous and aerostatic forces to provide damage-free transport. In this system, substrates are supported by aerostatic force and transported by acoustic viscous streaming induced by traveling wave deformation of a disk-type stator. A ring-type piezoelectric transducer bonded on the stator excites vibration. A stator with a high Q piezoelectric transducer can generate traveling vibrations with amplitude of $3.2{\mu}m$. Prior to constructing a carrying road for substrates, we clarified the basic properties of this technique and stator vibration characteristics experimentally. We constructed the experimental equipment using a rotational disk with a 95-mm diameter. Electric power was 70 W at an input voltage of 200 Vpp. A rotational torque of $8.5\times10^{-5}Nm$ was obtained when clearance between the stator and disk was $120{\mu}m$. Finally, we constructed a noncontact transport apparatus for polycrystalline silicon wafers $(150(W)\times150(L)\times0.3(t))$, producing a carrying speed of 59.2 mm/s at a clearance of 0.3 mm between the stator and wafer. The carrying force when four stators acted on the wafer was $2\times10^{-3}N$. Thus, the new noncontact transportation system was demonstrated to be effective.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권6호
• /
• pp.229-235
• /
• 2002

This paper presents the fabrication of polycrystalline thin film transistor(TFT) using sequential lateral solidification(SLS) of amorphous silicon. The fabricated SLS TFT showed high Performance suitable for active matrix liquid crystal display(AMLCD). The SLS process involves (1) a complete melting of selected area via irradiation through a patterned mask, and (2) a precisely controlled pulse translation of the sample with respect to the mask over a distance shorter than the super lateral growth(SLG) distance so that lateral growth extended over a number of iterative steps. The SLS experiment was performed with 550$\AA$ a-Si using 308nm XeCl laser having $2\mu\textrm{m}$ width. Irradiated laser energy density is 310mJ/$\textrm{cm}^2$ and pulse duration time was 25ns. The translation distance was 0.6$\mu$m/pulse, 0.8$\mu$m/pulse respectively. As a result, a directly solidified grain was obtained. Thin film transistors (TFTs) were fabricated on the poly-Si film made by SLS process. The characteristics of fabricated SLS p -type poly-Si TFT device with 2$\mu\textrm{m}$ channel width and 2$\mu\textrm{m}$ channel length showed the mobility of 115.5$\textrm{cm}^2$/V.s, the threshold voltage of -1.78V, subthreshold slope of 0.29V/dec, $I_{off}$ current of 7$\times$10$^{-l4}$A at $V_{DS}$ =-0.1V and $I_{on}$ / $I_{off}$ ratio of 2.4$\times$10$^{7}$ at $V_{DS}$ =-0.1V. As a result, SLS TFT showed superior characteristics to conventional poly-Si TFTs with identical geometry.y.y.y.

• 한국표면공학회지
• /
• 제36권1호
• /
• pp.14-21
• /
• 2003

Thin films of ZrO$_2$ and TiO$_2$ were deposited on Si(100) substrates using RF magnetron sputtering technique. To study an influence of the sputtering parameters, systematic experiments were carried out in this work. XRD data show that the $ZrO_2$ films were mainly grown in the [111] orientation at the annealing temperature between 800 and $1000^{\circ}C$ while the crystal growth direction was changed to be [012] at above $1000^{\circ}C$. FT-IR spectra show that the oxygen stretching peaks become strong due to $SiO_2$ layer formation between film layers and silicon surface after annealing, and proved that a diffusion caused by either oxygen atoms of $ZrO_2$ layers or air into the interface during annealing. Different crystal growth directions were observed with the various deposition parameters such as annealing temperature, RF power magnitude, and added $O_2$ amounts. The growth rate of $TiO_2$ thin films was increased with RF power magnitude up to 150 watt, and was then decreased due to a sputtering effect. The maximum growth rate observed at 150 watt was 1500 nm/hr. Highly oriented, crack-free, stoichiometric polycrystalline $TiO_2$<110> thin film with Rutile phase was obtained after annealing at $1000^{\circ}C$ for 1 hour.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.27-27
• /
• 2010

최근에 고유가와 지구온난화로 인하여 에너지가 향후 인류의 50년을 좌우할 가장 큰 문제로 대두되고 있어서 지구의 모든 에너지의 근원인 태양광을 이용하는 태양광 발전은 무한한 청정 에너지로 각광받고 있다. 빛을 흡수하여 전기에너지로 변환하는 태양전지는 풍력, 수소연료전지, 조력, 바이오에탄올 등의 신재생에너지 기술 중에서 상품성은 가장 뛰어나지만 발전단가가 가장 높은 것이 단점이다. 태양광 발전단가를 줄여서 기존의 화석에너지를 이용한 발전단가와 견줄 수 있는 그리드 패러티(grid parity)를 달성하려면 태양전지 모듈의 고효율화와 동시에 저가화가 반드시 이루어져야 한다. 현재 태양광 모듈 시장의 90%는 효율이 12-16% 정도로 높은 단결정(single crystalline or monocrystalline) 실리콘이나 다결정(polycrystalline or multicrystalline) 실리콘 등의 벌크(bulk)형 결정질 실리콘 모듈이 차지하고 있으나 원재료인 실리콘 웨이퍼의 제조단가의 50%를 차지하고 있어서 저가화가 어렵다. 반면, 원료가스를 분해하여 대면적 기판에 증착하는 박막(thin-film) 실리콘 태양전지의 경우는 차세대 태양전지로 각광받고 있다. 박막 실리콘 모듈은 매우 적은 실리콘 원재료를 소비한다. 단결정이나 다결정 실리콘 웨이퍼의 두께가 $180-250\;{\mu}m$ 정도인 것에 비해서 박막 실리콘의 두께는 $0.3-3\;{\mu}m$ 수준이다. 더불어, 유리, 플라스틱 등의 저가 기판에 저온 대면적 증착이 가능하여 저가양산화에 유리하다. 박막 실리콘 모듈은 벌크형 실리콘 모듈(-0.5%/K) 대비 낮은 온도계수[비정질 실리콘(amorphous silicon; a-Si:H)의 경우 -0.2%/K]와 빛의 세기가 약한 산란광에서도 동작하여 평균발전시간이 증가하므로 외부환경에서 우수한 발전성능을 보이고 있다. 태양전지 모듈은 상온에서의 안정화 효율을 기준으로 가격이 책정되어($/$W_p$) 판매되기 때문에 벌크형 실리콘 모듈에 비해서 박막 실리콘 모듈은 가격대 성능비가 우수하다. 따라서 박막 실리콘 모듈은 벌크형 결정 실리콘 모듈의 대안으로 떠오르고 있으며, 레이저 기술을 이용하여 수려한 투광형 건물일체형(building integrated photovoltaic; BIPV) 모듈을 제작할 수 있는 장점도 있다. 이러한 장점에도 불구하고 기존의 양산화된 단일접합 비정질 실리콘 태양광 모듈은 효율이 6-7%로 낮아서 설치면적 및 설치 모듈의 증가가 성장의 걸림돌이 되고 있다. 박막 실리콘 태양전지의 고효율화를 도모하기 위해서 적층형 탄뎀셀로 양산 트렌드가 변화하고 있다. 이에 적층형 박막 실리콘 태양전지 효율의 한계 및 돌파구에 대해서 논의한다.

• 열처리공학회지
• /
• 제34권5호
• /
• pp.239-244
• /
• 2021

Following Silicon Carbide, single crystal diamond continues to attract attention as a next-generation semiconductor substrate material. In addition to excellent physical properties, large area and productivity are very important for semiconductor substrate materials. Research on the increase in area and productivity of single crystal diamonds has been carried out using various devices such as HPHT (High Pressure High Temperature) and MPECVD (Microwave Plasma Enhanced Chemical Vapor Deposition). We hit the limits of growth rate and internal defects. However, HFCVD (Hot Filament Chemical Vapor Deposition) can be replaced due to the previous problem. In this study, HFCVD confirmed the distance between the substrate and the filament, the accompanying growth rate, the surface shape, and the Raman shift of the substrate after vapor deposition according to the vapor deposition temperature change. As a result, it was confirmed that the difference in the growth rate of the single crystal substrate due to the change in the vapor deposition temperature was gained up to 5 times, and that as the vapor deposition temperature increased, a large amount of polycrystalline diamond tended to be generated on the surface.