• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.05a
• /
• pp.37-38
• /
• 1993

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.77-82
• /
• 1996

The breakdown characteristics of metal-oxide-semiconductor(MOS) capacitors fabricated by Al, polysilicon, and tungsten polycide gate electrodes onto gate oxide was evaluated by time zero dielectric breakdwon (TZDB). The average breakdown field of the gate oxide with tungsten polycide electride was lower than that of the polysilicon electrode. The B model (1~8MV/cm) failure of the gate oxide with tungsten polycide electrode was increased with increasing annealing temperature in the dry $O_{2}$ ambient. This is attributed ot fluorine and tungsten diffusion from thungsten silicide film into the gate oxide, and stress increase of tungsten polcide after annealing treatment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.297-305
• /
• 2000

It is observed that the initial properties and degradation characteristics on plasma of n/p-MOSFET with polycide and poly-Si as different gate materials under F-N stress and hot electron stress are affected by metal AR(Antenna Ratio) during plasma process. Compared to that of MOS devices with poly-Si gate material, reliability properties on plasma of MOS devices with polycide gate material are improved. This can be explained by that fluorine of tungsten polycide process diffuses through poly-Si into gate oxide and results in additional oxide thickness. The fact that MOS devices with polycide gate material can reduce damages of plasma process shows possibility that polycide gate material can be used as gate material for next generation MOS devices.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.7
• /
• pp.557-562
• /
• 2000

160nm thick amorphous Si and polycrystalline Si were each deposited on to 10nm thick SiO$_2$, Co monolayer and Co/Ti bilayer were sequentially evaporated to form Co-polycide. Then MOS capacitors were fabricated by BF$_2$ ion-implantation. The characteristics of the fabricated capacitor samples depending upon the drive-in annel conductions were measured to study the effects of thermal stability of CoSi$_2$and dopant redistribution on electrical properties of Co-polycide gates. Results for capacitors using Co/Ti bilayer and drive-in annealed at 80$0^{\circ}C$ for 20~40sec. showed excellent C-V characteristics of gate electrode.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.327-332
• /
• 1996

In this study, the effects of $WSi_x$, thickness and fluorine concentration in tungsten polycide gate structure on gate oxide were investigated. As $WSi_x$, thickness increases, gate oxide thickness increases with fluorine incorporation in gate oxide, and time-to-breakdown($T_{BD,50%}$) of oxide decreases. The stress change with $WSi_x$ thickness was also examined. But it is understood that the dominant factor to degrade gate oxide properties is not the stress but the fluorine, incorporated during $WSi_x$ deposition, diffused into $WSiO_2$ after heat treatment. In order to understand the effect of fluorine diffusion into oxidem fluorine ion implanted gates were compared. The thickness variation and $T_{BD,50%}$ of gate oxide is saturated over 600 $\AA$ thickness of $WSi_x$. The TEM and SIMS studies show the microstructure less than 600 $\AA$ thickness is dense and flat in surface. However, over 600$\AA$, the microstructure of $WSi_x$ is divided into two parts: upper porous phase with rugged surface and lower dense phase with smmoth interface. And this upper phase is transformed into oxygen rich crystalline phase after annealing, and the fluorine is captured in this layer. Therefore, the fluorine diffusion into the gate oxide is saturated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.449-452
• /
• 1999

NiSi were formed from either Ni monolayer or Ni/Ti bilayer and the SADS method was applied to fabricated PMOSFET with Ni-polycide gate electrodes. PMOSFET made from Ni monolayer showed thermal stability unto 300~40$0^{\circ}C$ for 600sec., and excellent C-V characteristics for long time of drive-in anneal than PMOSFET made from Ni/Ti bilayer. This was attributed to easier decomposition and subsequent Ni diffusion to SiO$_2$ layer, probably due to the presence of Ti unreducing process

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.6
• /
• pp.43-49
• /
• 1997

Tungsten poycide has studied gate oxide reliability and dielectric strength charactristics as the composition of gate electrode which applied submicron on CMOS and MOS device for optimizing gate electrode resistivity. The gate oxide reliability has been tested using the TDDB(time dependent dielectric breakdwon) and SCTDDB (stepped current TDDB) and corelation between polysilicon and WSi$_{2}$ layer. iN the case of high intrinsic reliability and good breakdown chracteristics on polysilicon, confirmed that tungsten polycide layer is a better reliabilify properities than polysilicon layer. Also, hole trap is detected on the polysilicon structure meanwhile electron trap is detected on polycide structure. In the case of electron trap, the WSi$_{2}$ layer is larger interface trap genration than polysilicon on large POCL$_{3}$ doping time and high POCL$_{3}$ doping temperature condition. WSi$_{2}$ layer's leakage current is less than 1 order and dielectric strength is a larger than 2MV/cm.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.141-141
• /
• 1999

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.05a
• /
• pp.14-14
• /
• 1997

• Korean Journal of Materials Research
• /
• v.3 no.6
• /
• pp.638-644
• /
• 1993

The degradation of dielectric breakdown field of 8nm-thick gate oxide ($SiO_2$) for Tipolycide MOS(meta1-oxide-semiconductor) capacitor with different annealing conditions and thickness of the polysilicon film on gate oxide was investigated. The degree of degradation in dielectric breakdown strength of the gate oxide for Ti-polycide gate became more severe with increasing annealing temperature and time, especially, for the case that thickness of the polysilicon film remained on the gate oxide after silicidation was reduced. The gate oxide degradation may be occurred by annealing although there is no direct contact of Ti-silicide with gate oxide. From SIMS analysis, it was confirmed that the degration of gate oxide during annealing was due to the diffusion of titanium atoms into the gate oxide film through polysilicon from the titanium silicide film.