• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.477-487
• /
• 2000

A series of poly(L-lactic acid) (PLLA)/poly($\beta$-hydroxynonanoate) (PHN) blend were prepared to study the miscibility and the crystallization behaviors. The thermal behaviors and characterization of PLLA/PHN blends Were studied using differential scanning calorimetry (DSC), XRD and polarizing optical microscopy (POM). The PLLA and PHN are partially miscible in amorphous region. The crystallinity of PLLA increased as the content of PHN increased, and T$_{g}$, T$_{c}$, and T$_{m}$ of PLLA shift as the content of PHN increased. Moreover, the number of PLLA spherulite increased as the content of PHN increased in the POM experiment. Thus, PHN acted as a nucleating agent to PLLA.

• Polymer(Korea)
• /
• v.25 no.3
• /
• pp.385-390
• /
• 2001

The A-B-A type block copoly(ester-ether)s consisting of poly(L-lactic acid) (PLLA)(A) and poly(oxyethylene-co-oxypropylene)(B) were prepared to improve the mechanical properties and hydrolyzability of PLLA. The block copolymers showed an improved flexibility due to the incorporation of the soft segments. Then, the same copolymer has an improved anti-thrombogenicity probably due to the specific microphase separation structure in the surface. The AFM of the film of the block copolymer revealed that the surface was quite flat in comparison with that of PLLA. Therefore, the flatness of the surface may be related with the increased anti-thrombogenicity of the copolymer film.

• Journal of Marine Bioscience and Biotechnology
• /
• v.11 no.2
• /
• pp.36-41
• /
• 2019

This study was conducted to analyze the difference in mechanically improved properties by distinguishing α-chitin and β-chitin for Poly(L-lactic acid)(PLLA). First, dissolution of chitins was established by mixing polar solvents hexafluoroisopropanol (HFIP) and trifluoroacetic acid (TFA) in appropriate proportions. Under these conditions, the dissolved chitin was used for electrospinning with other polymers. The electrospun nanofibers of the PLLA and chitins were successfully produced. Compared to the pristine state, when chitin was added to PLLA, the tensile strength increased 1.41 times (α-chitin), by 1.61 times (β- chitin), respectively. Based on this, it was confirmed that α- and β- chitin could be strategically used for different polymers. The results also suggest that chitin can be applied to various fields as good reinforcing material as well as electrospinning.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.461-468
• /
• 2018

Microspheres were prepared by solvent-evaporation method with Poly-L-lactic acid (PLLA) as a starting material, and the effects of preparation variables on microsphere shape and average particle size were investigated. As the concentration of PVA solution increased from 1 to 5 wt%, the average particle size decreased from $370{\mu}m$ to $160{\mu}m$ and then increased to $240{\mu}m$ at 7 wt%. On the other hand, As the addition volume of PVA solution increased from 10 mL to 50 mL, the average particle size decreased from $370{\mu}m$ to $220{\mu}m$. Also, as the stirring speed increased from 500 rpm to 1,500 rpm, the average particle size decreased from $370{\mu}m$ to $110{\mu}m$. When dichloromethane and chloroform were used as organic solvents, respectively, the average particle size did not show any significant difference. However, when dichloromethane was used, voids were observed on the particle surface, but when chloroform was used, smooth spherical particles were obtained.

• Advanced Composite Materials
• /
• v.16 no.4
• /
• pp.259-267
• /
• 2007

Mechanical reinforcement of an all-sustainable composite, composed of papyrus stem-milled particles as reinforcement and poly-L-lactic acid (PLLA) resin as matrix, was investigated. The papyrus particles (average diameter of $70{\mu}m$) could be well dispersed in PLLA resin up to 50 wt% without any surface modification. Young's modulus of the composite was 4.2 GPa at 50 wt% of the papyrus content. This is a two-fold increment in modulus as compared to that of the PLLA matrix. The tensile strength of the composite was almost constant around 48 MPa irrespective of the papyrus content. Temperature dependence of the storage modulus demonstrated that the incorporation of papyrus restricts the large drop in the modulus above the glass transition of PLLA.

• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.821-828
• /
• 2002

Regular and highly interconnected macroporous poly(L-lactic acid) (PLLA) scaffolds with pore size of 10∼300 ㎛ were fabricated through thermally induced phase separation of a PLLA-dioxane-water ternary system in the presence of a small amount of Pluronics. Addition of Pluronics to the ternary system raised the cloud-point temperature curve in the order of P-123< F-68< F-127. The Pluronics act as nuclei for the phase separation. This assistance is enhanced with increasing length of the hydrophilic PEO blocks in the Pluronics molecules. Liquid-liquid spinodal phase separation was induced at higher temperatures in the systems containing Pluronics because the spinodal region is raised to higher temperature. The absorption of Pluronics onto the interface stabilizes a macro scale structure and increases the interconnection of pores.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.7 s.262
• /
• pp.732-738
• /
• 2007

Effects of melt-mixing conditions on fracture properties of hydroxyapatite filled bioabsorbable poly(L-lactic acid)(HA/PLLA) composites was investigated by measuring the firacture toughness value of HA/PLLA composites prepared under different mixing time and rotor speed. The fracture surface morphology was also examined by profile measurement and scanning electron microscopies. It was found that the fracture toughness of HA/PLLA composites decreases due to decrease of ductile deformation of PLLA matrix and debonding of interfaces with increase of the rotor speed and mixing time. Effect of mixing process on neat PLLA was also assessed, and it was found that the fracture toughness of PLLA decreases due to disappearance of multiple craze formation and increase of defects. Such thermal and shear-stress degradation were found to be the primary mechanisms of the degradation of HA/PLLA composites during melt-mixing process.

• KSBB Journal
• /
• v.29 no.6
• /
• pp.405-413
• /
• 2014

In this study, gemcitabine (Gem)-Poly(L-lactic acid) (PLLA) conjugates were synthesized through an amide linkage reaction. Then, the microparticles of Gem-PLLA/PLLA blends containing gemcitabine were prepared using a supercritical fluid process, called aerosol solvent extraction system (ASES). Gemcitabine-loaded Gem-PLLA/PLLA microparticles obtained from the ASES process showed a spherical shape. The amount of gemcitabine released after 30 day incubation in a phosphate buffer solution of pH 7.4 was about 90% of the total amount of gemcitabine present in the product.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.1
• /
• pp.1-6
• /
• 2009

To overcome the stability problem of hydrophilic quantum dot (Q-dot), cellular uptake of hydrophobic instead of hydrophilic Q-dot was studied in the hope to find a simple method to use Q-dot as a cellular imaging probe. Hydrophobic Q-dot and poly-L-lactic acid (PLLA) were co-dissolved in chloroform to prepare stable films. Due to the cellular compatibility of PLLA, adherent cells were cultured on the film to observe the degree of Q-dot uptake and cytotoxicity of the prepared films. The results show that Q-dots were absorbed into NIH3T3 and EMT6 cells. Cellular uptake was also observed when hydrophobic Q-dots were coated directly on a glass plate. PLLA/Q-dot film and Q-dot coated on glass plate did not show major cytotoxicity. In vivo tumor model was also used to show the uptake of Q-dot from the PLLA/Q-dot film to the tumor site.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.244-254
• /
• 2018

Surface modified poly ${\text\tiny{L}}$-lactic acid (PLLA) samples with hydroxyapatite (HA), heparin and bone morphogenetic protein-2 (BMP-2) mediated by polydopamine (pDA) coating (PLLA/pDA/HA/Hep/BMP-2) were prepared, and their effects on the enhancements of bone formation and osseointegration were evaluated in vitro and in vivo as compared to PLLA, PLLA/pDA/HA, and PLLA/pDA/Hep/BMP-2. The changes in surface chemical compositions, morphologies and wettabilities were observed by X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM) and water contact angle measurements. Pre-coating of HA particles with pDA provided uniform and homogeneous anchoring of particles to PLLA surface. In addition, the strong ionic interaction between heparin and pDA led PLLA surface readily heparinized for loading of BMP-2. In vitro experiments revealed that the levels of alkaline phosphatase (ALP) activity, calcium deposition, and osteocalcin (OCN) gene expression were higher in MG-63 human osteosarcoma cell lines grown on PLLA/pDA/HA/Hep/BMP-2 than on control PLLA, PLLA/pDA/HA, and PLLA/pDA/Hep/BMP-2. In vivo studies using micro-computed tomography (micro-CT) also showed that PLLA/pDA/HA/Hep/BMP-2 screw exhibited greatest value of bone volume (BV) and bone volume/tissue volume (BV/TV) among samples. Histological evaluations with H&E and Von Kossa staining demonstrated that a combination of HA and BMP-2 contributed to the strong osseointegration.