DOI QR코드

DOI QR Code

Effect of Melt-mixing Conditions on Fracture Properties of Bioabsorbable HA/PLLA Composite Materials

생체흡수성 HA/PLLA 복합재료의 용융혼련조건이 파괴특성에 미치는 영향

  • 박상대 (고려대학교 의과대학 의공학교실) ;
  • 이덕보 (엔엔사이언스(주) 고장분석연구소)
  • Published : 2007.07.01

Abstract

Effects of melt-mixing conditions on fracture properties of hydroxyapatite filled bioabsorbable poly(L-lactic acid)(HA/PLLA) composites was investigated by measuring the firacture toughness value of HA/PLLA composites prepared under different mixing time and rotor speed. The fracture surface morphology was also examined by profile measurement and scanning electron microscopies. It was found that the fracture toughness of HA/PLLA composites decreases due to decrease of ductile deformation of PLLA matrix and debonding of interfaces with increase of the rotor speed and mixing time. Effect of mixing process on neat PLLA was also assessed, and it was found that the fracture toughness of PLLA decreases due to disappearance of multiple craze formation and increase of defects. Such thermal and shear-stress degradation were found to be the primary mechanisms of the degradation of HA/PLLA composites during melt-mixing process.

Keywords

References

  1. Leenslag, J.W., Pennings, A.J., Bos, R.R.M. and Boering, G., 1987, 'Resorbable Materials of Po1y(L-lactide). VI. Plates and Screws for Internal Fracture Fixation,' Biomaterials, Vol. 8, No.1, pp. 70-73 https://doi.org/10.1016/0142-9612(87)90034-2
  2. Bergsma, J.E., De Bruijin, W.C., Rozema, F.R., Bos, R.R.M. and Boering, G., 1995, 'Late Degradation Tissue Response to Poly(L-lactide) Bone Plates and Screws,' Biomaterials, Vol. 16, No.1, pp. 25-31 https://doi.org/10.1016/0142-9612(95)91092-D
  3. Bessho, K., Iizuka, T. and Murakami, K., 1997, 'A Bioabsorbable Poly-L-Iactide Miniplate and Screw System for Osteosynthesis in Oral and Maxillofacial Surgery,' Journal of Oral Maxillofacial Surgery, Vol. 55, No.9, pp. 941-945 https://doi.org/10.1016/S0278-2391(97)90065-3
  4. Turvey, T.A., Bell, R. B., Tejera, T. J. and Proffit, W.R, 2002, 'The Use of Self-reinforced Biodegradable Bone Plates and Screws in Orthognathic Surgery,' Journal of Oral Maxillofacial Surgery, Vol. 60, No.1, pp. 59-65 https://doi.org/10.1053/joms.2002.28274
  5. Verheyen, C.C.P.M., Klein, C.P.A.T., De BlieckHogervorst, J.M.A., Wolke, J.G.C., Van Blitterswijn, c.A. and De Groot, K., 1993, 'Evaluation of HydroxyapatitelPoly(L-lactide) Composites: Physicochemical Properties,' Journal of Materials Science: Materials in Medicine, Vol. 4, No. 1, pp. 58-65 https://doi.org/10.1007/BF00122979
  6. Ignjatovic, N.L., Plavsic, M., Miljkovic, M.S., Zivkovic, L.M. and Uskokovic, D.P., 1999, 'Microstructural Characteristics of Calcium Hydroxyapatite/ Poly-L-Iactide Based Composites,' Journal of Microscopy, Vol. 196, No.2, pp. 243-248 https://doi.org/10.1046/j.1365-2818.1999.00623.x
  7. Shikinami, Y. and Okuno, M., 1999, 'Bioabsorbable Devices Made of Forged Composites of Hydroxyapatite (HA) Particles and Po1y-L-1actide (PLLA): Part 1. Basic Characteristics,' Biomaterials, Vol. 20, No.9, pp. 859-877 https://doi.org/10.1016/S0142-9612(98)00241-5
  8. Deng, X., Hao, J. and Wang ,C, 2001, 'Preparation and Mechanical Properties of nanocomposites of Poly(D,L-lactide) with Ca-deficient Hydroxyapatite Nanocrystals,' Biomaterials, Vol. 22, No. 21, pp. 2867-2873 https://doi.org/10.1016/S0142-9612(01)00031-X
  9. Urayama, H., Ma, C. and Kimura, Y., 2003, 'Mechanical and Thermal Properties of Poly(L-lactide) Incorporating Various Inorganic Fillers with Particle and Whisker Shapes,' Macromolecular Materials and Engineering, Vol. 288, No.7, pp. 562-568 https://doi.org/10.1002/mame.200350004
  10. Park, S.-D., Todo, M. and Arakawa, K., 2003, 'Fracture Properties of Bioabsorbable HA/PLLA Composite Material,' Proceedings of The 4th Korea-Japan Joint Symposium on Composite Materials, October 16, pp. 35-36
  11. Park, S.-D., Todo, M., Arakawa, K. and Takenoshita, Y., 'Relationship between Microstructure and Fracture Behavior of Bioabsorbable HA/PLLA Composites,' Composites Part A: Applied Science and Manufacturing, (in press)
  12. ASTM D5045-91a