• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제15권4호
• /
• pp.300-304
• /
• 2015

A low bit rate speech coder based on the non-uniform sampling technique is proposed. The non-uniform sampling technique is based on the detection of inflection points (IP). A speech block is processed by the IP detector, and the detected IP pattern is compared with entries of the IP database. The address of the closest member of the database is transmitted with the energy of the speech block. In the receiver, the decoder reconstructs the speech block using the received address and the energy information of the block. As results, the coder shows fixed data rate contrary to the existing speech coders based on the non-uniform sampling. Through computer simulation, the usefulness of the proposed technique is shown. The SNR performance of the proposed method is approximately 5.27 dB with the data rate of 1.5 kbps.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제16권4호
• /
• pp.276-280
• /
• 2016

A fixed rate speech coder based on the filter bank and the non-uniform sampling technique is proposed. The non-uniform sampling is achieved by the detection of inflection points (IPs). A speech block is band passed by the filter bank, and the subband signals are processed by the IP detector, and the detected IP patterns are compared with entries of the IP database. For each subband signal, the address of the closest member of the database and the energy of the IP pattern are transmitted through channel. In the receiver, the decoder recovers the subband signals using the received addresses and the energy information, and reconstructs the speech via the filter bank summation. As results, the coder shows fixed data rate contrary to the existing speech coders based on the non-uniform sampling. Through computer simulation, the usefulness of the proposed technique is confirmed. The signal-to-noise ratio (SNR) performance of the proposed method is comparable to that of the uniform sampled pulse code modulation (PCM) below 20 kbps data rate.

• 대한기계학회논문집A
• /
• 제30권9호
• /
• pp.1116-1123
• /
• 2006

In this study, the effective method for reliability estimation is proposed using tow-staged kriging metamodel and genetic algorithm. Kriging metamodel can be determined by appropriate sampling range and the number of sampling points. The first kriging metamodel is made based on the proposed sampling points. The advanced f'=rst order reliability method is applied to the first kriging metamodel to determine the reliability and most probable failure point(MPFP) approximately. Then, the second kriging metamodel is constructed using additional sampling points near the MPFP. These points are selected using genetic algorithm that have the maximum mean squared error. The Monte-Carlo simulation is applied to the second kriging metamodel to estimate the reliability. The proposed method is applied to numerical examples and the results are almost equal to the reference reliability.

• 대한기계학회논문집A
• /
• 제31권1호
• /
• pp.55-61
• /
• 2007

Recently simulation model becomes an essential tool for analysis and design of a system but it is often expensive and time consuming as it becomes complicate to achieve reliable results. Therefore, high-fidelity simulation model needs to be replaced by an approximate model, the so-called metamodel. Metamodeling techniques include 3 components of sampling, metamodel and validation. Cross-validation approach has been proposed to provide sequnatially new sample point based on cross-validation error but it is very expensive because cross-validation must be evaluated at each stage. To enhance the cross-validation of metamodel, sequential sampling method using candidate points and representative cross-validation is proposed in this paper. The candidate and representative cross-validation approach of sequential sampling is illustrated for two-dimensional domain. To verify the performance of the suggested sampling technique, we compare the accuracy of the metamodels for various mathematical functions with that obtained by conventional sequential sampling strategies such as maximum distance, mean squared error, and maximum entropy sequential samplings. Through this research we team that the proposed approach is computationally inexpensive and provides good prediction performance.

• 물과 미래
• /
• 제29권2호
• /
• pp.129-141
• /
• 1996

일점연속 채취, 멱 속도 분포 및 Laursen의 토사농도 분포식을 이용한 총 부유 유사량 계산방법을 제안하였다. 이 방법은 미국 리오그안데 강에서 채취한 자료에 의해 검증되었다. 이 방법으로 계산된 농도분포는 $\beta$, $\kappa$, 그리고 w의 보편적인 값을 사용하여 계산한 보정 전수심 채취방법과 잘 일치하였다. 지역특성에 맞는 농도와 속도 분포식의 계수 x 와 z를 사용하였을 때는 더 좋은 결과를 얻을 수 있었다. 일점 채취에 사용한 이 방법과 일반적으로 많이 쓰는 전수심 채취를 사용한 방법과의 총 유사량의 차이는 채취때 생길 수 있는 오류 정도로 작은 것이었다. 일점 연속 채취에 의한 총 부유 유사량 측정은 여러 가지 중요한 이점을 가지고 있다. 채취 시간에 및 비용을 절감할 수 있으며 채취를 자주 할 수 있고 유사량 변화에 신속하게 대응할 수 명실상부 또한 이 방법은 미래에 추구해야 할 자동채취 방법으로 사용될 수 있다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.922-926
• /
• 2005

Progressively censored variables sampling plans are proposed for the lot acceptance of parts whose life follows Weibull distribution with known shape parameter. Progressive type-II censoring gives us not only time to failure but also degradation information. So, one can construct more flexible and more cost effective sampling plans. Design parameters of our sampling plan are determined by using the usual two-point approach.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.286-289
• /
• 1996

Two servo control algorithms are suggested to reduce the tracking error of a computer hard disk drive. One is the repetitive control to reduce the repeatable tracking error which is not explicitly taken into account in the design of a conventional controller. This algorithm was successfully applied to a commercial disk using a fixed point DSP. The other is the multi-rate sampling control which generates the control output between each sampling times since the sampling time of hard disk drives is limited. These algorithms were shown effectively to reduce tracking errors.

• Communications for Statistical Applications and Methods
• /
• 제19권2호
• /
• pp.237-246
• /
• 2012

다중 변환점(multiple change-point) 추론에 있어 소량자료에 관한 연구는 많지 않다. 본 논문에서는 소량 자료의 다중 변환점 추정을 위해 베이지안 비중심(noncentral) t 분포 변환점 모형을 제안하고, 제안된 모형 추론을 위해 메트로폴리스-해스팅스를 포함한 깁스 샘플링(Metropolis-Hastings-Within-Gibbs sampling) 알고리즘을 이용하였다. 모의실험 및 태풍 발생 수의 실증 분석결과는 제안된 모형과 알고리즘의 우수성을 보여 준다.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2005년도 춘계 학술발표회 논문집
• /
• pp.191-196
• /
• 2005

Knowing the time of the process change could lead to quicker identification of the responsible special cause and less process down time, and it could help to reduce the probability of incorrectly identifying the special cause. In this paper, we propose a MLE of the process change point when control charts with the fixed sampling rate (FSR) scheme or the variable sampling rate (VSR) scheme monitor a process to detect changes in the process mean and/or variance of a normal quality variable.

• 한국CDE학회논문집
• /
• 제15권1호
• /
• pp.33-42
• /
• 2010

In this study, new medial surface calculation methods using Voronoi diagrams are investigated for the point samples extracted on closed surface models. The medial surface is defined by the closure of all points having more than one closest point on the shape boundary. It is a one of essential geometric information in 3D and can be used in many areas such as 3D shape analysis, dimension reduction, freeform shape deformation, image processing, computer vision, FEM analysis, etc. In industrial parts, the idealized solid parts and shell shapes including sharp edges and vertices are frequently used. Other medial surface extraction methods using Voronoi diagram have inherent separation and branch problems, so that they are not appropriate to the sharp edged objects and have difficulties to be applied to industrial parts. In addition, the branched surfaces on sharp edges in shell shapes should be eliminated to obtain representative medial shapes. In order to avoid separation and branch problems, the new approach by analyzing the shapes and specially sampling on surfaces has been developed.