• Journal of the Korean Society of Safety
• /
• v.18 no.4
• /
• pp.130-135
• /
• 2003

This study is planned to investigate the compliance of small sized enterprises of under 5 employees directed by Industrial Safety and Health Act. Occupational safety regulation can be required for employer and employee to comply because that all members of workplace should be involved to protect worker's health. When all members of workplace comply with safety regulation, effectiveness of regulation will be realized as expectation. The study subject is composed of three groups as 501 employers, 501 employees of small sized enterprises of under 5 employees and 107 safety inspectors sampled by stratified random sampling for comparison. Data for analysis is collected from each sample using interview with structured questionnaires. Compliance is measured by 5 point scale composed by 8 sub items such as general perception, understanding, clearness, necessity, relevancy, implementation, penalty, and general compliance of the regulation. Among sub items of employer's compliance, the level of perception of regulation, necessity of regulation, relevancy of penalty are differentiated among three groups. The level of all 8 items of employee's compliance also differentiated among three groups. These results show that strategies for ensuring the same level of compliance among three groups will be needed through education, training and evaluation of regulation and feedback.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.3
• /
• pp.103-119
• /
• 2016

This study aims to assess habitat feature on the large-scale spawning ground of the Boreal Digging Frog Kaloula borealis in Daemyung retarding basin of Daegu, and to analyze the relationships between species abundance and meteorological factors for each habitat. Fifty-seven(57) pitfalls were installed to collect species abundance of 4 survey regions, and high-resolution satellite image, soil sampling equipment, digital topographic map, and GPS were used to develop habitat features such as terrain, soil, vegetation, human disturbance. The analysis shows that the frog is most abundant in sloped region with densely herbaceous cover in southern part of the retarding basin. In the breeding season, lowland regions, where Phragmites communis and P. japonica dominant wetlands and temporary ponds distributed, are heavily concentrated by the species for spawning and foraging. Located in between legally protected Dalsung wetands and lowland regions of the retarding basin, riverine natural levee is ecologically important area as core habitat for Kaloula borealis, and high number of individuals were detected both breeding and non-breeding seasons. Temperate- and pressure-related meteorological elements are selected as statistically significant variables in species abundance of non-breeding season in lowland and highland regions. However, in sloped regions, only a few variables are statistically significant during non-breeding season. Moreover, breeding activities in sloped regions are statistically significant with minimum temperature, grass minimum temperature, dew point temperature, and vapor pressure. Significant meteorological factors with habitat features are effectively applied to establish species conservation strategy of the retarding basin and to construct for avoiding massive road-kills on neighboring roads of the study sites, particularly post-breeding movements from spawning to burrowing areas.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.6
• /
• pp.1069-1078
• /
• 2001

Pattern grading is a technique used to increase or decrease the size of a garment pattern according to the measurements in a given size chart. The original pattern is graded and laid out for cutting before mass production. This study tried to classify body types for pattern grading of jacket by applying a concept of "drop"defined as the difference between chest girth and waist girth and the difference between hip girth and waist girth for pants. Data were collected through the stratified sampling method. 138 subjects were selected out of 1,290 subjects of our sample population. Findings were as follows : 1) For pattern grading of jacket, the cell with the chest girth of 96cm and the waist girth of 87cm had the highest frequency rate and body type was 87H type and the coverage of this type was 9.52%. Then, the size specification 87-96 was the center of distribution. H type had seven ones such as 72H, 75H, 78H, 81H, 84H. 87H and 90H. H type had 33 observations and frequency ratio of 26.19%. Same types could be graded up and down from the reference size for the age group. And this reference size became to the starting point for developing the grading system. 2) For pattern grading of pants, fatty types, H10 type had six ones such as 80H10. 82H10, 84H10, 86H10, 88H10 and 90H10. H10 type had 28 observations and frequency ratio of 20.29%. H6 type had 6 ones such as 84H6, 86H6, 88H6, 90H6. 92H6 and 94H6. H6 type had 27 observations and frequency ratio of 19.57%. If lower body types were classified as same ones, these types could be graded up and down proportionately.

• The KIPS Transactions:PartA
• /
• v.14A no.3 s.107
• /
• pp.133-140
• /
• 2007

The SWBF(shrink-wrapped boundary face) algorithm is a recent mesh reconstruction method for constructing a surface model from a set of unorganized 3D points. In this paper, we point out the surface duplication problem of SWBF and propose an improved mesh reconstruction scheme. Our method tries to classify the non-boundary cells as the inner cell or the outer cell, and makes an initial mesh without surface duplication by adopting the improved boundary face definition. To handle the directional unbalance of surface sampling density arise in typical 3D scanners, two dimensional connectivity in the cell image is introduced and utilized. According to experiments, our method is proved to be very useful to overcome the surface duplication problem of the SWBF algorithm.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.2
• /
• pp.99-108
• /
• 2013

The purpose of this study was to analyze the kinematic characteristics of javelin to compare the characteristics between world elite athletes and local male athletes. The subjects selected 9 athletes out of total 13 athletes recorded more than 65 m in the preliminary and main competition participated in the 93rd National Sports Festival held in 2012. Three-Dimensional motion analysis using a system of 4 video cameras(Sony HXR-MC2000) at a sampling frequency of 60 fields/s was performed for this study. The Kwon3D 3.1 was used to obtain the three dimensional coordinates about the top, grip, end of javelin. And the kinematic factors of javelin calculated using Matlab2009a program. The resultant speed of javelin that affects directly to the record of performance showed 26.08 m/s indicated lower speed of about 2-3 m/s than world elite athletes. The release point appeared to have been made at the high of $1.79{\pm}0.07$ m of 99.8% of the height of the athletes. In terms of release angle, it was indicated average $33.0{\pm}3.81^{\circ}$ lower release angle compared to the world elite athletes. The attitude angle(up & down tilt angle, X axis) related to javelin indicated average $38.5{\pm}4.96^{\circ}$, its related attack angle average $5.5{\pm}5.11^{\circ}$, and yaw angle(sideslip, side attack angle) average $15.7{\pm}8.48^{\circ}$.

• 한국해양학회지
• /
• v.30 no.2
• /
• pp.138-146
• /
• 1995

Present study was performed to describe the growth of Leptochela gracilis (STIMPSON, 1860), the dominant species of the coastal water near Kanghwa Island, Korea. Samples were collected from 1 sampling point by long bag seine net at monthly interval from April 1993 to January 1994 except for August 1993. In the population study of Leptochela gracilis, ovigerous female has appeared from April to September 1993 and the ratio (egg-bearing female/female) showed over 70% from May to July 1993. Female individuals were predominant from May 1993 to January 1994 and it was found that sex ratios were not significantly different between pregnant and non-pregnant period(p>0.05). The population of Leptochela gracilis was divided into 2 types of generation; i) short term generation. and ii) long term generation. Longevity of the long term generation was presumed to vary from 12 to 15 months. In the case of short term generation, spawned by egg-bearing stock of September, however, it was not certain whether they absorbed in the long term generation, thus overcome winter season or die after December by environment factors. The growth in cavalcade length of the long term generation was better fitted to Pauly and Gaschutz model than Von Bertalanffy.

• Journal of Biomedical Engineering Research
• /
• v.17 no.4
• /
• pp.449-458
• /
• 1996

Most of the conventional electrocardiowaphs foil to detect signals other than P-QRS-T due to the limited SNR and bandwidth. High-resolution electrocardiography(HRECG) provides better SNR and wider bandwidth for the detection of micro-potentials with higher frequency components such as vontricular late potentials(LP). We have developed a HRECG using uncorrected XYZ lead for the detection of LPs. The overall gain of the amplifier is 4000 and the bandwidth is 0.5-300Hz without using 60Hz notch filter. Three 16-bit A/D converters sample X, Y, and Z signals simultaneously with a sampling frequency of 2000Hz. Sampled data are transmitted to a PC via a DMA-controlled, optically-coupled serial communication channel. In order to further reduce the noise, we implemented a signal averaging algorithm that averaged many instances of aligned beats. The beat alignment was carried out through the use of a template matching technique that finds a location maximizing cross-correlation with a given beat tem- plate. Beat alignment error was reduced to $\pm$0.25ms. FIR high-pass filter with cut-off frequency of 40Hz was applied to remove the low frequency components of the averaged X, Y, and Z signals. QRS onset and end point were determined from the vector magnitude of the sigrlaIL and some parameters needed to detect the existence of LP were estimated. The entire system was designed for the easy application of the future research topics including the optimal lead system, filter design, new parameter extraction, etc. In the developed HRECG, without signal averaging, the noise level was less than 5$\mu$V$_rms RTI$. With signal averaging of at least 100 beats, the noise level was reduced to 0.5$\mu$V$_rms RTI$, which is low enough to detect LPs. The developed HRECG will provide a new advanced functionality to interpretive ECG analyzers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1709-1716
• /
• 2007

In this paper, ADC with multi SHA structure is proposed for high speed operation. The proposed structure incorporates a multi SHA block that consists of multiple SHAs of identical characteristics in parallel to improve the conversion speed. The designed multi SHA is operated by non-overlapping clocks and the sampling speed can be improved by increasing the number of multiplexed SHAs. Pipelined A/D converter, applying the proposed structure, is designed to satisfy requirement of analog front-end of VDSL modem. The measured INL and DNL of designed A/D converter are $0.52LSB{\sim}-0.50LSB$ and $0.80LSB{\sim}-0.76LSB$, respectively. It satisfies the design specifications for VDSL modems. The simulated SNR is about 66dB which corresponds to a 10.7 bit resolution. The power consumption is 24.32mW.

• Korean Journal of Remote Sensing
• /
• v.26 no.3
• /
• pp.347-359
• /
• 2010

Ortho-photos provide valuable spatial and spectral information for various Geographic Information System (GIS) and mapping applications. The absence of relief displacement and the uniform scale in ortho-photos enable interested users to measure distances, compute areas, derive geographic locations, and quantify changes. Differential rectification has traditionally been used for ortho-photo generation. However, differential rectification produces serious problems (in the form of ghost images) when dealing with large scale imagery over urban areas. To avoid these artifacts, true ortho-photo generation techniques have been devised to remove ghost images through visibility analysis and occlusion detection. So far, the Z-buffer method has been one of the most popular methods for true ortho-photo generation. However, it is quite sensitive to the relationship between the cell size of the Digital Surface Model (DSM) and the Ground Sampling Distance (GSD) of the imaging sensor. Another critical issue of true ortho-photo generation using high resolution satellite imagery is the scan line search. In other words, the perspective center corresponding to each ground point should be identified since we are dealing with a line camera. This paper introduces alternative methodology for true ortho-photo generation that circumvents the drawbacks of the Z-buffer technique and the existing scan line search methods. The experiments using real data are carried out while comparing the performance of the proposed and the existing methods through qualitative and quantitative evaluations and computational efficiency. The experimental analysis proved that the proposed method provided the best success ratio of the occlusion detection and had reasonable processing time compared to all other true ortho-photo generation methods tested in this paper.

• Journal of Climate Change Research
• /
• v.6 no.4
• /
• pp.303-310
• /
• 2015

This study was conducted to estimate of carbon stock and greenhouse gas (GHGs) removals by tree species and forest type at Gangwon province. We used a point sampling data with permanent sample plots in national forest inventory and national emission factors. GHGs emissions was caclulated using the stock change method related to K-MRV and IPCC guidance. Total carbon stock and greenhouse gas removals were high in deciduous forest and species than in coniferous. The range of annual net greenhouse gas emissions in other deciduous species was from $-11,564.83Gg\;CO_2\;yr^{-1}$ to $-13,500.60Gg\;CO_2\;yr^{-1}$ during 3 years (2011~2013). On the other hand, coniferous forest was temporally converted to source due to reducing of growing stock in 2012. It was that growing stocks and forest area were likely to reduce by the deforestation and clear cutting. This study did not consider other carbon pools (soil and dead organic matter) due to the lack of data. This study needs to complement the activity data and emission factors, and then will find the way to calculate the greenhouse gas emissions and removals in the near future.